Author Topic: RetrogamePlus V2 & RS97 V3.0 only Comic-book themed cfw 24-05-19  (Read 2737 times)

Jutleys (OP)

  • *** Moderator
  • Posts: 1937
    • Retrogamers97-90
Visit my websites here https://retrogamehandhelds.com/

Specs
Screen: 2.6 inch 4:3 240*320
CPU: JZ4760B mips
528mhz-up to 740Mhz
RAM: 128M DDR2
Internal memory: 16GB
Battery: BL-5C 1020 mAh
lithium battery

Big Thanks to Tony-jih, Steward-Fu ,Ping_Flood,sauce,jbanes,dinosaw_act,benob,jack83,hi-ban,simpleasy,Fontes,m1024 and all the other contributors for all the hard work.

***NOTE THIS CFW CAN BE USED FOR RETROGAMEPLUS V2 & RS97 V3.0 ONLY***

RetrogamePLUS v2 this device is basically the same hardware as the latest RS97 3.0 systems it has the JZ4760B mips cpu inside.Please use the pre-patched or the base firmwares below you can find support for this device on my website below and my discord channel.

Huge thanks to SimpleasyProudly presenting his skin Comicbook for RETROGAMEPLUSv2 & RS90 V3.0


RetrogameplusV2 RS97 V3.0 only RetroFW firmware updated latest packages 24/05/19

Revision 2.1 JZ4760B Full https://rs97.bitgala.xyz/RG_PLUS_V2/FULL%20CFW/RetrogamePlusV2-CFW-Comic-book.24-05-19.img.7z


Revision 2.1 JZ4760B base FW only no ipk files https://rs97.bitgala.xyz/RG_PLUS_V2/BASE%20CFW/RetroFW.7z



Instructions
? write RetroFW.img above to your internal SD card (the sd card is under the battery)
using win32diskimager or etcher

? It shouldn't take long. Windows will pop up with those errors, just cancel out of those errors, and safely remove your card reader.

? First boot of your retrogameplusV2, you'll see the RETROFW image as the boot screen your have to expand the fat32 partition to reclaim the sd card space use any partition tool to resize it.

? It will reboot when it's finished, and then you'll see GmenuNX with all it's stock settings  ?


LATEST IPK Files here https://rs97.bitgala.xyz/00.%20Ipk%20releases/
« Last Edit: May 25, 2019, 12:16:56 pm by Jutleys »

ChrisRR

  • *
  • Posts: 54
Re: RetrogamePlus V2 & RS97 V3.0 only Comic-book themed cfw 24-05-19
« Reply #1 on: May 24, 2019, 11:53:52 pm »
I've not heard about the RS-97 plus v2.  From the look of your site it has a 60Hz screen, but is the screen tearing gone?  Does this CFW make it worth buying one nowadays?

Jutleys (OP)

  • *** Moderator
  • Posts: 1937
    • Retrogamers97-90
Re: RetrogamePlus V2 & RS97 V3.0 only Comic-book themed cfw 24-05-19
« Reply #2 on: May 25, 2019, 12:16:17 pm »
Yes confirmed by me :)

wiewiec

  • *
  • Posts: 5
Re: RetrogamePlus V2 & RS97 V3.0 only Comic-book themed cfw 24-05-19
« Reply #3 on: May 26, 2019, 03:16:03 pm »
How to spot if I have RS 97 Plus V2 version?



wiewiec

  • *
  • Posts: 5
Re: RetrogamePlus V2 & RS97 V3.0 only Comic-book themed cfw 24-05-19
« Reply #6 on: May 26, 2019, 09:45:46 pm »
But I have slot and matter screen... Noticed tearing only in NES emulator from OFW...

hutzero

  • *
  • Posts: 12
Re: RetrogamePlus V2 & RS97 V3.0 only Comic-book themed cfw 24-05-19
« Reply #7 on: May 27, 2019, 07:57:15 am »
Where I can buy RetrogamePlus V2.

mrgeekmomo

  • Posts: 2
Re: RetrogamePlus V2 & RS97 V3.0 only Comic-book themed cfw 24-05-19
« Reply #8 on: May 27, 2019, 01:21:25 pm »
How to spot if I have RS 97 Plus V2 version?

http://boards.dingoonity.org/retrogamers-97/retrogameplus-v2-rs97-v3-0-only-comic-book-themed-cfw-24-05-19/?action=dlattach;attach=7566;image

Huge thanks! I have good one! Let's flash it :)

I?ve found the same image and it looks like version 2, but when I open my console i can read RetroPlus V1.0... so not sure what?s the correct.


Enviado desde mi iPhone utilizando Tapatalk

Jutleys (OP)

  • *** Moderator
  • Posts: 1937
    • Retrogamers97-90
Re: RetrogamePlus V2 & RS97 V3.0 only Comic-book themed cfw 24-05-19
« Reply #9 on: May 27, 2019, 03:28:16 pm »
flash the cfw it will only work on V2 devices :)

mrgeekmomo

  • Posts: 2
Re: RetrogamePlus V2 & RS97 V3.0 only Comic-book themed cfw 24-05-19
« Reply #10 on: May 27, 2019, 05:17:17 pm »
flash the cfw it will only work on V2 devices :)

Thanks for the reply. Also, let me tell you that it comes with a 32gb memory inside! Is this normal?


Enviado desde mi iPhone utilizando Tapatalk

Jutleys (OP)

  • *** Moderator
  • Posts: 1937
    • Retrogamers97-90
Re: RetrogamePlus V2 & RS97 V3.0 only Comic-book themed cfw 24-05-19
« Reply #11 on: June 03, 2019, 09:46:30 am »
16gb is normal

FreudKrueger

  • *
  • Posts: 8
Re: RetrogamePlus V2 & RS97 V3.0 only Comic-book themed cfw 24-05-19
« Reply #12 on: June 16, 2019, 09:12:20 am »
In what difference from RETROFW v.1.2? The video output works?

Alien Grey

  • ***
  • Posts: 1409
Re: RetrogamePlus V2 & RS97 V3.0 only Comic-book themed cfw 24-05-19
« Reply #13 on: June 24, 2019, 09:45:56 am »
Does it support larger capacity (more than 32GB) MicroSD cards with UHS-I interface?

Just want to know that so I don't end up with any MicroSD cards that can't be used.
Dingoo A-380 CFW V2.11.09 "RetroDD" - 2 x SanDisk SDHC 32GB Class 10 MicroSD Inside - 2 x Dingoo F-16 Wireless Game Controller

ace9094

  • *
  • Posts: 434
Dingoo A320, GCW0, RS-97 x2, Revo-K101, RS-90, PSP, GameGadget, New 3DS 128GB, PS Vita 200GB, RS-45, Gamebox Advance and a few other obscure devices

a330boy

  • *
  • Posts: 100
Re: RetrogamePlus V2 & RS97 V3.0 only Comic-book themed cfw 24-05-19
« Reply #15 on: August 21, 2019, 12:33:25 am »
Thanks Jutleys!

This is a newer model and an amazing device that finally satisfies my retro gaming needs.

 

Post a new topic
Post a new topic