Dingoonity.org

Other Portable Consoles => Ingenic JZ47xx Devices => Retro Game 350/RG-350 => Topic started by: Ninoh-FOX on December 13, 2019, 06:38:08 pm

Title: RG350 "ROGUE" CFW
Post by: Ninoh-FOX on December 13, 2019, 06:38:08 pm
RG350 firmware "Rogue" edition

(https://raw.githubusercontent.com/Ninoh-FOX/RG350-ROGUE-CFW/master/logos/logo.png)
https://www.paypal.me/NinohFOX only for beers
An independent fork of the OpenDingux project, focused on improving the user experience.

Thanks to Tonyjin for toolchain (https://github.com/tonyjih)

Special Thanks to Pcercuei (https://github.com/pcercuei), Mthuurne (https://github.com/mthuurne) and opendingux (https://github.com/OpenDingux) for the original code base system.
Goals:

exFAT support (done), auto-resize (done), constant sdcard mount point (done), show version (done)- 1.7.5 branch
Replace Gmenu2x with GmenuNX, Add Esoteric how optional launcher (done) - 1.7.9 brach


In proyect:

Kernel update,  Hibernate capability - 2.x branch

Modernize 3D APIs - 2.1.x

HDMI support - 2.2.x

Update firmware 1.7.11u3M
https://github.com/Ninoh-FOX/RG350-ROGUE-CFW/releases/tag/1.7.11u3M

Update firmware 1.7.10u3
https://github.com/Ninoh-FOX/RG350-ROGUE-CFW/releases/tag/1.7.10u3

Update firmware 1.7.11u2M
https://github.com/Ninoh-FOX/RG350-ROGUE-CFW/releases/tag/1.7.11u2M

Update firmware 1.7.10u2
https://github.com/Ninoh-FOX/RG350-ROGUE-CFW/releases/tag/1.7.10u2

firmware 1.7.11u1M
https://github.com/Ninoh-FOX/RG350-ROGUE-CFW/releases/tag/1.7.11u1M

Update firmware 1.7.10u1
https://github.com/Ninoh-FOX/RG350-ROGUE-CFW/releases/tag/1.7.10u1

firmware 1.7.11M
https://github.com/Ninoh-FOX/RG350-ROGUE-CFW/releases/tag/1.7.11M

Update firmware 1.7.10
https://github.com/Ninoh-FOX/RG350-ROGUE-CFW/releases/tag/1.7.10

Update firmware 1.7.10M
https://github.com/Ninoh-FOX/RG350-ROGUE-CFW/releases/tag/1.7.10M

Update firmware 1.7.9.9Z
https://github.com/Ninoh-FOX/RG350-ROGUE-CFW/releases/tag/1.7.9.9R

Update firmware 1.7.9.9R
https://github.com/Ninoh-FOX/RG350-ROGUE-CFW/releases/tag/1.7.9.9R

Update firmware 1.7.9.9
https://github.com/Ninoh-FOX/RG350-ROGUE-CFW/releases/tag/1.7.9.9

Update firmware 1.7.9.8
https://github.com/Ninoh-FOX/RG350-ROGUE-CFW/releases/tag/1.7.9.8

Update firmware 1.7.9.7
https://github.com/Ninoh-FOX/RG350-ROGUE-CFW/releases/tag/1.7.9.7

Update firmware 1.7.9.6
https://github.com/Ninoh-FOX/RG350-ROGUE-CFW/releases/tag/1.7.9.6

Update firmware 1.7.9.5
https://github.com/Ninoh-FOX/RG350-ROGUE-CFW/releases/tag/1.7.9.5

Update firmware 1.7.9.4
https://github.com/Ninoh-FOX/RG350-ROGUE-CFW/releases/tag/1.7.9.4

Update firmware 1.7.9.3
https://github.com/Ninoh-FOX/RG350-ROGUE-CFW/releases/tag/1.7.9.3

Kernel update 1.7.9.2
https://github.com/Ninoh-FOX/RG350-ROGUE-CFW/releases/tag/Kernel_1.7.9.2

Adjusted the 100% long time battery

update firmware 1.7.9.2 fix:
https://github.com/Ninoh-FOX/RG350-ROGUE-CFW/releases/tag/1.7.9.2fix

update firmware 1.7.9.2:
https://github.com/Ninoh-FOX/OpenRGH/releases/tag/1.7.9.2

update firmware 1.7.9.1:
https://github.com/Ninoh-FOX/OpenRGH/releases/tag/1.7.9.1

update firmware 1.7.9:
https://github.com/Ninoh-FOX/OpenRGH/releases/tag/1.7.9

update firmware 1.7.8.2:
https://github.com/Ninoh-FOX/OpenRGH/releases/tag/1.7.8.2

update firmware 1.7.8.1:
https://github.com/Ninoh-FOX/OpenRGH/releases/tag/1.7.8.1

update firmware 1.7.8:
https://github.com/Ninoh-FOX/OpenRGH/releases/tag/1.7.8

Changelog:

- 1.7.11M and 1.7.10 updates:

fix rumble weak "motor"
updated alsalib to version 1.2.4
updated alsamixer to version 1.1.7
add libpng 16 from OD
fixed sound mute level in pcm
fixed sound crashes in some emulators (you have to delete the old temper settings from the folder /usr/local/home/.temper/config/)
updated Picodrive emulator to 1.97 https://github.com/irixxxx/picodrive
recompiled Temper 1.24.2 https://github.com/gameblabla/temper/tree/f3328369d5e00e70b9c2ea095e09b1dec6452de5
updated pr-boom+ to OD-pr-boom+
The aspect ratio and the sharpness of the screen are now saved so they are not reset on reboot, also, you can change the sharpness also in the settings menu of Gmenu2x

- 1.7.11M:

fixed grafics FBA, NEOGEO and NGP in RG350M

- 1.7.10/M:

-gmenu2x-
Several changes have been added, including:

option to activate or deactivate analogs from settings.
option to change brightness
new theme in pixel mode (this does not choke all fonts)
New way to monitor the battery.
the titles can now be read in two lines
there are more changes, but I don't remember them all XD
-kernel-

boot mode has been changed, now read mininit-syspart file from boot partition. This way you can update without having to recompile the kernel.

Added DRM drivers, in case one day the hdmi code for 3.12 comes out

cleaned unnecessary drivers.

gpu frequency corrected according to the cpu.

Battery capacity has been corrected.

-General-

Added support for RG350M
Added ROGUE Manual
Added news combo keys (see the manual)

- 1.7.9.9Z:

-gmenu2x-

Now you can change the brightness from options menu of the gmenu2x

-SOUND-

Finally, all sounds problems is fixed, yes, fixed, now the default volume control is Master, and the volumen keys works with this, anyway, you can change the pcm and heardphones values is you wish and the console save the changes for the next reboot.

(https://raw.githubusercontent.com/Ninoh-FOX/POCKETGO2_ROGUE_CFW/master/screenshots/screenshotalsa.png)

-apps-

Added Pixel-Fixer, for fix dead pixels if is possible.



- 1.7.9.9R:

-Gmenu2-

1. Update GMENU2x, now it shows the internal language of the game, if it has it, according to the selected language.

2. Add Korean, Japanses and Chinese language.

3. fixed some missing texts.

4. Optimized themes, now overwrites system icons too.

5. Changed multi-language fonts to a much more comfortable one to read.

(https://raw.githubusercontent.com/Ninoh-FOX/POCKETGO2_ROGUE_CFW/master/screenshots/screenshot101.png)

(https://raw.githubusercontent.com/Ninoh-FOX/POCKETGO2_ROGUE_CFW/master/screenshots/screenshot102.png)

(https://raw.githubusercontent.com/Ninoh-FOX/POCKETGO2_ROGUE_CFW/master/screenshots/screenshot103.png)

(https://raw.githubusercontent.com/Ninoh-FOX/POCKETGO2_ROGUE_CFW/master/screenshots/screenshot104.png)

(https://raw.githubusercontent.com/Ninoh-FOX/POCKETGO2_ROGUE_CFW/master/screenshots/screenshot105.png)

(https://raw.githubusercontent.com/Ninoh-FOX/POCKETGO2_ROGUE_CFW/master/screenshots/screenshot106.png)


IMPORTANT: You have to delete the file /media/data/.linker so that all the changes are overwritten, otherwise there will be no opks that lose the name.

-Sound-

1. Now the volume of the headphones is also saved.

2. the Master volume control is now accessible from the SOUND MIXER, it is no longer necessary to modify the speaker to lower the volume.

-System-

1. Fixed APP's ROGUE problems with some screens, changed of 32Bpp to 16Bpp.

2. Optimized the clock of the GPU, now it is to the maximum recommended by the chip. (before 360Mhz, now 500Mhz)

3. Optimized the USB core, there will be no more random restarts when the console was disconnected from the computer.

You can see all the changes in the toolchain and kernel sections of my repositories

- 1.7.9.9:

Update Rogue Update Manager for fix the download error in flasher packages.

Add Rogue App Store (Thanks to Rafa Vico).

(https://raw.githubusercontent.com/Ninoh-FOX/RG350-ROGUE-CFW/master/screenshots/screenshot001.png)

(https://raw.githubusercontent.com/Ninoh-FOX/RG350-ROGUE-CFW/master/screenshots/screenshot002.png)

(https://raw.githubusercontent.com/Ninoh-FOX/RG350-ROGUE-CFW/master/screenshots/screenshot003.png)

(https://raw.githubusercontent.com/Ninoh-FOX/RG350-ROGUE-CFW/master/screenshots/screenshot004.png)

- 1.7.9.8:

Add Rogue Update Manager (thanks to Rafa Vico).

(https://raw.githubusercontent.com/Ninoh-FOX/RG350-ROGUE-CFW/master/screenshots/screenshot013.png)
(You need a compatible usb wifi adapter for that this works)

Fixed dpad-analog emulator.

Update linux-firmware package to the last version (16-03-2020)

In the previews on fullscreen now you can changer the opacy in gmenu2x options.

- 1.7.9.7:

Add ext2 support.

- 1.7.9.6:

Fixed buttons orden in DinguxCommander.

Fixed buttons and colors in GCW-Connect and change name to ROGUE Connect.

add script for format the external sdcard in ext4.

kernel update modules usb wifi drivers.

Remove esoteric from rootfs, you can use this via opk.

- 1.7.9.5:

Fixed and updated SDL2 libraries.

Insert Scriptrunner app, now you can format the external sdcard in fat32, exfat or ext3 in the console.

Fixed errors in games that not run.

Fixed Gmenu2x duplicate icons when this is edit

- 1.7.9.4:

Fix clock hour reset when poweroff the console.

Gmenu2x now can show two type of previews (put in /(romsdir)/.previews/).

RG350test now is in the system, not in opk.

- 1.7.9.3:

update again file system, repartition and expander scripts.

Gmenu2x analog stick control is removed

Battery accuracy.

Stock clock app update with a new redesign. thanks to Rafa Vico (https://github.com/RafaVico)

Text editor opk buttons fixers. thanks to Rafa Vico (https://github.com/RafaVico)

- 1.7.9.2 fix:

Fixed the lost  library ncurses 5 from the buildroot code (this is now ncursesw 6.1 in the toolchain github https://github.com/tonyjih/RG350_buildroot/commit/f167487b5a0450cebd99256400ded18734f2f25d and now the olds emulator not work). This is necessary for some old old emulators.

- 1.7.9.2:

Optimized update opk script to ckeck and repair boot partition.

Fix flasher script, not more error segmentation fault, but now the flasher for opk time take about 15min, all is automatized, so you not need do nothing.

Gmenu2x updated, now you can edit the opk icons, name, description and files filtre.

Gmenu2x now can on/off the screen with the power button, not more "ghost wakeups". thanks to Rafa Vico (https://github.com/RafaVico)

RG350 test updated, now you can see the sdcards free space. thanks to Rafa Vico (https://github.com/RafaVico)

Updated Esotoric to the last version. Thanks to Podulator (https://github.com/podulator/esoteric)

- 1.7.9.1:

Optimized the first boot set partition and format file system, this no longer rewrite, only with flasher install.

Optimized the check files in the boots.

Optimized flasher install.

Gmenu2X now has a Docs reader (txt) thanks to Rafa Vico (https://github.com/RafaVico)

Gmenu2x now show the percentage of the battery too.

Also Gmenu2x can now change the cpu frequency of the console between MAX and MIN to save battery (for example with GBC emu)

(https://raw.githubusercontent.com/Ninoh-FOX/RG350-ROGUE-CFW/master/screenshots/cpucontrol1.png)

(https://raw.githubusercontent.com/Ninoh-FOX/RG350-ROGUE-CFW/master/screenshots/cpucontrol2.png)

Optimized kernel control in screen hz (thanks to pcercuei https://boards.dingoonity.org/retro-game-350rg-350/screen-now-going-bad/msg191784/#msg191784)

- 1.7.9:

Change boot logo (again), OpenDingux logo removed for respect to the original creator of the system.

(https://raw.githubusercontent.com/Ninoh-FOX/RG350-ROGUE-CFW/master/logo_rg350.jpg)

All references to OpenDingux removed, except in the system information as thanks for the original base system.

(https://raw.githubusercontent.com/Ninoh-FOX/RG350-ROGUE-CFW/master/system_info.png)

Gmenu2x now read and write all from home.

Esoteric add how optional launcher in the system. (Thanks to Podulator https://github.com/podulator/esoteric).

Update RG350Tests in sd_imagen (thanks to https://github.com/RafaVico).

Now sd_imagen too in opk file, you can now reflash the sdcard without open the console (this erase all).

Now work updates and flashers opks in another launchers.

Fixed dialog error memory from flasher opk, Now the progress is show from terminal.

- 1.7.8.2:

change boot logo.

New name firmware.

Update some libs.

Gmenu2x now is mount in /local/home/.gmenu2x

A dedicate a pcsx4all build opk.

- 1.7.8.1:

boot partition now is mount too in /media/system in rw mode for recovery the system from pc if this is possible.

Gmenu2x now can link .opk and .dge files.

New boot logo.

New flasher sdcard imagen (thanks to https://github.com/gcwnow/imager )

- 1.7.8:

lazy_itable_init = 0 and lazy_journal_init = 0 support added to EXT4 file system.

Display version in System Info app.

exfAT support added - no more need to download a utility to format 64GB+ SD cards

Default SD card mount changed to /media/sdcard - No having to re-do paths when swapping SD cards

Auto swap file and partition resize - This takes a while, allow it to finish. Progress will be shown on screen during first boot

Duplicate modules removed from modules.squashfs

Fix the resize in old stock firmwares (bad ext4 partition)

Fixed power off and reboot error messages

Fixed slowdowns and stuttering during first 15 minutes after first boot )8. Rebuild mininit-syspart from original opendingux code. (Thanks to https://github.com/OpenDingux/mininit)

Autoremove old configs of the system in the first boot.

