Author Topic: My OPK packages for the RS-90 (Opendingux) (Read 33931 times)

gameblabla · « **Reply #180 on:** July 06, 2019, 01:43:07 pm »

Fixed up the Divi-Dead port because it would not playback OGG music files at all and i had also mistakenly disabled Audio support.
This should be fixed now. (including the voice acting glory and all)

Now i'll look into Oswan and i can see what ChronoStriker1 encounters with Oswan. Hope i can fix it.

EDIT: Fixed a few issues with Oswan and i also profiled it for best performance. As usual, you can grab the updated OPKs in the first link.

ChronoStriker1 · « **Reply #181 on:** July 06, 2019, 02:44:32 pm »

I'm glad you found a fix, but this one I'm pretty sure was caused by my own stupidity. Unlike my other romsets I forgot to unzip my wonderswan roms... Works well when they are unzipped. Thank you for looking at it. Also Divi-Dead is working well with sound.

Sipulka · « **Reply #182 on:** July 06, 2019, 04:46:21 pm »

gameblabla, great job, thanks, everything works

gameblabla · « **Reply #183 on:** July 15, 2019, 10:09:51 pm »

Bump, i took a look at FCEUX and PGO'd it, in addition to trying out GCC 9.1 along with it.
SMB3 now runs at 50 FPS with no overclocking (360Mhz) and when overclocked at 456Mhz, it manages to hit 60 FPS consistently.

I may try out other emulators again as a result (probably Oswan or Temper) but for now i think this will do for most NES games.
Just overclock it and you should be fine.

Grab the new OPK in the first post.

SkyingHigh · « **Reply #184 on:** July 16, 2019, 09:28:48 pm »

Thank you for all your hard work! Do you think it's possible to get NGP on this or will the hardware be too slow? Thanks again!

gameblabla · « **Reply #185 on:** July 16, 2019, 10:24:31 pm »

Quote from: SkyingHigh on July 16, 2019, 09:28:48 pm

Thank you for all your hard work! Do you think it's possible to get NGP on this or will the hardware be too slow? Thanks again!

It could be possible but i would need to use RaceOD rather than my Neo geo pocket fork as this will run too slowly on the RS-90...

kokokool · « **Reply #186 on:** July 18, 2019, 02:32:53 pm »

Quote from: gameblabla on July 15, 2019, 10:09:51 pm

Bump, i took a look at FCEUX and PGO'd it, in addition to trying out GCC 9.1 along with it.
SMB3 now runs at 50 FPS with no overclocking (360Mhz) and when overclocked at 456Mhz, it manages to hit 60 FPS consistently.

I may try out other emulators again as a result (probably Oswan or Temper) but for now i think this will do for most NES games.
Just overclock it and you should be fine.

Grab the new OPK in the first post.

Thanks for the update, but i tested Megaman II and still has issues with performance, even with 456 mhz overclock. SMB3, yes its running perfect. but the other games i've tested does not hit 60 fps fluently.

gameblabla · « **Reply #187 on:** July 18, 2019, 04:58:48 pm »

Quote from: kokokool on July 18, 2019, 02:32:53 pm

Thanks for the update, but i tested Megaman II and still has issues with performance, even with 456 mhz overclock. SMB3, yes its running perfect. but the other games i've tested does not hit 60 fps fluently.

Then by that point it will require another emulator... Did you try to turn on the framerate counter ? How well does it run ?

kokokool · « **Reply #188 on:** July 18, 2019, 05:47:55 pm »

Quote from: gameblabla on July 18, 2019, 04:58:48 pm

Quote from: kokokool on July 18, 2019, 02:32:53 pm
Thanks for the update, but i tested Megaman II and still has issues with performance, even with 456 mhz overclock. SMB3, yes its running perfect. but the other games i've tested does not hit 60 fps fluently.
Then by that point it will require another emulator... Did you try to turn on the framerate counter ? How well does it run ?

Ill check it today and I'll let you know

gameblabla · « **Reply #189 on:** August 31, 2019, 12:24:01 am »

Here's a test version of Stella for the RS-90. Note that it might not work as i can't find my Retromini yet.
If it does run, then i'll optimize it later.

EDIT: See Below

Super Breakout Amateur · « **Reply #190 on:** August 31, 2019, 08:12:44 am »

it does not show up in the emulators menu

gameblabla · « **Reply #191 on:** September 01, 2019, 05:38:20 pm »

https://gameblabla.nl/files/ipk/rs90/stella_rs90.opk

Alright, so found my RS-90 and fixed that up. It was running a bit slower but now it should run fullspeed most of the time.
(except in some circumstances)
I also fixed the sound compared to last build.

Now, this doesn't support 64k homebrew games or ones using any enhancement chips. (Reason being that it would be too CPU intensive for this device anyway, in fact this version of Stella does not even run that well)

gameblabla · « **Reply #192 on:** September 01, 2019, 07:33:55 pm »

... and i also ported Prosystem too, an Atari 7800 emulator.
Like Stella, it runs most games fine with some exceptions.

It's available in the first post, just follow the link.

kokokool · « **Reply #193 on:** September 03, 2019, 06:50:02 pm »

Quote from: gameblabla on September 01, 2019, 07:33:55 pm

... and i also ported Prosystem too, an Atari 7800 emulator.
Like Stella, it runs most games fine with some exceptions.

It's available in the first post, just follow the link.

Ill test this today.
Thanks a lot!

Enviado desde mi iPhone utilizando Tapatalk

Super Breakout Amateur · « **Reply #194 on:** September 03, 2019, 07:02:30 pm »

one question
is there some sort of opk package explorer, other than openpackagecreator?

kokokool · « **Reply #195 on:** September 04, 2019, 03:05:08 pm »

Quote from: kokokool on September 03, 2019, 06:50:02 pm

Quote from: gameblabla on September 01, 2019, 07:33:55 pm
... and i also ported Prosystem too, an Atari 7800 emulator.
Like Stella, it runs most games fine with some exceptions.

It's available in the first post, just follow the link.
Ill test this today.
Thanks a lot!

Enviado desde mi iPhone utilizando Tapatalk

Works great! Good job there!!

Enviado desde mi iPhone utilizando Tapatalk

xsoteria777x · « **Reply #196 on:** February 26, 2020, 12:56:56 pm »

Will gnuboy ever get better or is it the best we will ever have?

drowsnug · « **Reply #197 on:** March 01, 2020, 04:38:46 pm »

Quote from: xsoteria777x on February 26, 2020, 12:56:56 pm

Will gnuboy ever get better or is it the best we will ever have?

Do you mention about gnuboy's graphics?
If so, I modified scaling options.

Try this opk file.
https://drive.google.com/open?id=17Kci5STGTOlr_SQC2Op7v3WxQ7dYfaEA

xsoteria777x · « **Reply #198 on:** March 08, 2020, 01:18:24 pm »

Is this an updated opk? If so wow thank you

xsoteria777x · « **Reply #199 on:** March 08, 2020, 07:32:06 pm »

Thank you so much this is exactly what I think I wanted. Need to play with it a bit but looks awesome. Love the pallets as well

Author Topic: My OPK packages for the RS-90 (Opendingux) (Read 33931 times)

gameblabla (OP)

gameblabla (OP)

gameblabla (OP)

gameblabla (OP)

gameblabla (OP)

gameblabla (OP)

gameblabla (OP)