Change file system table.

Restore USB-HID suport.

update libshake from original code: https://github.com/zear/libShake


Instructions:

NOTE: If is your first install time for this cfw, the optimus is user sd_image.bin, afte, you can use alway the opks files for update. sd_image.bin erase all data in sdcard!! If you gone from another CFW is better that you make a backup of the folders local/home and local/app first.

Instruction for update from OPK update file (Not need open the console):

Place the update opk file in /media/data/apps or /media/sdcard/apps

Run from your prefer launcher.

allow process to complete

Reboot

If system fails to boot, press Y to boot to last working kernel, or X to boot to last working rootfs. X+Y will load your previous OS version.

Instructions for  a clear update / fix internal sdcard
NOTE: This metode erase all microsd, do a copy of all your files before.

Place the flasher opk file in /media/sdcard/apps.

Run from your prefer launcher.
 
Allow process to complete.

Reboot.
Instructions for a change of internal sdcard:

NOTE: This metode erase all microsd, do a copy of all your files before.

Download a base system "sd_image.bin" from releases.

for Windows:

Format the new sdcard / internel sdcard with SD FORMATTER 5.0.1 ( https://www.sdcard.org/downloads/formatter/ ) two times.

Download Win32 disk imager ( https://sourceforge.net/projects/win32diskimager/ ) and flash (writer) the FW base imagen in the sdcard.

NOT RESIZER THE EXT4 PARTITION IN WINDOWS!! only put the internal sd in the console and follow the instructions.

for Linux:

Format the new sdcard / internel sdcard with gnome-disk-utility.

Flash the FW base imagen in the sdcard with gnome-disk-utility. Or type in a terminal:

Code: [Select]
sudo dd if=sd_image.bin of=/dev/[sdcard mount point]
Not resize!! Put the internal sd in the console and follow the instructions.
intructions for recovery or external update:
thanks to https://github.com/gcwnow wiki

This work for GMENUNX.

You can copy the kernel or rootfs to the internal SD card of the RG350 using FTP, SFTP or SCP. I recommend SCP since it is just one line on the command prompt. It does require setting up SSH keypair authentication though.

for kernel

Code: [Select]
scp vmlinuz.bin [email protected]:/media/system/
Code: [Select]
scp modules.squashfs [email protected]:/media/system/update_m.bin
for rootfs

Code: [Select]
scp rootfs.squashfs [email protected]:/media/system/update_r.bin
Reboot the RG350 to activate the new kernel or rootfs. Don't use the reset button: part of the kernel or of the rootfs may not have been flushed from the write cache yet.

You can use:

Code: [Select]
ssh [email protected] RG350:media/data/local/home# reboot

https://www.paypal.me/NinohFOX only for beers
Title: Re: RG350 "ROGUE" CFW
Post by: _-Caleb-_ on December 13, 2019, 07:25:51 pm
Thanks for ur work Ninoh tested without problems

Enviado desde mi Redmi Note 6 Pro mediante Tapatalk

Title: Re: RG350 "ROGUE" CFW
Post by: Ninoh-FOX on December 13, 2019, 07:29:37 pm
Thanks, if you see any problem said me please.  8)
Title: Re: RG350 "ROGUE" CFW
Post by: MadSlug on December 13, 2019, 07:43:04 pm
Thank you for this. Happy Holidays
Title: Re: RG350 "ROGUE" CFW
Post by: iball on December 13, 2019, 09:06:34 pm
I'm going to try this on my 350 with the newly busted screen.
 What are the screen timings with this one?  Same as the "regular" shipping firmare?
Title: Re: RG350 "ROGUE" CFW
Post by: crazyhorse2352 on December 13, 2019, 10:12:52 pm
  In b4 the opendingux devs start moaning  ;) thanks for your hard work.
Title: Re: RG350 "ROGUE" CFW
Post by: iball on December 13, 2019, 10:57:25 pm
Nope, didn't fix my screen.  But I like this firmware.  Nice and clean interface like my GCW-Zero.
If I had a working RG350 I'd probably switch to this.
Title: Re: RG350 "ROGUE" CFW
Post by: Ninoh-FOX on December 14, 2019, 12:13:04 am
If you like, you can write me the problem in you console and I can see the hz screen config.
Title: Re: RG350 "ROGUE" CFW
Post by: iball on December 14, 2019, 12:35:18 am
If you like, you can write me the problem in you console and I can see the hz screen config.
It's all documented here.
https://boards.dingoonity.org/retro-game-350rg-350/screen-now-going-bad/
Title: Re: RG350 "ROGUE" CFW
Post by: Ninoh-FOX on December 14, 2019, 12:41:54 am
It seems more like a failure of the board or the flex cable than of the system (any) itself, but if it only activates at the time I could try to make you a version of the kernel that sends less voltage to the screen to see what happens, although I do not assure you  It can work.
Title: Re: RG350 "ROGUE" CFW
Post by: iball on December 14, 2019, 12:44:59 am
It seems more like a failure of the board or the flex cable than of the system (any) itself, but if it only activates at the time I could try to make you a version of the kernel that sends less voltage to the screen to see what happens, although I do not assure you  It can work.
Worth a shot.  The website I bought it from seems to have abandoned warranty support for it anyway.
When it "went bad" I had just been playing a game, then shut it down properly, had dinner, and an hour later turned it on and it instantly booted up with that bad screen.
Title: Re: RG350 "ROGUE" CFW
Post by: Ninoh-FOX on December 14, 2019, 12:47:47 am
It seems more like a failure of the board or the flex cable than of the system (any) itself, but if it only activates at the time I could try to make you a version of the kernel that sends less voltage to the screen to see what happens, although I do not assure you  It can work.
Worth a shot.  The website I bought it from seems to have abandoned warranty support for it anyway.
When it "went bad" I had just been playing a game, then shut it down properly, had dinner, and an hour later turned it on and it instantly booted up with that bad screen.

Ok, I go try make a personal version kernel for you case tomorrow (in spain is the 1:47 XD)
Title: Re: RG350 "ROGUE" CFW
Post by: iball on December 14, 2019, 12:53:38 am
It seems more like a failure of the board or the flex cable than of the system (any) itself, but if it only activates at the time I could try to make you a version of the kernel that sends less voltage to the screen to see what happens, although I do not assure you  It can work.
Worth a shot.  The website I bought it from seems to have abandoned warranty support for it anyway.
When it "went bad" I had just been playing a game, then shut it down properly, had dinner, and an hour later turned it on and it instantly booted up with that bad screen.
Cool. Thanks!
Ok, I go try make a personal version kernel for you case tomorrow (in spain is the 1:47 XD)
Title: Re: RG350 "ROGUE" CFW
Post by: JordiMirror on December 14, 2019, 07:40:09 am
Thanks Ninoh, everything works perfect.

Enviado desde mi MI 8 mediante Tapatalk

Title: Re: RG350 "ROGUE" CFW
Post by: michaelpegaso on December 14, 2019, 08:00:03 am
Thank you very much, everything is going well, I will closely monitor your progress
Title: Re: RG350 "ROGUE" CFW
Post by: Ninoh-FOX on December 14, 2019, 01:58:17 pm
New update 1.7.9 (see the log changes)

NOW YOU CAN FLASHER WITHOUT OPEN THE CONSOLE!!!
Title: Re: RG350 "ROGUE" CFW
Post by: iball on December 14, 2019, 04:01:02 pm
New update 1.7.9 (see the log changes)

NOW YOU CAN FLASHER WITHOUT OPEN THE CONSOLE!!!
Needs more testing.  The flasher OPK ends with a bus error / segmentation fault.
Then I had to hit the reset button at which point it booted up and started re-sizing the micro-SD card.
But after it finishes re-sizing it seems to work fine.
Title: Re: RG350 "ROGUE" CFW
Post by: Ninoh-FOX on December 14, 2019, 04:16:40 pm
New update 1.7.9 (see the log changes)

NOW YOU CAN FLASHER WITHOUT OPEN THE CONSOLE!!!
Needs more testing.  The flasher OPK ends with a bus error / segmentation fault.
Then I had to hit the reset button at which point it booted up and started re-sizing the micro-SD card.
But after it finishes re-sizing it seems to work fine.

Yes, I know, but the flasher is completed, the "error" is aleatory., only affect to dialog command. Maybe I erase this line command in the next update and put autoreboot.

https://en.wikipedia.org/wiki/Segmentation_fault
Title: Re: RG350 "ROGUE" CFW
Post by: iball on December 14, 2019, 04:28:55 pm
New update 1.7.9 (see the log changes)

NOW YOU CAN FLASHER WITHOUT OPEN THE CONSOLE!!!
Needs more testing.  The flasher OPK ends with a bus error / segmentation fault.
Then I had to hit the reset button at which point it booted up and started re-sizing the micro-SD card.
But after it finishes re-sizing it seems to work fine.

Yes, I know, but the flasher is completed, the "error" is aleatory., only affect to dialog command. Maybe I erase this line command in the next update and put autoreboot.

https://en.wikipedia.org/wiki/Segmentation_fault
Yeah, having it auto-reboot after it's done would help prevent panic-attacks from users installing it.
Also, I cleaned up a bit of the English in the README and submitted a change request in Github.
Title: Re: RG350 "ROGUE" CFW
Post by: Ninoh-FOX on December 14, 2019, 06:20:42 pm
fixed, now the progress is show from terminal.

I am updated the new flasher opk.

You can download in the 1.7.9 link.

Thanks for the english revision!!
Title: Re: RG350 "ROGUE" CFW
Post by: elea on December 14, 2019, 08:30:33 pm
New update 1.7.9 (see the log changes)

NOW YOU CAN FLASHER WITHOUT OPEN THE CONSOLE!!!
Needs more testing.  The flasher OPK ends with a bus error / segmentation fault.
Then I had to hit the reset button at which point it booted up and started re-sizing the micro-SD card.
But after it finishes re-sizing it seems to work fine.

Does "seems to work fine" also mean that your screen now works?
Title: Re: RG350 "ROGUE" CFW
Post by: iball on December 14, 2019, 09:26:59 pm
New update 1.7.9 (see the log changes)

NOW YOU CAN FLASHER WITHOUT OPEN THE CONSOLE!!!
Needs more testing.  The flasher OPK ends with a bus error / segmentation fault.
Then I had to hit the reset button at which point it booted up and started re-sizing the micro-SD card.
But after it finishes re-sizing it seems to work fine.

Does "seems to work fine" also mean that your screen now works?

Nope.  Screen still borked.  But that's not this firmware's fault.
Title: Re: RG350 "ROGUE" CFW
Post by: Eliwood_san on December 15, 2019, 02:19:26 am
LOL for archiving purposes dont try to this in your GCW zero the firmware of Nino-Oh,even boot fine the logo.....but in the final approach to get the settings right it get very screwed.Im not mad to get bricked my zero.

In fact they have the power slider button lost so in that state even if i sell it....its not good,so instead i put this opk and see what results are with this frankestein

This the image from the boot logo:

(https://i.imgur.com/ibetpYg.jpg)
Title: Re: RG350 "ROGUE" CFW
Post by: HercTNT on December 15, 2019, 05:31:02 am
LOL for archiving purposes dont try to this in your GCW zero the firmware of Nino-Oh,even boot fine the logo.....but in the final approach to get the settings right it get very screwed.Im not mad to get bricked my zero.

In fact they have the power slider button lost so in that state even if i sell it....its not good,so instead i put this opk and see what results are with this frankestein

This the image from the boot logo:

(https://i.imgur.com/ibetpYg.jpg)

why would you do this. the firmware is not meant for the gcwzero. were you just curious?
Title: Re: RG350 "ROGUE" CFW
Post by: Eliwood_san on December 15, 2019, 05:54:26 am
LOL for archiving purposes dont try to this in your GCW zero the firmware of Nino-Oh,even boot fine the logo.....but in the final approach to get the settings right it get very screwed.Im not mad to get bricked my zero.

In fact they have the power slider button lost so in that state even if i sell it....its not good,so instead i put this opk and see what results are with this frankestein

This the image from the boot logo:

(https://i.imgur.com/ibetpYg.jpg)

why would you do this. the firmware is not meant for the gcwzero. were you just curious?

I know their firmware its not suited for the GCW Zero....yep only tested the opk to see if this R350 firmware can install it.In fact to see running the custom logo running its what i ge so far and i get bricked.

I have a psp,new2dsxl and android gamepad with a phone... .

Im not worry about my unit it.I decide to sacrifice to the devs xD,

Its dificult to obtain a button slider powe replacement  for the GCW Zero and its more difficult to sell it in that poor state here where i live.
Title: Re: RG350 "ROGUE" CFW
Post by: Ninoh-FOX on December 15, 2019, 06:56:19 am
Aaaa.... This kernel and ubiboot not is does for GCW0...
Title: Re: RG350 "ROGUE" CFW
Post by: adventureFAN on December 15, 2019, 08:35:59 am
Why removing OpenDingux logo?
IMO it is respectful to leave to logo because your firmware is based on OpenDingux.
Title: Re: RG350 "ROGUE" CFW
Post by: elea on December 15, 2019, 09:49:53 am
Why removing OpenDingux logo?
IMO it is respectful to leave to logo because your firmware is based on OpenDingux.

Because the original OpenDingux devs don't want the OpenDingux name on such projects?
Title: Re: RG350 "ROGUE" CFW
Post by: adventureFAN on December 15, 2019, 09:59:27 am
Is this a fact? oO"
Title: Re: RG350 "ROGUE" CFW
Post by: pcercuei on December 15, 2019, 10:20:20 am
Your GCW Zero is not bricked, you can recover it with the OD rescue CD.

About the OpenDingux logo, Ninoh-FOX asked me about it, and I said that I prefer that the logo doesn't appear on the boot screen, since it's a derived product (you wouldn't put Debian's logo on Ubuntu) and to make it clear that the two projects are separate. But mentioning the affiliation in e.g. the system info app is fine.
Title: Re: RG350 "ROGUE" CFW
Post by: adventureFAN on December 15, 2019, 11:00:40 am
Hmm... okey.
When I'm the dev of something and someone makes something based on my stuff I would honored when there is a "based on >my stuff<" x]

But okey ^^
Title: Re: RG350 "ROGUE" CFW
Post by: elea on December 15, 2019, 11:15:38 am
@Eliwood_san Time to unbrick! https://boards.dingoonity.org/gcw-releases/opendingux-rescue-disc-v0-1/
Title: Re: RG350 "ROGUE" CFW
Post by: Ninoh-FOX on December 15, 2019, 01:41:49 pm
Yes, opendingux reference only can be see in system info:

(https://raw.githubusercontent.com/Ninoh-FOX/RG350-ROGUE-CFW/master/system_info.png)
Title: Re: RG350 "ROGUE" CFW
Post by: Eliwood_san on December 15, 2019, 08:57:13 pm
@Eliwood_san Time to unbrick! https://boards.dingoonity.org/gcw-releases/opendingux-rescue-disc-v0-1/

Thank you but i have a little problem....how to flash the OpenDingux Rescue CD in Zorin OS? its a distro ubuntu.....all the tools i have for the GCW Zero to flash to the usb are for windows.

The other advice Ninoh-Fox give me in the forum elotrolado,the gcw zero have alternative "recovery" its to press x+y and put the original GCW Zero Update in my microsd....the only miss information to know its to put that update in the folder apps or put in the root of the microsd..so i dont know which how to put them.I need some help here.

Sorry for my lack of advanced english language,its not my native language

Dont worry about my unit Ninoh-fox,the GW Zero its a unsupported community device and my unit have a defective hardware...selling its not a option,so i was doing some experiments xDDD jajaja
Title: Re: RG350 "ROGUE" CFW
Post by: spyroskonst on December 15, 2019, 08:57:30 pm
OMG did i saw right?
I can not wait for the hibernate option on future update!!!
Title: Re: RG350 "ROGUE" CFW
Post by: pcercuei on December 15, 2019, 09:41:43 pm
Thank you but i have a little problem....how to flash the OpenDingux Rescue CD in Zorin OS? its a distro ubuntu.....all the tools i have for the GCW Zero to flash to a usb are for windows.
There are a couple of software you can use, for instance Etcher (https://www.omgubuntu.co.uk/2017/05/how-to-install-etcher-on-ubuntu).
Title: Re: RG350 "ROGUE" CFW
Post by: Ninoh-FOX on December 15, 2019, 10:48:25 pm
OMG did i saw right?
I can not wait for the hibernate option on future update!!!

This is what I've been giving rounds all weekend, the problem of suspension is basically that rootfs is mounted in read only, I have two options, and the two difficult for me, first, get to update the kernel to a version that allows mounting  rootfs in write mode, I got the kernel 4.1, but the button mapping was not correct, the brightness is always 100% and more things that would fail, I tried to put the changes of 3.12, but with that the screen did not turn on and entered  bootloop, another option that also escapes my hands is to configure minis-part to mount rootfs in boot / root and copy it to an empty ext4 partition ... I'm trying to see if I can assign the commands "blank" and "unblack  "to some button, which would be the closest thing in the short term.

Another thing I looked at was to adjust the jz4770_fb as Pcercuei said, although my unit is doing well, it seems not to solve the problem of defective screens.
Title: Re: RG350 &quot;ROGUE&quot; CFW
Post by: 02k0 on December 15, 2019, 10:54:14 pm
Best wishes!

Any support for GKD350h I future?

https://youtu.be/L0YylVMgGDg

Enviado de meu moto g(7) play usando o Tapatalk

Title: Re: RG350 "ROGUE" CFW
Post by: ace9094 on December 16, 2019, 12:02:26 am
Hi nice CFW... Thanks

Question: I have put Beats of Rage back on but I cannot the folder to add the PAK files... On the old CFW it was in the Home folder.

I have rebooted and launched the app... Any idea>?


Nevermind, shutdown and disconnected the USB then next reboot the folder was there :)

Thanks
ace
Title: Re: RG350 "ROGUE" CFW
Post by: Eliwood_san on December 16, 2019, 01:34:00 am
Thank you but i have a little problem....how to flash the OpenDingux Rescue CD in Zorin OS? its a distro ubuntu.....all the tools i have for the GCW Zero to flash to a usb are for windows.
There are a couple of software you can use, for instance Etcher (https://www.omgubuntu.co.uk/2017/05/how-to-install-etcher-on-ubuntu).

Lol Thanks to you, i revive my poor unit xDDD

About the defective hardware look the last picture i lost my button power so its difficult to obtain here a replacement part.

Anyway i will wait to someone get a proper opk update  "350 Rogue Zero edition firmware" xDDD


(https://i.imgur.com/gMKE9Ek.jpg)
(https://i.imgur.com/B7RrCb4.jpg)
(https://i.imgur.com/bYVptpH.jpg)


Title: Re: RG350 "ROGUE" CFW
Post by: goodfodder on December 17, 2019, 09:08:42 am
Hi, does this fw include overclocking functionality? Something sorely missing from the stock fw given the release of the gdk350h
Title: Re: RG350 "ROGUE" CFW
Post by: michaelpegaso on December 17, 2019, 09:33:48 am
Hi, does this fw include overclocking functionality? Something sorely missing from the stock fw given the release of the gdk350h

If you have a small overclock and it goes very well for some games
Title: Re: RG350 &quot;ROGUE&quot; CFW
Post by: _-Caleb-_ on December 17, 2019, 02:31:27 pm
Hi, does this fw include overclocking functionality? Something sorely missing from the stock fw given the release of the gdk350h
Yep, just 100mhz and works fine

Enviado desde mi Redmi Note 6 Pro mediante Tapatalk

Title: Re: RG350 "ROGUE" CFW
Post by: goodfodder on December 17, 2019, 03:29:58 pm
Cool, is this user selectable or hard coded?
Thanks
Title: Re: RG350 "ROGUE" CFW
Post by: evilryu_sp on December 17, 2019, 03:40:12 pm
Hi all,

Apologies if this has been already asked before... How many "firmware" versions do we have for the RG350 at the moment and what are the differences between them?

As far as I understand so far we have:

Versions based on an existing GCW dingux release (from around 2014?)
- Tonyjih's releases
- Jutleys' releases
- Ninoh-FOX's Rogue RG350

Upcoming official up-to-date Dingux release by pcercuei (Q1-Q2 2020)?


Focusing on the already released versions, can we say:
- Tonyjih's is taken as the base, "clean" software release?
- Jutleys' releases take the clean software and bundles in emulators and other bits and bobs? Or is this also adding new functionality not present in the other releases?
- Ninoh-Fox's Rogue CFW flavour is a fork of tonyjih's clean release that is trying to add new functionality? Or is this building on top of Jutley's 1.7 version?

Thanks in advance!
Title: Re: RG350 "ROGUE" CFW
Post by: SeongGino on December 17, 2019, 04:32:32 pm
snip

Hi!

Paul's Kernel is upstream, which is what all other versions are based off of.
Tony Jih's is the first modified image made specifically for the RG350, as a stopgap until Paul's software is updated as he pleases.
Jutley's is Tony's with homebrew already built in.
Ninoh's (this) is a fork off Tony Jih's source that adds. . . um, instability and a new name, as far as I can see.
Title: Re: RG350 "ROGUE" CFW
Post by: Ninoh-FOX on December 18, 2019, 01:24:10 am
snip

Hi!

Paul's Kernel is upstream, which is what all other versions are based off of.
Tony Jih's is the first modified image made specifically for the RG350, as a stopgap until Paul's software is updated as he pleases.
Jutley's is Tony's with homebrew already built in.
Ninoh's (this) is a fork off Tony Jih's source that adds. . . um, instability and a new name, as far as I can see.

where you see instability? Please, said me the bug for fix.
Title: Re: RG350 "ROGUE" CFW
Post by: _-Caleb-_ on December 19, 2019, 01:20:25 am
snip

Hi!

Paul's Kernel is upstream, which is what all other versions are based off of.
Tony Jih's is the first modified image made specifically for the RG350, as a stopgap until Paul's software is updated as he pleases.
Jutley's is Tony's with homebrew already built in.
Ninoh's (this) is a fork off Tony Jih's source that adds. . . um, instability and a new name, as far as I can see.
Hi SeongGino,
. This version is tested by at least 60 People in different consoles with different board versions  before release and several People are working in a better system (a exsmple is the input test made for the rg350 by rafavico) and yes, its based in the code of Tony yeah, but Ubuntu is based in deb?an and not for that reason are unstable, bad or better, is simply other distro.

In the New versions the guys are working Hard in lot of things. Include several updates in gmenu2x code and usability...im working in a backup program for the savestates and other things (not released yet) and working also in a better spanish translation for gmenu2x and gmenunx. (thats for january)

The jutleys version as you said are just the Tony code with Emulators and skins... Then, if i need to choice develop something for the console i choice release with and for the distro im using. and I said distro in the original use of the Word. The jutleys versi?n is just a Pack of things, just that, nothing better, nobody of the "team" are working in the development etc hehehe, and the goal, i think, is sell consoles in his online shop hehhe. (personal opinion)

If you found some bug or some kind of issue just report in the github or the discord for patch as the rest of us doing please

Regards!!!(https://uploads.tapatalk-cdn.com/20191219/6a08e43f62e294eda14021baebcdee4f.jpg)

Enviado desde mi Redmi Note 6 Pro mediante Tapatalk
Title: Re: RG350 "ROGUE" CFW
Post by: RxBrad on December 19, 2019, 03:36:20 am
As an English-speaking person not in Spain, I'm curious who the 60 testers are? Is it 60 people who have installed and specifically reported back their results? Is there a Discord/IRC/something-else channel somewhere that 60 people have logged into at some point?

I only ask because 1) I worry about a mandatory 10% overclock and how it might affect some units but not others, and 2) I'm curious if people with known LCD problems have had success with different timings
Title: Re: RG350 "ROGUE" CFW
Post by: Recce on December 19, 2019, 06:00:06 am
I don't understand the hostility, i.e. asking how many people is really testing the code and even requesting to see all those testers' contributions online.

If interested, download the firmware and try it out to see if it's stable enough for you. You can always report any problem and flash back to whatever stable firmware version you're using.

If not interested, then just move on and not view this thread?

As far as I can tell from the posts, the 100MHz overclocking is just a request from a user and the LCD line problem which is totally unrelated to this firmware did not have a solution in this firmware or any other firmwares for that matter.
Title: Re: RG350 "ROGUE" CFW
Post by: michaelpegaso on December 19, 2019, 11:04:35 am
Hi, does this fw include overclocking functionality? Something sorely missing from the stock fw given the release of the gdk350h

It has a small overclock of approximately 10% and is doing well.
Title: Re: RG350 "ROGUE" CFW
Post by: RxBrad on December 19, 2019, 01:57:07 pm

If interested, download the firmware and try it out to see if it's stable enough for you. You can always report any problem and flash back to whatever stable firmware version you're using.


My concern is that this is being touted as totally-tested by lots & lots of people & super-stable.  Then people go into other forums asking for support on things that this FW could possibly break.  If it borks your install, repeatedly opening the unit to reflash the internal SD card risks damaging the plastic threads on the RG-350 or the screws holding it all together.

As far as I can tell from the posts, the 100MHz overclocking is just a request from a user

It's a request that appears to have been (re)implemented. (https://github.com/Ninoh-FOX/RG350-ROGUE-CFW/commit/da3f0e81fa129bdcb456a4772ab619112f754401#diff-9ddf81f9b9c0abb21a519bc37b16fefc)

the LCD line problem which is totally unrelated to this firmware did not have a solution in this firmware or any other firmwares for that matter.

The LCD problem exists in all firmwares to this point, even the "official" ones that they ship with.  I noticed that there was a commit (https://github.com/Ninoh-FOX/RG350-ROGUE-CFW/commit/da3f0e81fa129bdcb456a4772ab619112f754401) taking into account some issues raised by @pcercuei about timing frequencies.  I'm just genuinely curious if those changes fixed it for anyone.  If so, then this is a good thing.
Title: Re: RG350 "ROGUE" CFW
Post by: goodfodder on December 19, 2019, 02:20:00 pm
Hi, does this fw include overclocking functionality? Something sorely missing from the stock fw given the release of the gdk350h

Installed, works great, noticeable performance improvement in titles where the cpu is a bottleneck (e.g. Afterburner).
Only issue I have had is that most of my psx save states no longer work and had initial problems changing the psx emulator config (fresh image build) - addressed by copying the config from the original stock sd. Overall a keeper
Title: Re: RG350 "ROGUE" CFW
Post by: HercTNT on December 19, 2019, 05:11:20 pm
As an English-speaking person not in Spain, I'm curious who the 60 testers are? Is it 60 people who have installed and specifically reported back their results? Is there a Discord/IRC/something-else channel somewhere that 60 people have logged into at some point?

I only ask because 1) I worry about a mandatory 10% overclock and how it might affect some units but not others, and 2) I'm curious if people with known LCD problems have had success with different timings

there is no dedicated support network for these devices. once you open the device and install custom firmware as it is you have violated the manufacturers warranty. also, they are not all the same. some tolerate overclocks much better than others and you can't way your options based on someone elses results. you simply need to do what the rest of us do. take a chance and go slow. i have opened my devices many times, its just how it works.
Title: Re: RG350 "ROGUE" CFW
Post by: ace9094 on December 19, 2019, 07:21:05 pm
My concern is that this is being touted as totally-tested by lots & lots of people & super-stable.  Then people go into other forums asking for support on things that this FW could possibly break.  If it borks your install, repeatedly opening the unit to reflash the internal SD card risks damaging the plastic threads on the RG-350 or the screws holding it all together.

See this thread on changing the SD Card - It has steps to opening carefully: https://boards.dingoonity.org/retro-game-350rg-350/internal-sd-card-upgrade-tips/ (https://boards.dingoonity.org/retro-game-350rg-350/internal-sd-card-upgrade-tips/)

Title: Re: RG350 "ROGUE" CFW
Post by: Ninoh-FOX on December 20, 2019, 12:16:37 am
new release. please, see the first post.
Title: Re: RG350 "ROGUE" CFW
Post by: SeongGino on December 20, 2019, 01:23:04 am
This version is tested by at least 60 People in different consoles with different board versions  before release
Not exactly sure what number of testers has to do with anything. There are released games with roughly double the amount of coordinated testers and quality assurance members (https://www.mobygames.com/game/windows/fallout-76/credits) whose results have led to. . . unfortunate outcomes. (https://www.metacritic.com/game/pc/fallout-76)

Quote
yes, its based in the code of Tony yeah, but Ubuntu is based in deb?an and not for that reason are unstable, bad or better, is simply other distro.
I've never once brought up comparisons to Ubuntu or Debian, but you also can't compare a more reasonably flexible platform like conventional PCs to a handheld with known shortcomings and admittedly fragile components, like an internal storage medium that is prone to lifetime damage with subsequent repeated overwrite cycles, like the microSD card.

Quote
In the New versions the guys are working Hard in lot of things. Include several updates in gmenu2x code and usability...
Ah yes, because what we really need is more fragmentation causing consumers and even the most educated users endless anguish over the fact that updates aren't being sent upstream for everyone to enjoy. Didn't we already have enough discussion on why forks using the Dingux name were a bad idea because it would've been better for everyone involved to contribute upstream and reduce redundant workloads on reimplementing these features for more than one version of the software?

Quote
im working in a backup program for the savestates and other things (not released yet) and working also in a better spanish translation for gmenu2x and gmenunx. (thats for january)
Cool! Then... why not contribute that upstream, maybe? I'm sure Paul or Podulator, and the users using our current stable base firmwares would appreciate said updates without flashing SD cards and potentially losing our precious data.

Quote
The jutleys version as you said are just the Tony code with Emulators and skins...
Yes, what Jutley's packages is nothing more than that; a repackage. And I don't personally respect what he's done giving firmwares arbitrary naming conventions just to make them somehow flashy to the average user. It causes a lot of confusion for us who have to troubleshoot or otherwise guide new unsuspecting users on what or what not to install or use.
But at least what's being sold back to us is an already proven stable platform without risks of devices not booting or crashing due to forced overclocks [Ninoh's 1.7], forced fifteen minute wait periods after upgrading just to init the filesystem [Old 1.6-1.7 branch], or having to put stress on internal MicroSD cards in the first place due to excessive rewrites [I.E. any flashable upgrade].

Quote
If you found some bug or some kind of issue just report in the github or the discord for patch as the rest of us doing please
For the record, this (and much of what I've already pointed to earlier in the post) is sort of part of a greater point: you DO realize that you are peddling unofficial, and certainly unsupported firms on unsuspecting users who don't know any better, maybe sees this marketed as new and shiny by YouTube marketers who also don't know any better, or simply can't tell the difference between 'new' and 'stable', and now you have a usergroup of people who are not aware that what they're running could very possibly break their devices if they don't use it correctly? Not even a warning, like "Hey, just to let ya guys know, I'm just putting stuff out there and can't confirm how stable this may or may not be?" Because with how fast the developer is known to (for lack of a better phrase) shotgun-scatter their releases, even multiple revisions in a day, without warning... I don't feel comfortable using people who don't know any better as guinea pigs to find out the worst for themselves. And if they have issue, then us on 'normal' firmwares won't know how to help them.

For the record, the same goes for the whole screen fragility thing, but that's a different subject.

But I think my biggest point of all is, and I've been hinting towards this for a bit now: why not just contribute this back upstream if you think this is so great? The entire point of the original '1.7' branch, so I thought, was to have some kind of standard that could be used (at least until Paul's OpenDingux upstream finally released) so users wouldn't have to choose between two completely different branches of software for the RG-350. What you guys don't see (or heck if I know, probably already have seen if your supposed test bench is as big and populated as you say it is) are the tons of people who come around asking what to use on their shiny new RG-350's; and lots of them, not knowing any better, picked 1.7, not realizing that the newest release of the firmware isn't necessarily 'the best' release and has known problems. A lot of people get so confused, they can often give up and sell their consoles off outright because they didn't want to deal with different competing firmwares seemingly existing in competition with one another, and don't know what one offers over the other. Sure, you could say 'then they should just use what they have and not worry' but, to say that is kind of dismissing the point of an entire competing firmware branch altogether; if the average Jane isn't gonna want to use it, why bother? Honestly, much of the effort could've gone to just contributing to the base OpenDingux project instead, so that way everyone will get to experience the clear next-evolution of these devices - and work with a team who has somewhat of a proven track record. Because eventually, I can see in the near future that newer, more official-er releases (either from Paul or the device engineer themselves) are coming which will bring newer base kernels and much-needed updates that allow devs to utilize the device better, and will ultimately cause most of the (admittedly good) work here to go unused. Which is a tragedy.

/rant
Title: Re: RG350 "ROGUE" CFW
Post by: iball on December 20, 2019, 01:37:30 am
MASSIVE WALL OF RANT TEXT

I don't care about your firmware rage. 
Chinesium handhelds like these are *always* going to be a gamble with firmware, software, and hardware.
The screen on my RG350 has already gone bad, and another user's RG350 has met the same fate this week.
You want solid firmware? 
Well, I want solid hardware that survives at least a few years (like the GCW-Zero) and not a month (like the RG350).
Title: Re: RG350 "ROGUE" CFW
Post by: SeongGino on December 20, 2019, 01:41:59 am
tiny wall of rage text
M'kay, sure. It's truly unfortunate you've had to undergo such a horrific experience, but then there's the greater majority of us who has solid hardware, and just wants one solid firmware to make it complete; not two.

Have you seen the Nintendo Switch scene and Atmosphere vs. SX OS? It feels like undergoing Vietnam flashbacks... having to trudge through debate after debate of X vs. Y, and new users being hopelessly confuzzled.

That's exactly what Vietnam was like. Let's not make Vietnam 2.
Title: Re: RG350 "ROGUE" CFW
Post by: iball on December 20, 2019, 02:04:15 am
tiny wall of rage text
M'kay, sure. It's truly unfortunate you've had to undergo such a horrific experience, but then there's the greater majority of us who has solid hardware, and just wants one solid firmware to make it complete; not two.

Have you seen the Nintendo Switch scene and Atmosphere vs. SX OS? It feels like undergoing Vietnam flashbacks... having to trudge through debate after debate of X vs. Y, and new users being hopelessly confuzzled.

That's exactly what Vietnam was like. Let's not make Vietnam 2.
I doubt you know what Vietnam was like, however I know from firsthand experience what Bosnia, Kosovo, Iraq, and Afghanistan were like.
This doesn't compare in any way to any war or combat zone since the dawn of civilization.
It's not giving me any "flashbacks" and I've probably damn well seen and participated in more real-world war over a two decade time period compared to anyone else on this forum.
You picked the absolute wrong analogy to debate me with, son.  I'm old.  I've seen things you wouldn't believe.
If you don't like how things are going, then go do your own thing instead and stop trying to berate others into doing what you want.
Guess what *always* leads to war?  Berating others and trying to force them to do things they don't want to do.
Title: Re: RG350 "ROGUE" CFW
Post by: _-Caleb-_ on December 20, 2019, 02:20:07 am
Without quotes, thats not a competition, is a choice, thats is gpl and gnu mean, if u doesnt understand this point, this handheld isnt for u..

If this cfw is not a problem for the opendingux creator, open dingux was not a problem for booboo, the dingux creator... Why is a problem for u? Seems like only are looking for a Flame... Same as rxbrad and others...

About my apps will be released when they are finished.

About Vietnam, lol really?

Regards!

Enviado desde mi Redmi Note 6 Pro mediante Tapatalk
Title: Re: RG350 "ROGUE" CFW
Post by: Ninoh-FOX on December 20, 2019, 06:27:04 am
tiny wall of rage text
M'kay, sure. It's truly unfortunate you've had to undergo such a horrific experience, but then there's the greater majority of us who has solid hardware, and just wants one solid firmware to make it complete; not two.

Have you seen the Nintendo Switch scene and Atmosphere vs. SX OS? It feels like undergoing Vietnam flashbacks... having to trudge through debate after debate of X vs. Y, and new users being hopelessly confuzzled.

That's exactly what Vietnam was like. Let's not make Vietnam 2.
I doubt you know what Vietnam was like, however I know from firsthand experience what Bosnia, Kosovo, Iraq, and Afghanistan were like.
This doesn't compare in any way to any war or combat zone since the dawn of civilization.
It's not giving me any "flashbacks" and I've probably damn well seen and participated in more real-world war over a two decade time period compared to anyone else on this forum.
You picked the absolute wrong analogy to debate me with, son.  I'm old.  I've seen things you wouldn't believe.
If you don't like how things are going, then go do your own thing instead and stop trying to berate others into doing what you want.
Guess what *always* leads to war?  Berating others and trying to force them to do things they don't want to do.

oh!  I didn't know I had a gun partner here, regards comrade!  8)
(https://fotos.subefotos.com/fab4684e240c0cc5395597b149669b63o.jpg)
Title: Re: RG350 "ROGUE" CFW
Post by: HercTNT on December 20, 2019, 09:11:19 am
MASSIVE WALL OF RANT TEXT

I don't care about your firmware rage. 
Chinesium handhelds like these are *always* going to be a gamble with firmware, software, and hardware.
The screen on my RG350 has already gone bad, and another user's RG350 has met the same fate this week.
You want solid firmware? 
Well, I want solid hardware that survives at least a few years (like the GCW-Zero) and not a month (like the RG350).

It truly sucks that your device went bad, i don't blame you for being irritated. However your expirience is not the same for everyone. I have had many such devices (my dingoo a320 still works fine as well as all three of my rs97's and my rg350) without the issues you have had. It's not like the GCW0's have not had their issues either. Many have broke over the years for others users.  lets not disparage the firmware based on your results.
Title: Re: RG350 "ROGUE" CFW
Post by: goodfodder on December 20, 2019, 09:52:12 am
My opinion; the software is open source; which by definition is use at your own risk.
It is also generally accepted opening up hw is likely to invalidate ones warranty for what it is worth. For me this is a non issue as sending it back to China would cost me nearly as much as a new device.

As to customer confusion this I appreciate as the device devs have not made it clear / easy for consumers to source official software releases, hence one ends up googling sites like this. The devs use of discord for coms is not very professional to be honest

Ninoh - please keep up the good work, appreciate having an alternative build. To me as a consumer it is clear this is not an official release and consumed at my own risk however suggest maybe a disclaimer in your original post to prevent future rants?

For me the OC is where this fw really shines over the stock build, indeed it would be nice to see some higher oc?s if possible?
Title: Re: RG350 "ROGUE" CFW
Post by: Xaijiqq on December 20, 2019, 12:48:16 pm
The devs use of discord for coms is not very professional to be honest

seriously whats with the discord exclusivity surrounding the device?  everything is discord this and discord that
Title: Re: RG350 "ROGUE" CFW
Post by: npaladin2000 on December 20, 2019, 01:52:44 pm
The devs use of discord for coms is not very professional to be honest

seriously whats with the discord exclusivity surrounding the device?  everything is discord this and discord that

There was a Github, complete with registered issues and such. But not enough people used it.
Title: Re: RG350 "ROGUE" CFW
Post by: Hellboy82BR on December 20, 2019, 03:03:32 pm
Hi, first of all, thanks for all support and amazing work here!
I'm using the Rogue CFW and some issues and questions appears:

I tried to edit things like the: "Selector filter","Title" and "Icon" by pressing select button and choosing "Edit (Emulatorname)"
It look like works (aparently) but, when you start an emulator and back to Gmenu2x, it bring back the default settings.

Am I doing something wrong? 😅

Edit: I am using the version 1.7.9.1

Title: Re: RG350 "ROGUE" CFW
Post by: RxBrad on December 20, 2019, 03:48:24 pm
I know I'm the bad-guy here now, but I genuinely want to know if this latest FW with the updated timings has been tested on a unit with a known malfunctioning LCD.  It might actually fix what they previously thought was broken.

And this latest overclock implementation looks a lot better than the previous locked-in 1100 or 1080Mhz firmwares.

EDIT: I see @Nicofilms post here (https://boards.dingoonity.org/retro-game-350rg-350/screen-now-going-bad/msg191962/#msg191962), but based on the timestamps, it looks like he may have updated to the version before this one with with updated LCD timings (?)
Title: Re: RG350 "ROGUE" CFW
Post by: rafavico on December 20, 2019, 05:01:45 pm
@Hellboy82BR you are right. I have to check if name or icon in gmenu2x are attached to opk, because frequency is correctly saved.
Title: Re: RG350 "ROGUE" CFW
Post by: HercTNT on December 20, 2019, 05:57:46 pm
I know I'm the bad-guy here now, but I genuinely want to know if this latest FW with the updated timings has been tested on a unit with a known malfunctioning LCD.  It might actually fix what they previously thought was broken.

And this latest overclock implementation looks a lot better than the previous locked-in 1100 or 1080Mhz firmwares.

EDIT: I see @Nicofilms post here (https://boards.dingoonity.org/retro-game-350rg-350/screen-now-going-bad/msg191962/#msg191962), but based on the timestamps, it looks like he may have updated to the version before this one with with updated LCD timings (?)

its possible some people misunderstood your line of questioning. I don't consider you a bad guy and apologize if i came across wrong. I simply wanted to convey that these devices come with a degree of risk once you modfy them from stock.
Title: Re: RG350 "ROGUE" CFW
Post by: Hellboy82BR on December 20, 2019, 09:23:39 pm
@Hellboy82BR you are right. I have to check if name or icon in gmenu2x are attached to opk, because frequency is correctly saved.

@rafavico Oh I got it! Thanks so much!🙏 
Title: Re: RG350 "ROGUE" CFW
Post by: iball on December 20, 2019, 09:42:37 pm
I know I'm the bad-guy here now, but I genuinely want to know if this latest FW with the updated timings has been tested on a unit with a known malfunctioning LCD.  It might actually fix what they previously thought was broken.

And this latest overclock implementation looks a lot better than the previous locked-in 1100 or 1080Mhz firmwares.

EDIT: I see @Nicofilms post here (https://boards.dingoonity.org/retro-game-350rg-350/screen-now-going-bad/msg191962/#msg191962), but based on the timestamps, it looks like he may have updated to the version before this one with with updated LCD timings (?)

Nope.  Didn't fix the bad screen on mine.
Title: Re: RG350 "ROGUE" CFW
Post by: Ninoh-FOX on December 21, 2019, 09:19:09 am
Hi, first of all, thanks for all support and amazing work here!
I'm using the Rogue CFW and some issues and questions appears:

I tried to edit things like the: "Selector filter","Title" and "Icon" by pressing select button and choosing "Edit (Emulatorname)"
It look like works (aparently) but, when you start an emulator and back to Gmenu2x, it bring back the default settings.

Am I doing something wrong? 😅

Edit: I am using the version 1.7.9.1



No, all is ok, the problem is that gmenu2x read the metadata of opk when gmenu is reloaded and overwrite the config, I need fix this.
Title: Re: RG350 "ROGUE" CFW
Post by: Ninoh-FOX on December 23, 2019, 01:33:42 pm
update 1.7.9.2

Optimized update opk script for that ckeck and repair boot partition.

Fix flasher script, not more error segmentation fault, but now the flasher for opk time take about 15min, all is automatized, so you not need do nothing.

Gmenu2x updated, now you can edit the opk icons, name, description and files filtre.

Gmenu2x now can on/off the screen with the power button, not more "ghost wakeups". thanks to Rafa Vico (https://github.com/RafaVico)

RG350 test updated, now you can see the sdcards free space. thanks to Rafa Vico (https://github.com/RafaVico)

Updated Esotoric to the last version. Thanks to Podulator (https://github.com/podulator/esoteric)
Title: Re: RG350 "ROGUE" CFW
Post by: Hellboy82BR on December 23, 2019, 05:00:14 pm
update 1.7.9.2

Optimized update opk script for that ckeck and repair boot partition.

Fix frasher script, not more error segmentation fault, but now the flasher for opk time take about 15min, all is automatized, so you not need do nothing.

Gmenu2x updated, now you can edit the opk icons, name, description and files filtre.

Gmenu2x now can on/off the screen with the power button, not more "ghost wakeups". thanks to Rafa Vico (https://github.com/RafaVico)

RG350 test updated, now you can see the sdcards free space. thanks to Rafa Vico (https://github.com/RafaVico)

Updated Esotoric to the last version. Thanks to Podulator (https://github.com/podulator/esoteric)


@Ninoh-FOX  Nice improvements  ;D I gonna try it!  Thanks!
Title: Re: RG350 &quot;ROGUE&quot; CFW
Post by: Stouffa on December 23, 2019, 08:28:00 pm
Is anybody having problems running software under this new firmware? I can't get the Atari 800 emulator to start anymore, and it was working well until quite recently (I can't remember exactly which firmware revision it was working with last, but the Atari emulator is from these forums, so it must be after I upgraded to the rogue firmware)

Sent from my F8331 using Tapatalk

Title: Re: RG350 "ROGUE" CFW
Post by: wallacefung on December 24, 2019, 05:17:34 am
Just flashed my RG350 with Rogue 1.7.9.2. I have connected my Handheld to PC with USB-C port2.
When I am playing FBA and unplug the USB-C cable, it will restart OS immediately.
Title: Re: RG350 "ROGUE" CFW
Post by: Ninoh-FOX on December 24, 2019, 07:29:59 am
Just flashed my RG350 with Rogue 1.7.9.2. I have connected my Handheld to PC with USB-C port2.
When I am playing FBA and unplug the USB-C cable, it will restart OS immediately.

that happens since version 1.0 of the system

Is anybody having problems running software under this new firmware? I can't get the Atari 800 emulator to start anymore, and it was working well until quite recently (I can't remember exactly which firmware revision it was working with last, but the Atari emulator is from these forums, so it must be after I upgraded to the rogue firmware)

Sent from my F8331 using Tapatalk



Atari 800 work for me

(https://fotos.subefotos.com/322de42c747fb2bfe930c2e08e3ac741o.jpg)
Title: Re: RG350 "ROGUE" CFW
Post by: Shanti777 on December 24, 2019, 08:18:18 am
@Ninoh-FOX But it comes with versions 4.1.0 atari800 https://atariage.com/forums/applications/core/interface/file/attachment.php?id=686449
Title: Re: RG350 "ROGUE" CFW
Post by: Ninoh-FOX on December 24, 2019, 10:56:12 am
@Ninoh-FOX But it comes with versions 4.1.0 atari800 https://atariage.com/forums/applications/core/interface/file/attachment.php?id=686449

oh, I see, the last code use libncurses6, I go to back, to version 5. This may fix this.


@Ninoh-FOX But it comes with versions 4.1.0 atari800 https://atariage.com/forums/applications/core/interface/file/attachment.php?id=686449

UP------

Fixed:

(https://fotos.subefotos.com/96a8d32ed38e651ef20818ef71eeb027o.jpg)

install this update opk please.

https://github.com/Ninoh-FOX/RG350-ROGUE-CFW/releases/tag/1.7.9.2fix
Title: Re: RG350 &quot;ROGUE&quot; CFW
Post by: Stouffa on December 24, 2019, 11:37:28 am
The error message I could briefly read did say something about missing a library, and it was version 5. I think there was also a message about inotify?

Sent from my F8331 using Tapatalk

Title: Re: RG350 &quot;ROGUE&quot; CFW
Post by: Ninoh-FOX on December 24, 2019, 11:50:18 am
The error message I could briefly read did say something about missing a library, and it was version 5. I think there was also a message about inotify?

Sent from my F8331 using Tapatalk

fixed
Title: Re: RG350 &quot;ROGUE&quot; CFW
Post by: Stouffa on December 24, 2019, 12:30:58 pm
Do I need to run the 1.7.9.2 update, then the fix file? (I had reinstalled the original 1.5 firmware)

Sent from my F8331 using Tapatalk

Title: Re: RG350 "ROGUE" CFW
Post by: rafavico on December 24, 2019, 01:28:38 pm
The update is only for Rogue Firmware, including previous libraries.
I think version 1.5 must have the old library and the emulator should run.
Title: Re: RG350 &quot;ROGUE&quot; CFW
Post by: Ninoh-FOX on December 24, 2019, 01:57:48 pm
Do I need to run the 1.7.9.2 update, then the fix file? (I had reinstalled the original 1.5 firmware)

Sent from my F8331 using Tapatalk

the photo is the proof

@Ninoh-FOX But it comes with versions 4.1.0 atari800 https://atariage.com/forums/applications/core/interface/file/attachment.php?id=686449

oh, I see, the last code use libncurses6, I go to back, to version 5. This may fix this.


@Ninoh-FOX But it comes with versions 4.1.0 atari800 https://atariage.com/forums/applications/core/interface/file/attachment.php?id=686449

UP------

Fixed:

(https://fotos.subefotos.com/96a8d32ed38e651ef20818ef71eeb027o.jpg)

install this update opk please.

https://github.com/Ninoh-FOX/RG350-ROGUE-CFW/releases/1.7.9.2fix/

The problem was that someone has updated the compilation tools without taking into account this or the compatibility with what already exists (he has not been the creator of the tools for this console), compiling them separately is solved, but who does not know this  You will have problems if you try to compile something with the code as it is currently, this already gave problems also when he changed his account and risk the shake libraries, luckily I have a copy of everything.
Title: Re: RG350 "ROGUE" CFW
Post by: Shanti777 on December 24, 2019, 02:56:12 pm
Tux for fast fix, I still use 1.7.0 firmware.
Title: Re: RG350 &quot;ROGUE&quot; CFW
Post by: Stouffa on December 24, 2019, 04:21:21 pm
So I need to use the flasher rather than the update opk? (i can only find the flasher from yesterday linked, no sign of anew updated opk file). Thanks for your time and assistance on this!

Sent from my F8331 using Tapatalk

Title: Re: RG350 &quot;ROGUE&quot; CFW
Post by: Ninoh-FOX on December 24, 2019, 05:11:38 pm
So I need to use the flasher rather than the update opk? (i can only find the flasher from yesterday linked, no sign of anew updated opk file). Thanks for your time and assistance on this!

Sent from my F8331 using Tapatalk

Yes. You can updete for flashe and later update the "patch" or try update direct from update "patch"
Title: Re: RG350 "ROGUE" CFW
Post by: Xarr on December 24, 2019, 07:11:16 pm
Thank you so much for your hard work. So exciting to see even more being pulled out of our new devices.  Particularly excited for the possible sleep feature!   ;D

I do have one question that is keeping me from updating my personal RG350.  I have 2 Units right how and one is running your latest build installed from scratch.  I have one emulator in particular, XMAME 1.3, that for some reason the start and select buttons are not recognized.  Anyone else have this issue? I've been troubleshooting but not sure if it is the CFW or XMAME 1.3 (only build I've found is for GCWZERO and has an alternative install process).  Is anyone able to run Xmame properly in this CFW, and if so do you have a link to the build of XMAME you are using? 
Title: Re: RG350 "ROGUE" CFW
Post by: Ninoh-FOX on December 24, 2019, 11:58:38 pm
Thank you so much for your hard work. So exciting to see even more being pulled out of our new devices.  Particularly excited for the possible sleep feature!   ;D

I do have one question that is keeping me from updating my personal RG350.  I have 2 Units right how and one is running your latest build installed from scratch.  I have one emulator in particular, XMAME 1.3, that for some reason the start and select buttons are not recognized.  Anyone else have this issue? I've been troubleshooting but not sure if it is the CFW or XMAME 1.3 (only build I've found is for GCWZERO and has an alternative install process).  Is anyone able to run Xmame properly in this CFW, and if so do you have a link to the build of XMAME you are using?

This not is for the cfw. Xmame has the buttons with combos, If I don't remember bad, start+select is coin, I alwais change the buttons from the mame menu.
Title: Re: RG350 "ROGUE" CFW
Post by: lbialy on December 27, 2019, 12:32:10 am
Hello everyone,
I've just got my brand new rg350 from my wife as christmas gift, so last few hours i spent reading forums and downloading roms :P
I would like to update stock firmware, i found Ninoh's version, and original? 1.5 in other thread, but i can't find anywhere any comparsion what firmware is actually better or more stable. Could You give me any hint?
I don't know if i understood instructions right, but if it's my first update, i have to put out internal sd anyway to put there sd_image.bin, or i can just simply run rg350-flasher.opk ?

Really thank You in advance,
Lukas
Title: Re: RG350 "ROGUE" CFW
Post by: goodfodder on December 27, 2019, 12:06:13 pm
Hello everyone,
I've just got my brand new rg350 from my wife as christmas gift, so last few hours i spent reading forums and downloading roms :P
I would like to update stock firmware, i found Ninoh's version, and original? 1.5 in other thread, but i can't find anywhere any comparsion what firmware is actually better or more stable. Could You give me any hint?
I don't know if i understood instructions right, but if it's my first update, i have to put out internal sd anyway to put there sd_image.bin, or i can just simply run rg350-flasher.opk ?

Really thank You in advance,
Lukas

First off as this fw is not official it is not recommend for inexperienced users as it requires a good level of technical understanding to install and configure correctly. The image does not contain any emulators nor their configurations.

If you decide to install, strongly recommend you use a new card and keep the original. This will of course invalidate your warranty hence install at your own risk
Title: Re: RG350 "ROGUE" CFW
Post by: jackclown on December 27, 2019, 05:50:23 pm
I'm using the last custom firmware update (1.7.9.2) and some of the opk won't show up or work when I move them from the external sd card to the internal
Title: Re: RG350 &quot;ROGUE&quot; CFW
Post by: _-Caleb-_ on December 27, 2019, 05:53:57 pm
I'm using the last custom firmware update (1.7.9.2) and some of the opk won't show up or work when I move them from the external sd card to the internal
Rogue uses different routes for gmenu2x, but i dont remember the New one atm...

Enviado desde mi Redmi Note 6 Pro mediante Tapatalk

Title: Re: RG350 "ROGUE" CFW
Post by: grooby on December 28, 2019, 07:22:44 am
Noticed that few of the shell scripts in /etc/init.d does not have executable status.  is that by design?


drwxr-xr-x   10 root     root           921 Dec 23  2019 ..
-rwxr-xr-x    1 root     root           136 Dec 16  2019 S01checkroot.sh
-rwxr-xr-x    1 root     root           495 Dec 16  2019 S01logging
-rwxr-xr-x    1 root     root           274 Dec 16  2019 S05avahi-setup.sh
-rwxr-xr-x    1 root     root           302 Dec 16  2019 S08ftphome.sh
-rwxr-xr-x    1 root     root           559 Dec 16  2019 S08modules.sh
-rwxr-xr-x    1 root     root          1492 Dec 16  2019 S10udev
-rwxr-xr-x    1 root     root           776 Dec 16  2019 S15localfsinit.sh
-rwxr-xr-x    1 root     root           725 Dec 16  2019 S20watchdog.sh
-rwxr-xr-x    1 root     root           345 Dec 16  2019 S40network
-rwxr-xr-x    1 root     root           285 Dec 16  2019 S50avahi-daemon
-rwxr-xr-x    1 root     root           607 Dec 16  2019 S50dropbear-keys.sh
-rwxr-xr-x    1 root     root           426 Dec 16  2019 S90brightness.sh
-rwxr-xr-x    1 root     root           509 Dec 16  2019 S90volume.sh
-rwxr-xr-x    1 root     root           836 Dec 17  2019 S91pwswd.sh
-rw-r--r--    1 root     root           126 Dec 16  2019 S95governor.sh
-rwxr-xr-x    1 root     root           704 Dec 16  2019 S98localscripts.sh
-rwxr-xr-x    1 root     root           583 Dec 23  2019 S99lowpowd.sh
-rw-r--r--    1 root     root           186 Dec 16  2019 S99mount-system.sh
-rw-r--r--    1 root     root          1735 Dec 23  2019 S99part-resize.sh
-rw-r--r--    1 root     root          1412 Dec 16  2019 S99swap.sh
-rw-r--r--    1 root     root           396 Dec 16  2019 S99treconfig.sh
-rwxr-xr-x    1 root     root           675 Dec 16  2019 rcS
Title: Re: RG350 "ROGUE" CFW
Post by: grooby on December 28, 2019, 09:51:02 am
Also, how do I create a Games section?

Edit - Looks like adding the games opk into the apps folder will auto show up under the "Games" section.
Title: Re: RG350 "ROGUE" CFW
Post by: DJM on December 28, 2019, 09:51:34 am
RG350 firmware "Rogue" edition

Is this firmware also supposed to improve emulator performances?
Title: Re: RG350 "ROGUE" CFW
Post by: michaelpegaso on December 28, 2019, 10:39:44 am
RG350 firmware "Rogue" edition

Is this firmware also supposed to improve emulator performances?

Among other things, it has a small overclock that can obtain an emulator level improvement. regards
Title: Re: RG350 "ROGUE" CFW
Post by: rafavico on December 28, 2019, 10:46:20 am
If you install an opk with Games category assigned, the section is created automatically. But you can create sections pressing SELECT in gmenu2x and "Add a section".
Title: Re: RG350 "ROGUE" CFW
Post by: Selven on December 28, 2019, 08:22:35 pm
Hi nino i really like your work on rg 350, i'm a noob on this type of devices, so please be patient with my question:
1) your firmware missing all emulators, it has only psx4all, where i can find the others?
2) i've tried psx4all and it seems to not keep the save data, i have done something wrong? there is a documentation to check if i have evrything on the right folder?
3) i'm italian, i know you are spanish, so i want to translate the missing interface text for gmenu2x, there is a way to have a italian file and a complete english file to work on it?
4) the user interface is really chaotic, evry program has his set of command, is possibly to unify the interface command?
5) the poweroff and reboot on setting tab is really hard to find evry time, is possible to move them in another place of interface?
6) is really needed an application to change the date and time of consolle? is not possible to switch them on settings tab?
As i've said i'm a noob, but if you want i will like to help you, i just need some documentation and reference to know where to start with the issue i've pointed.
Thx for your support
Title: Re: RG350 "ROGUE" CFW
Post by: rafavico on December 29, 2019, 10:18:02 am
Hi @Selven.

The doc folder is in process. There will be info about how to configure emulators, undertand its folders, etc... This folder will grow step to step, but for now there is only spanish docs (plain txt), easy to translate.

What do you mean "the interface is chaotic"? Gmenu2x or programs launched from gmenu2x? Many programs come from Gcw and are from differents authors, unify that is very slow (or difficult). Or do you mean another thing?

Thanks.
Title: Re: RG350 "ROGUE" CFW
Post by: Selven on December 29, 2019, 05:07:23 pm
hi @rafavico
for interface i mean both gmenu2x and the program itself, for example gmenu2x use a to launch and start to go back.
clock is an application used only to change date and time of the consolle and the only way to get out is to reboot the consolle
network not work is not possible to set the id of the consolle and connect it to a pc and it use a menu voices to exit
esoteric is an alternative front end, it just have date and time under setting tab, and it use b to go back.
i hope to have explained myself.
anyway i've found some typo for example on esoteric you have umount (not present on gmenu2x) but the right name is unmount.
for now esoteric interface is the most advanced one, but for example i think it should better to move the power menu on the left menu and actually have a way to operate with the little icon on the bottom left, to properly set volume and brightness unmount the sd etcetera
i think the volume and brightness should have their proper setting on settings
another good thing should be the possibility to set the position of the menu form left to bottom/righ or up.
as i've said i'm a noob and i don't know how to do this changes, if there is a way i canhelp, and a documentation to find for learn i will like to help, for now i can sure help you translating missing italian strings, like description, but i need to know at least where to find the italian file and where to find a complete english file as a source

Title: Re: RG350 "ROGUE" CFW
Post by: Ninoh-FOX on December 29, 2019, 05:21:55 pm
hi @rafavico
for interface i mean both gmenu2x and the program itself, for example gmenu2x use a to launch and start to go back.
clock is an application used only to change date and time of the consolle and the only way to get out is to reboot the consolle
network not work is not possible to set the id of the consolle and connect it to a pc and it use a menu voices to exit
esoteric is an alternative front end, it just have date and time under setting tab, and it use b to go back.
i hope to have explained myself.
anyway i've found some typo for example on esoteric you have umount (not present on gmenu2x) but the right name is unmount.
for now esoteric interface is the most advanced one, but for example i think it should better to move the power menu on the left menu and actually have a way to operate with the little icon on the bottom left, to properly set volume and brightness unmount the sd etcetera
i think the volume and brightness should have their proper setting on settings
another good thing should be the possibility to set the position of the menu form left to bottom/righ or up.
as i've said i'm a noob and i don't know how to do this changes, if there is a way i canhelp, and a documentation to find for learn i will like to help, for now i can sure help you translating missing italian strings, like description, but i need to know at least where to find the italian file and where to find a complete english file as a source

this... hmmm... for exit of clock only need press select...

And Isoteric not is me, is of @podulator.
Title: Re: RG350 "ROGUE" CFW
Post by: Selven on December 29, 2019, 05:53:19 pm
hi @Ninoh-FOX
for me both esoteric and gmenu2x is not important esoteric is much advanced as gui, but miss some of the update you made on gmenu2x (for example it has no translation at all or the cpu is set to max 960)
the problem itself is that they are a bunch of different program anyone of them working in it's own way.
Quote
this... hmmm... for exit of clock only need press select...
as you can see in gmenu2x the exit is start here it is select, anyway i prefer to set date and time on settings like esoteric
esoteric has also an cool option to mount/unmount the external sd.
a bug for you is the network has not the possibility to set the ip to connect the consolle to pc, with original firmware 1.5 it actually works, here with the 1.7.9.2fix i see no network interface at all.
as i've said i'm a noob, and i don't know who made what, if there is a documentation i will like to learn how to help, just mount the external sd card it was an reasearch for me, because on your github page you don't have the documentation that explain how to set it in order to work with your firmware
For example will help know wath will be the official rogue frontend, if it is gmenu2x i will like to work on it, if it is esoteric it miss all your latest implementation
Title: Re: RG350 "ROGUE" CFW
Post by: Ninoh-FOX on December 29, 2019, 09:42:54 pm
hi @Ninoh-FOX
for me both esoteric and gmenu2x is not important esoteric is much advanced as gui, but miss some of the update you made on gmenu2x (for example it has no translation at all or the cpu is set to max 960)
the problem itself is that they are a bunch of different program anyone of them working in it's own way.
Quote
this... hmmm... for exit of clock only need press select...
as you can see in gmenu2x the exit is start here it is select, anyway i prefer to set date and time on settings like esoteric
esoteric has also an cool option to mount/unmount the external sd.
a bug for you is the network has not the possibility to set the ip to connect the consolle to pc, with original firmware 1.5 it actually works, here with the 1.7.9.2fix i see no network interface at all.
as i've said i'm a noob, and i don't know who made what, if there is a documentation i will like to learn how to help, just mount the external sd card it was an reasearch for me, because on your github page you don't have the documentation that explain how to set it in order to work with your firmware
For example will help know wath will be the official rogue frontend, if it is gmenu2x i will like to work on it, if it is esoteric it miss all your latest implementation

Well, what happens to you is strange, the network application has to go out in the gmenu, maybe you accidentally deleted something, to solve it, go to the file explorer and delete the folder ./gmenu2x from /local/home/ and restart the console. This way you should get the missing icons again.

And I did not know that you could change the IP of the console, this is always 10.1.1.2
Title: Re: RG350 "ROGUE" CFW
Post by: rafavico on December 29, 2019, 09:51:46 pm
hi @Selven
I understand what you say, this firmware try to improve handling adjusting details, replacing some old apps like input testers or clock, and adding features, but this go slowly.

Regarding to docs, don't worry, for now there is only a document for testing purposes, there are several planned that will be organized before christmas and provide a way to translate them.
Title: Re: RG350 "ROGUE" CFW
Post by: Selven on December 30, 2019, 04:32:53 am
hi @Ninoh-FOX
the network program is present is the usb0 not set as network interface
(https://i.ibb.co/7ynjT3q/IMG-20191230-051548.jpg) (https://ibb.co/7ynjT3q)(https://i.ibb.co/58KyL4h/IMG-20191230-051650.jpg) (https://ibb.co/58KyL4h)
this is 1.7.9.1 flasher updated via opk to 1.7.9.2 and then to last fix
hi @rafavico
i'm not here to make rush, i will like to help, so if you have documentation link valid to learn also if not specific fpr rg350 i will like to start to check it

Title: Re: RG350 "ROGUE" CFW
Post by: Ninoh-FOX on December 30, 2019, 04:53:24 am
hi @Ninoh-FOX
the network program is present is the usb0 not set as network interface
(https://i.ibb.co/7ynjT3q/IMG-20191230-051548.jpg) (https://ibb.co/7ynjT3q)(https://i.ibb.co/58KyL4h/IMG-20191230-051650.jpg) (https://ibb.co/58KyL4h)
this is 1.7.9.1 flasher updated via opk to 1.7.9.2 and then to last fix
hi @rafavico
i'm not here to make rush, i will like to help, so if you have documentation link valid to learn also if not specific fpr rg350 i will like to start to check it
Omg... Use the another usb port, the usb port from you photo is for otg usb adapter.

(https://uploads.tapatalk-cdn.com/20191230/6c5b9b2961e7e0f5fc23b3a7b461fffe.jpg)

This is my usb otg c adapter (it is homemade XD)

Enviado desde mi Redmi 4 mediante Tapatalk
Title: Re: RG350 "ROGUE" CFW
Post by: Selven on December 30, 2019, 05:36:31 am
it worked! thx @Ninoh-FOX, now the next question what will be the official frontend? gmenu or esoteric?
as i've said i will like to translate the interface in italian, so i need at least to know what of the 2 interfaces i have to check on
additional questions:
where is the opk of esoteric? i like to try the latest build and i want to remove the old one just done, charged the latest opk loaded and executed the update option, it not change the compilation date but the system is now up to date!
is not possible to set rg350 to work like a phone instead to use a client like filezilla?
wow your otg adapter is cool, i will not have the knowledge to make one like you do you know an otg wifi nano adapter to use with rg350?
Title: Re: RG350 "ROGUE" CFW
Post by: Ninoh-FOX on December 30, 2019, 09:54:53 am
it worked! thx @Ninoh-FOX, now the next question what will be the official frontend? gmenu or esoteric?
as i've said i will like to translate the interface in italian, so i need at least to know what of the 2 interfaces i have to check on
additional questions:
where is the opk of esoteric? i like to try the latest build and i want to remove the old one just done, charged the latest opk loaded and executed the update option, it not change the compilation date but the system is now up to date!
is not possible to set rg350 to work like a phone instead to use a client like filezilla?
wow your otg adapter is cool, i will not have the knowledge to make one like you do you know an otg wifi nano adapter to use with rg350?

The official is gmenu2x, esoteric is in the system, but you can update esoteric with the his opk.

For that the console works in filezilla you need putout the password in the opk network, and in win10 you need the drivers.
Title: Re: RG350 "ROGUE" CFW
Post by: rafavico on December 30, 2019, 01:41:25 pm
hi @rafavico
i'm not here to make rush, i will like to help, so if you have documentation link valid to learn also if not specific fpr rg350 i will like to start to check it
Hi... I know  :) , give us some time to drink a little and celebrate the new year and three kings day, we need a clear head before  ;)
Title: Re: RG350 "ROGUE" CFW
Post by: Ninoh-FOX on December 31, 2019, 01:52:42 am
hi @rafavico
i'm not here to make rush, i will like to help, so if you have documentation link valid to learn also if not specific fpr rg350 i will like to start to check it
Hi... I know  :) , give us some time to drink a little and celebrate the new year and three kings day, we need a clear head before  ;)

Rafa, battery 100% looooooong time adjusted (I tested this with a multimeter)
Title: Re: RG350 "ROGUE" CFW
Post by: rafavico on December 31, 2019, 10:58:27 am
A lot more accurate battery now.  ;)
Title: Re: RG350 "ROGUE" CFW
Post by: ace9094 on December 31, 2019, 01:28:28 pm
A lot more accurate battery now.  ;)

Awesome... looks like a great improvement :)
Title: Re: RG350 &quot;ROGUE&quot; CFW
Post by: Stouffa on December 31, 2019, 07:13:17 pm
A lot more accurate battery now.  ;)
What's the name of the opk to show that display information? (looks quite useful)

Sent from my F8331 using Tapatalk

Title: Re: RG350 &quot;ROGUE&quot; CFW
Post by: Ninoh-FOX on December 31, 2019, 07:37:18 pm
A lot more accurate battery now.  ;)
What's the name of the opk to show that display information? (looks quite useful)

Sent from my F8331 using Tapatalk
RG350-Tester.opk, by Rafa Vico.

Enviado desde mi Redmi 4 mediante Tapatalk

Title: Re: RG350 &quot;ROGUE&quot; CFW
Post by: Stouffa on December 31, 2019, 09:07:01 pm
I must try download it at some stage thanks again for all your hard work! Wishing you all the best for 2020!!

Sent from my F8331 using Tapatalk

Title: Re: RG350 "ROGUE" CFW
Post by: rafavico on December 31, 2019, 09:55:34 pm
It's the default tester of Rogue CFW too.  :)
Title: Re: RG350 "ROGUE" CFW
Post by: grooby on December 31, 2019, 10:07:31 pm
@Ninoh-FOX - I noticed that the actual volume from 0 to 1 (no sound to 1 press of Vol+) is a fairly large jump.  In Alsamixer, PCM volume goes from 0 to 32 or 33.  Subsequent Vol+ increase the PCM volume by 1.  Is this by design?  If so, can you tell me how I can configure the initial jump value?
Title: Re: RG350 &quot;ROGUE&quot; CFW
Post by: Ninoh-FOX on December 31, 2019, 11:43:28 pm
@Ninoh-FOX - I noticed that the actual volume from 0 to 1 (no sound to 1 press of Vol+) is a fairly large jump.  In Alsamixer, PCM volume goes from 0 to 32 or 33.  Subsequent Vol+ increase the PCM volume by 1.  Is this by design?  If so, can you tell me how I can configure the initial jump value?
This theme is problem of hardware, nothing to do.

Enviado desde mi Redmi 4 mediante Tapatalk

Title: Re: RG350 "ROGUE" CFW
Post by: GXT on January 01, 2020, 10:11:45 am
Rafa, battery 100% looooooong time adjusted (I tested this with a multimeter)
is the value POWER_SUPPLY_VOLTAGE_MAX_DESIGN a guess again (https://boards.dingoonity.org/gcw-releases/pybattery/msg116146/#msg116146)?


it should remember the highest value and take it as 100% until a new higher value occours
Title: Re: RG350 "ROGUE" CFW
Post by: rafavico on January 01, 2020, 11:36:13 am
It's not a guest, the battery has been measured with a multimeter, and adjust in kernel. Programs read the value that kernel send, and changes a little when charging, but is more accuracy than previous.

Before, the kernel was checking values of little battery (not real one), and console showed 100% a lot of hours until it start to decrease.

Did you mean this?
Title: Re: RG350 "ROGUE" CFW
Post by: Selven on January 01, 2020, 11:20:25 pm
ok, i've studied myself and i found where the translation files are on rg350, but there is the problem that i cannot see (and so not copy or replace) the folder via ftp or explorer, so i cannot work on them, there is the possibility to add mass storage mode option or other ways to make all the files visible?
Title: Re: RG350 "ROGUE" CFW
Post by: GXT on January 02, 2020, 04:50:44 am
It's not a guest, the battery has been measured with a multimeter, and adjust in kernel. Programs read the value that kernel send, and changes a little when charging, but is more accuracy than previous.
the multimeter shows only the value of right now
but we all know, the capacity of the battery changes over time
also, if you replace the battery the values will change, that's another reason why the value POWER_SUPPLY_VOLTAGE_MAX_DESIGN should be handled dynamically
Title: Re: RG350 "ROGUE" CFW
Post by: GXT on January 02, 2020, 05:00:42 am
is it possible to include the 'onscreen keyboard driver' from uClinux so that we can boot directly to shell?

(https://psplinux.info/wp-content/uploads/2011/09/SDC10113_crop-480px.jpg)
Title: Re: RG350 &quot;ROGUE&quot; CFW
Post by: Ninoh-FOX on January 02, 2020, 05:19:10 am
It's not a guest, the battery has been measured with a multimeter, and adjust in kernel. Programs read the value that kernel send, and changes a little when charging, but is more accuracy than previous.
the multimeter shows only the value of right now
but we all know, the capacity of the battery changes over time
also, if you replace the battery the values will change, that's another reason why the value POWER_SUPPLY_VOLTAGE_MAX_DESIGN should be handled dynamically
curiously I obtained the same value in the two consoles (PG2 and RG350), if you feel that this is not safe, or that the console will explode causing particles of plastic, metal and crusts to be stuck in the retina and cornea of ​​your eyes, causing a  terminal blindness, you can install another fw.

Enviado desde mi Redmi 4 mediante Tapatalk

Title: Re: RG350 "ROGUE" CFW
Post by: Selven on January 04, 2020, 01:06:16 pm
hi @Ninoh-FOX
typo on readme:
under 1.7.9.3
Battery accurasy.
should be
Battery accuracy.
under 1.7.9.2
Optimized update opk script for that ckeck and repair boot partition.
should be
Optimized update opk script to ckeck and repair boot partition.
under 1.7.9.1.
Optimized the first boot set partition and format file system, this no is rewhite anymore, only with flasher install.
should be
Optimized the first boot set partition and format file system, this no longer rewrite, only with flasher install.

Gmenu2x now show the porcentage of the battery too.
should be
Gmenu2x now show the percentage of the battery too.

Gmenu2x can too now change the cpu of the console betweer MAX and MIN for save battery (for example for GBC emu)
should be
Also Gmenu2x can now change the cpu frequency of the console between MAX and MIN to save battery (for example with GBC emu)

i have also problem with esoterc bot rg350 test and network, when close push me out from it in gmenunx, and i cannot return to it, i have to reboot the consolle!
is it possible to have esoteric in opk? bot for the sake of choiche to remove it, and to execute the update/repair option
wich version of esoteric is included under 1.7.9.3?
the compiled date is more updated from the latest 1.0.5 release
Title: Re: RG350 "ROGUE" CFW
Post by: Ninoh-FOX on January 04, 2020, 02:25:05 pm
Esoteric is a proyect by Podulator, I only put in the system the last code in binary, but you can use the opk.
Title: Re: RG350 "ROGUE" CFW
Post by: Selven on January 04, 2020, 02:28:41 pm
hi @Ninoh-FOX
i understand this, the question is, instead to have the code from binary is possible to have it in opk format?
in this way you have the option to remove esoteric from rg350, and the full restore/update option
Title: Re: RG350 "ROGUE" CFW
Post by: Eliwood_san on January 05, 2020, 12:22:17 am
@Ninoh-FOX Any plans  to use your Rogue Firmware Edition in the GCW Zero console?

Its the only Ingenic processor left,all the major players (pocketgo2,r350g etc ) all of them have a port of your firmware.

If you need someone from betatesting i dont mind use my gcw zero to sacrifice  ;)
Title: Re: RG350 "ROGUE" CFW
Post by: Ninoh-FOX on January 05, 2020, 09:13:59 am
hi @Ninoh-FOX
i understand this, the question is, instead to have the code from binary is possible to have it in opk format?
in this way you have the option to remove esoteric from rg350, and the full restore/update option

No

@Ninoh-FOX Any plans  to use your Rogue Firmware Edition in the GCW Zero console?

Its the only Ingenic processor left,all the major players (pocketgo2,r350g etc ) all of them have a port of your firmware.

If you need someone from betatesting i dont mind use my gcw zero to sacrifice  ;)

I don't have the GCW zero for test.
Title: Re: RG350 "ROGUE" CFW
Post by: Eliwood_san on January 06, 2020, 12:31:53 am
@Ninoh-FOX  Thats weird,i thought those developments for all those china consoles are similiar for the GCW Zero.The only common their share its the ingenic processor, its the same for all.I can understand  you cant develop because the GCW Zero  the supporters chinese doesnt want their contribution of their software to the dead GCW Zero  or the "devs for the gcw zero".Well i put "devs" because nobody have develop any important firmware or new software for the GCW Zero since 2014.


If i have your knowledge i will develop your firmware,port it to the GCW Zero and help to other folks to have equal software for all the ingenics.
Title: Re: RG350 "ROGUE" CFW
Post by: Anubys on January 06, 2020, 03:11:52 pm
Sorry if it was asked before, but I am now on v1.7.9.1, can I use opk update to 1.7.9.3 right now or do I have to update to 1.7.9.2 at first then to 1.7.9.3?
Thanks!
Title: Re: RG350 &quot;ROGUE&quot; CFW
Post by: Stouffa on January 06, 2020, 05:36:43 pm
Sorry if it was asked before, but I am now on v1.7.9.1, can I use opk update to 1.7.9.3 right now or do I have to update to 1.7.9.2 at first then to 1.7.9.3?
Thanks!
The newest update will contain all the required files, you don't need the intermediate update opk

Sent from my F8331 using Tapatalk

Title: Re: RG350 &quot;ROGUE&quot; CFW
Post by: Anubys on January 06, 2020, 08:27:09 pm
Sorry if it was asked before, but I am now on v1.7.9.1, can I use opk update to 1.7.9.3 right now or do I have to update to 1.7.9.2 at first then to 1.7.9.3?
Thanks!
The newest update will contain all the required files, you don't need the intermediate update opk

Sent from my F8331 using Tapatalk

Great, thank you!
Title: Re: RG350 "ROGUE" CFW
Post by: hi-ban on January 06, 2020, 08:33:27 pm
@Ninoh-FOX  Thats weird,i thought those developments for all those china consoles are similiar for the GCW Zero.The only common their share its the ingenic processor, its the same for all.I can understand  you cant develop because the GCW Zero  the supporters chinese doesnt want their contribution of their software to the dead GCW Zero  or the "devs for the gcw zero".Well i put "devs" because nobody have develop any important firmware or new software for the GCW Zero since 2014.


If i have your knowledge i will develop your firmware,port it to the GCW Zero and help to other folks to have equal software for all the ingenics.

FYI the rogue firmware is a fork of the RG350 firmware, which is a fork of the GCW0 firmware.
In other words, all this "new" firmwares are just ports of the same "old" GCW0 firmware.
Title: Re: RG350 "ROGUE" CFW
Post by: goodfodder on January 06, 2020, 09:50:25 pm
Ninoh - any chance of creating a release with a higher overclock or overclock options? Would have thought a 20% oc would be easily achievable given ingenic supported 1.2ghz.
Title: Re: RG350 "ROGUE" CFW
Post by: Ninoh-FOX on January 06, 2020, 10:45:12 pm
Ninoh - any chance of creating a release with a higher overclock or overclock options? Would have thought a 20% oc would be easily achievable given ingenic supported 1.2ghz.

1.2Ghz is unstable, some consoles (according to the version of the board, mine for example that is rg350_1.5) do not even start.
Title: Re: RG350 "ROGUE" CFW
Post by: Eliwood_san on January 07, 2020, 12:12:03 am
@Ninoh-FOX  Thats weird,i thought those developments for all those china consoles are similiar for the GCW Zero.The only common their share its the ingenic processor, its the same for all.I can understand  you cant develop because the GCW Zero  the supporters chinese doesnt want their contribution of their software to the dead GCW Zero  or the "devs for the gcw zero".Well i put "devs" because nobody have develop any important firmware or new software for the GCW Zero since 2014.


If i have your knowledge i will develop your firmware,port it to the GCW Zero and help to other folks to have equal software for all the ingenics.



FYI the rogue firmware is a fork of the RG350 firmware, which is a fork of the GCW0 firmware.
In other words, all this "new" firmwares are just ports of the same "old" GCW0 firmware.

you are right ,old firmware with one feature...one of those consoles have otg support,and better emulators,For example snes9x use this version 1.60  and you can play Far East Eden Zero with 0 problems.

Those features and new software you cant use it in the GCW Zero.

Im not requesting hdmi support,only requesting a new firmware with all those good features missing from the GCW Zero.
Title: Re: RG350 "ROGUE" CFW
Post by: pcercuei on January 07, 2020, 12:59:34 am
Those features and new software you cant use it in the GCW Zero.

Im not requesting hdmi support,only requesting a new firmware with all those good features missing from the GCW Zero.
the RG350 has a dedicated USB host port (USB1). On the GCW Zero this USB host bus is used internally for the Wifi chip.
Title: Re: RG350 "ROGUE" CFW
Post by: hi-ban on January 07, 2020, 01:18:12 am
Emulators are not part of the firmware, and FYI all the jz4770 consoles are binary compatible. That means i can get a rg350 emulator OPK and run it on my gcw0, the same way i can run any gcw0 emulator OPK on my rg350. In fact, many of the rg350 emulators are from the gcw0.
Title: Re: RG350 "ROGUE" CFW
Post by: Eliwood_san on January 07, 2020, 04:05:32 am
mmmm @hi-ban it seems you dont understand im talking about development software.I know firmware and emulators are separated..not integrated -_- .... but the development its very different level comparing to the R350GH console.I see they have more support than the GCW Zero and have much software and enabling features like the otg.

I know your software hi-ban its multiplatform,it can be use it to anyone to have a proper ingenic processor.

Hello @pcercuei mmmm i thought in the kickstarter project one of their goals reached have otg enabled....so you are saying the GCW Zero it cant use the OTG function?Dont get me wrong,only asking if its possibe...if not i will understand it :(


Edit @pcercuei  and @hi-ban  Thanks for explain it.Dont worry to reply me.I understand at %100 all you say.
Title: Re: RG350 "ROGUE" CFW
Post by: goodfodder on January 07, 2020, 10:16:46 am
Ninoh - any chance of creating a release with a higher overclock or overclock options? Would have thought a 20% oc would be easily achievable given ingenic supported 1.2ghz.

1.2Ghz is unstable, some consoles (according to the version of the board, mine for example that is rg350_1.5) do not even start.

Thanks for the reply, sounds like it would need a bit more voltage which I am assuming is not an option
Title: Re: RG350 "ROGUE" CFW
Post by: Gravitys on January 07, 2020, 10:46:45 am
First of all, thank you for your work, this is a great improvment you are providing to RG350 owners ! :)

Yesterday i flashed form scratch a new 64gb SD to replaced internal card with 1.7.9.3, it went fine, everything working well. Today i copied the 1.7.9.4 update file via sftp in the apps internal folder, but when i launch it the only thing happening is a blinking "_" until i reboot.

Any idea ? i've tried to re-download/copy the update file to console, but same issue.

Thanks again
Title: Re: RG350 "ROGUE" CFW
Post by: Ninoh-FOX on January 07, 2020, 12:50:17 pm
First of all, thank you for your work, this is a great improvment you are providing to RG350 owners ! :)

Yesterday i flashed form scratch a new 64gb SD to replaced internal card with 1.7.9.3, it went fine, everything working well. Today i copied the 1.7.9.4 update file via sftp in the apps internal folder, but when i launch it the only thing happening is a blinking "_" until i reboot.

Any idea ? i've tried to re-download/copy the update file to console, but same issue.

Thanks again
This is stranger, the update work fine to me ?Can you send photos?

Enviado desde mi Redmi 4 mediante Tapatalk
Title: Re: RG350 "ROGUE" CFW
Post by: Gravitys on January 07, 2020, 01:33:35 pm
https://www.youtube.com/watch?v=pq_pKS_zccA
Title: Re: RG350 "ROGUE" CFW
Post by: Ninoh-FOX on January 07, 2020, 02:09:40 pm
oh, I see, you may update from gmenu2x, Esoteric fail sometimes with the updates, I don't know the cause.
Title: Re: RG350 "ROGUE" CFW
Post by: Gravitys on January 07, 2020, 02:51:56 pm
It worked perfectly, thanks !!
Title: Re: RG350 "ROGUE" CFW
Post by: Anubys on January 07, 2020, 05:43:06 pm
It happened to me too, even with earlier updates too. just press Select, and it will continue updateing.
Title: Re: RG350 "ROGUE" CFW
Post by: ace9094 on January 11, 2020, 06:31:50 pm
Do you think it is possible to add "Animated GIF" to your next release of  Rogue CFW?  I would like to use something like GIF below.

I have lots of Videos I can convert for almost all of the systems supported on the RG-350 and PocketGo 2 :)

(https://i.ibb.co/0t9ZFTc/Hyper-Video-mpeg4.gif)
Title: Re: RG350 "ROGUE" CFW
Post by: michaelpegaso on January 11, 2020, 07:59:33 pm
Do you think it is possible to add "Animated GIF" to your next release of  Rogue CFW?  I would like to use something like GIF below.

I have lots of Videos I can convert for almost all of the systems supported on the RG-350 and PocketGo 2 :)

(https://i.ibb.co/0t9ZFTc/Hyper-Video-mpeg4.gif)

I love how it looks
Title: Re: RG350 "ROGUE" CFW
Post by: jackclown on January 11, 2020, 09:30:46 pm
Gmenu2x now can show two type of previews (put in /(romsdir)/.previews/).

Can some explain to me how? I created the folder .previews with the .pgn in it nothing show up
Title: Re: RG350 "ROGUE" CFW
Post by: ace9094 on January 11, 2020, 10:13:55 pm
Gmenu2x now can show two type of previews (put in /(romsdir)/.previews/).

Can some explain to me how? I created the folder .previews with the .pgn in it nothing show up

Press select when on an emulator and choose edit... Then add file extensions for ,.png,.jpg after .zip

I think you need to do it for each emulator ;)
Title: Re: RG350 "ROGUE" CFW
Post by: rafavico on January 11, 2020, 10:26:59 pm
This is an example of structure. Roms and previews must to have same name (not extension).
Title: Re: RG350 "ROGUE" CFW
Post by: jackclown on January 11, 2020, 11:53:54 pm
My previews folder is has rafavico's example and I did what ace9094 said... still don't work :(
Title: Re: RG350 "ROGUE" CFW
Post by: ace9094 on January 12, 2020, 01:52:49 am
My previews folder is has rafavico's example and I did what ace9094 said... still don't work :(
Is the SD Card formated to Fat32 ? Maybe try ExFat...

See this topic https://boards.dingoonity.org/ingenic-jz4760-devices/retrofw-2-0-fba-previews-folder/msg192442/#msg192442 (https://boards.dingoonity.org/ingenic-jz4760-devices/retrofw-2-0-fba-previews-folder/msg192442/#msg192442) I know its for RS-07 but maybe worth a shot.... Test it on another SD card if you have one :)

That will help...

(https://i.ibb.co/0t9ZFTc/Hyper-Video-mpeg4.gif)

I love how it looks

Yeah... I think it would look great but Jack said it could cause issues and use lots of RAM but that was on PyMenu... Hopefully Ninoh-FOX can add support for animated GIF previews in the Rogue CFW.

I am also hoping someone could code animated GIF previews for FBA GCW0 (Version with the GUI)

Fingers Crossed 8)
Title: Re: RG350 "ROGUE" CFW
Post by: manikinator on January 12, 2020, 07:11:14 am
Hello,

When I try to copy FF7 Eboot (about 1.46GB), the console starts to get sluggish and the file copy starts to get slow - it slows down from 5MB/s to 10 KB/s

Is there something I might be doing wrong?

I'm using filezilla on windows 10, the same method works for the stock firmware.

Thanks in advance.
Title: Re: RG350 "ROGUE" CFW
Post by: iball on January 12, 2020, 07:26:01 am
Hello,

When I try to copy FF7 Eboot (about 1.46GB), the console starts to get sluggish and the file copy starts to get slow - it slows down from 5MB/s to 10 KB/s

Is there something I might be doing wrong?

I'm using filezilla on windows 10, the same method works for the stock firmware.

Thanks in advance.
Copying anything that big over USB networking is going to take a long time. 
Pop out the micro-SD card and put it in a USB card reader and copy the file over that way.
Title: Re: RG350 "ROGUE" CFW
Post by: nobk on January 12, 2020, 09:55:05 am
Is it possible upgrade toolchain gcc version from 4.9 to 6+ of your firmware. Because some project like EasyRPG player start using C++14 as baseline, which is not support by gcc 4.9. And gcc 5+ have different ABI, new program compile by g++ 5+ can not using  firmware's gcc 4.9 version stdc++ share library.
Title: Re: RG350 "ROGUE" CFW
Post by: Dowdheur on January 15, 2020, 02:53:54 pm
Hi !

Does anyone tried to use EmulationStation with ROGUE ?

I have the error "Could not initialize OpenGL" when I try to launch it.
Title: Re: RG350 "ROGUE" CFW
Post by: pcercuei on January 15, 2020, 07:19:17 pm
Hello @pcercuei mmmm i thought in the kickstarter project one of their goals reached have otg enabled....so you are saying the GCW Zero it cant use the OTG function?Dont get me wrong,only asking if its possibe...if not i will understand it :(
OTG (On-The-Go) means that the same USB port can act either as device (you plug it to a PC) or host (you plug USB devices to it). The RG350 does *not* support OTG, and it doesn't need to, because it supports USB device on USB2 and USB host on USB1.

OTG was never enabled on the GCW Zero because it could damage the hardware. Under some obscure conditions the "host mode" detection mechanism would irremediably fry, causing the Zero to always believe that a USB device is plugged, and therefore leading to the impossibility to connect the Zero to a PC anymore again.
Title: Re: RG350 "ROGUE" CFW
Post by: Ninoh-FOX on January 16, 2020, 06:12:12 am
Hi !

Does anyone tried to use EmulationStation with ROGUE ?

I have the error "Could not initialize OpenGL" when I try to launch it.

This weekend I go to make a release that fix this.
Title: Re: RG350 "ROGUE" CFW
Post by: GenGT on January 17, 2020, 04:06:49 pm
Hi !

Does anyone tried to use EmulationStation with ROGUE ?

I have the error "Could not initialize OpenGL" when I try to launch it.

This weekend I go to make a release that fix this.

Hi Nino, thanks for this firmware! I have the same problem. This fix will be wonderful
Gracias por adelantado
Title: Re: RG350 "ROGUE" CFW
Post by: Ninoh-FOX on January 18, 2020, 04:21:19 pm
New update with FIXERS!!!
Title: Re: RG350 "ROGUE" CFW
Post by: Selven on January 18, 2020, 06:22:18 pm
thx
Title: Re: RG350 "ROGUE" CFW
Post by: Stoofa on January 20, 2020, 09:16:26 am
New update with FIXERS!!!

Great work mate
Title: Re: RG350 "ROGUE" CFW
Post by: rafavico on January 21, 2020, 04:17:20 pm
@Selven if you want translate some texts to italian, you can check the project files and submit translations. Feel free to make any suggestion. Gmenu2x texts are at:
https://github.com/Ninoh-FOX/toolchain/tree/master/gmenu2x/data
Title: Re: RG350 "ROGUE" CFW
Post by: pyke on January 25, 2020, 11:03:44 pm
oh!  I didn't know I had a gun partner here, regards comrade!  8)
(https://fotos.subefotos.com/fab4684e240c0cc5395597b149669b63o.jpg)

Thank you for your service, sir.(https://external-content.duckduckgo.com/iu/?u=https%3A%2F%2Fthumbs.dreamstime.com%2Fb%2Femoji-army-solider-isolated-white-background-military-emoticon-wearing-beret-saluting-d-rendering-emoji-army-solider-isolated-108813414.jpg)
Title: Re: RG350 "ROGUE" CFW
Post by: Selven on January 26, 2020, 06:11:57 pm
hi @rafavico i just found the file and tried to translate, but gmenu2x not translate the interface, it translate only it's thing, but all the link created not get the translation
Title: Re: RG350 "ROGUE" CFW
Post by: rafavico on January 26, 2020, 10:18:10 pm
@Selven what messages did you try to translate? I think some gmenu2x messages don't call to translate function and have to be fixed.
Title: Re: RG350 "ROGUE" CFW
Post by: fillyfloater on January 26, 2020, 11:11:25 pm
Yes, couldn't get emulation station to work on rogue either, just creates an msdos menu selection, no other emulators show up...
Title: Re: RG350 "ROGUE" CFW
Post by: Selven on January 27, 2020, 06:14:44 pm
Hi @rafavico i've tried with Section names(settings, games, application) and all lunks and description in settings, gmenu2x get only one or 2 translation
Title: Re: RG350 "ROGUE" CFW
Post by: wallacefung on February 05, 2020, 06:36:41 pm
Thanks. I have updated to 1.7.9.6
Title: Re: RG350 "ROGUE" CFW
Post by: iball on February 06, 2020, 01:24:07 am
EDIT:  Nevermind
Title: Re: RG350 "ROGUE" CFW
Post by: Nikojiro on February 07, 2020, 08:52:33 am
Hi, I updated to 1.7.9.6, if I understood correctly the release notes I can format my external SD to ext3 or ext4?

I'd like that because FAT is very unreliable, and the RG350 won't boot if the dirty bit is set... Very annoying.

-- EDIT --

I formatted my external SD card to ext4 (using gparted), it's not recognized anymore. What did I miss? Changelog mentions "add script for format the external sdcard in ext4.". Where can I find that script?
Title: Re: RG350 "ROGUE" CFW
Post by: rafavico on February 07, 2020, 08:35:12 pm
The script is in Scriptrunner app, anyway ext3 works well too.
Title: Re: RG350 "ROGUE" CFW
Post by: dubsmachine on February 08, 2020, 08:30:45 am
Hi,
I installed Rogue onto my 350 and the Roms and emulators but FBA won't load games.
They are visible in the list but don't run.

Any ideas?

Sent from my SM-N975F using Tapatalk
Title: Re: RG350 "ROGUE" CFW
Post by: ace9094 on February 08, 2020, 10:23:27 am
Hi,
I installed Rogue onto my 350 and the Roms and emulators but FBA won't load games.
They are visible in the list but don't run.

Any ideas?

Sent from my SM-N975F using Tapatalk

Which verson of FBA are you using and which romset ?
Title: Re: RG350 &quot;ROGUE&quot; CFW
Post by: dubsmachine on February 08, 2020, 10:25:00 am
No idea, the ones that came installed.
I backed them up before installing Rogue so expected them to work.
How can I check the FBA version?

Sent from my SM-N975F using Tapatalk

Title: Re: RG350 "ROGUE" CFW
Post by: Nikojiro on February 10, 2020, 03:02:15 pm
Hi, I found an issue in 1.7.9.6. When editing a shortcut in GMenu2x, you can't choose freely the CPU frequency, the only available values are the minimum (360MHz) and the max (1020 or 1080 depending on the global setting).

There should be more steps to choose from, as some emulators can most probably run at lower clock speeds, and we'd spare some battery life.
Title: Re: RG350 "ROGUE" CFW
Post by: Ninoh-FOX on February 14, 2020, 08:53:07 pm
Hi, I found an issue in 1.7.9.6. When editing a shortcut in GMenu2x, you can't choose freely the CPU frequency, the only available values are the minimum (360MHz) and the max (1020 or 1080 depending on the global setting).

There should be more steps to choose from, as some emulators can most probably run at lower clock speeds, and we'd spare some battery life.

the cpu and actual kernel only support divisions in the cpufreq of /1 /3 /6 /8 and /12, not is possible a custom cpufreq options.
Title: Re: RG350 "ROGUE" CFW
Post by: hk91218112 on February 14, 2020, 11:46:25 pm
ROGUE is now the best system on the RG-350. I am very much looking forward to adding Asian language Unicode. It will be more perfect, thank you.
Title: Re: RG350 "ROGUE" CFW
Post by: evge-tlt on February 15, 2020, 07:20:44 am
Hi!

FAT32 SD does not work in version 1.7.9.7. Installed 1.7.9.6 and works again.
Title: Re: RG350 "ROGUE" CFW
Post by: Ninoh-FOX on February 16, 2020, 09:07:41 am
Hi!

FAT32 SD does not work in version 1.7.9.7. Installed 1.7.9.6 and works again.

Reupdated 1.7.9.7 with fat32 fix
Title: Re: RG350 "ROGUE" CFW
Post by: Nikojiro on February 17, 2020, 11:14:17 am
the cpu and actual kernel only support divisions in the cpufreq of /1 /3 /6 /8 and /12, not is possible a custom cpufreq options.

OK I understand, thanks.
Title: Re: RG350 "ROGUE" CFW
Post by: evge-tlt on February 19, 2020, 02:58:16 pm
Reupdated 1.7.9.7 with fat32 fix

Hi! fix 1.7.9.7 periodically loses the FAT32 SD card :(
On 1.7.9.6, everything is fine.
Title: Re: RG350 "ROGUE" CFW
Post by: _cyrAx on February 19, 2020, 05:53:05 pm
Reupdated 1.7.9.7 with fat32 fix

Hi! fix 1.7.9.7 periodically loses the FAT32 SD card :(
On 1.7.9.6, everything is fine.

I have to agree with that statement.

I periodically have to re-insert my exfat sd card too since .7.
Hope it'll help

By the way, awesome work on this firmware.
Title: Re: RG350 "ROGUE" CFW
Post by: Nikojiro on February 21, 2020, 11:45:33 am
I also experienced this issue. Boot is stuck and I have to take out the SD and reset.
Title: Re: RG350 "ROGUE" CFW
Post by: _cyrAx on February 22, 2020, 01:35:33 am
I also experienced this issue. Boot is stuck and I have to take out the SD and reset.

I also experienced kind of a black screen freeze.
Had to hit reset button.

Don't know if it is related or not
Title: Re: RG350 "ROGUE" CFW
Post by: Ninoh-FOX on February 22, 2020, 05:07:02 am
Reupdated 1.7.9.7 with fat32 fix

Hi! fix 1.7.9.7 periodically loses the FAT32 SD card :(
On 1.7.9.6, everything is fine.

That is fix
Title: Re: RG350 "ROGUE" CFW
Post by: HisokaRyodan on February 22, 2020, 10:40:35 pm
Love the firmware. Recently when from 1.7.9.4 to 1.7.9.7 and realized that when you enable the analog mode, the deadzone is all messed up when in esoteric. Also, when I remove esoteric, the buttons are extremely laggy.

Went back to 1.7.9.6 just to see if it was present, and it wasnt so staying at 1.7.9.6

Just reporting my findings to help development!

Does anyone know if there is a line we can add to a config to enable analog mode always? Instead of pressing Power+B every time we start up?
Title: Re: RG350 "ROGUE" CFW
Post by: evge-tlt on February 23, 2020, 03:58:37 pm
That is fix

on fix 02-15?

rg350-update-1.7.9.7-2020-02-14.opk - not work FAT32
rg350-update-1.7.9.7-2020-02-15.opk (fix) - on this fix FAT32 works with the problem! periodically loses the SD card.

will this be fixed in future versions?

Thanks.
Title: Re: RG350 "ROGUE" CFW
Post by: _cyrAx on February 25, 2020, 01:08:33 am
That is fix

on fix 02-15?

rg350-update-1.7.9.7-2020-02-14.opk - not work FAT32
rg350-update-1.7.9.7-2020-02-15.opk (fix) - on this fix FAT32 works with the problem! periodically loses the SD card.

will this be fixed in future versions?

Thanks.

I have personally did a clear flash of the re-updated  .7,
and have not re-experienced the SD bug yet.

Apply the reupdated  .7 opk update over the previous one did not work for me neither.

Hope it'll help
Title: Re: RG350 "ROGUE" CFW
Post by: rweizer on February 27, 2020, 01:14:45 am
So is it safest to use/flash 1.7.9.6 at this juncture in time when my RG350 arrives and I can pop a new sd card in it?
Title: Re: RG350 "ROGUE" CFW
Post by: DisgorgeX on February 29, 2020, 06:15:23 am
So what's the consensus on the latest version? Should I go with it, or 1.7.9.6? I'm new to this, I have stock on my daughter's RG350, probably gonna leave it as is, but I just flashed Rogue 1.7.9.7 onto a fresh 128GB stick for my clear RG350 to pop in when my flat stick mod arrives. Should I go with it, or is there a stable "go-to" build of Rogue I should reflash to before I go opening mine up and closing it a dozen times?

Thanks guys. Also yay first post, wandered in from the RG350 subreddit. Shout out lol.
Title: Re: RG350 "ROGUE" CFW
Post by: joeri87 on March 01, 2020, 12:41:25 am
I tried installing firmware 1.7.9.3, 1.7.9.6, 1.7.9.7 both using a clean SD card with sd_image.bin
 eteched or updating RG-350 Update (1.5.1) 10-27-2019-2 (STABLE RELEASE) to this using the rg350-flasher-1.7.9.x. OPK.

In all scenarios I get a bootloop. I have no Idea why. It's a regular RG350 and JZ4770 cpu.

Fresh install of RG-350 Update (1.5.1) 10-27-2019-2 (STABLE RELEASE) runs perfect...

Anybody else have bootloops?
Title: Re: RG350 "ROGUE" CFW
Post by: DisgorgeX on March 01, 2020, 01:00:34 am
I tried installing firmware 1.7.9.3, 1.7.9.6, 1.7.9.7 both using a clean SD card with sd_image.bin
 eteched or updating RG-350 Update (1.5.1) 10-27-2019-2 (STABLE RELEASE) to this using the rg350-flasher-1.7.9.x. OPK.

In all scenarios I get a bootloop. I have no Idea why. It's a regular RG350 and JZ4770 cpu.

Fresh install of RG-350 Update (1.5.1) 10-27-2019-2 (STABLE RELEASE) runs perfect...

Anybody else have bootloops?

I bit the bullet and decided to try rogue and installed the latest with an updater and got stuck in a loop. Ended up taking the internal out and flashing the image fresh and it worked. So far everything is going smoothish, lol. Trying to get my arcade roms to work, and eduke to work again. Those both broke, lol.

Edit: Duke is fixed, used the wrong grp file from my pc, switched them out in my RG port data folder so it won't happen when my second RG shows up Monday. Got the latest FBA, and have a 28 GB full 2016 romset that someone on reddit said was compatible and working for them, so we'll see if that works. If it does, both of my issues since switching to rogue have been solved and I can 100% recommend the current latest build. Will report back on the FBA issues soon, 15 mins left on the torrent.

Edit 2: Got it all working! 1.7.9.7 gets two thumbs up from this guy, lol.
Title: Re: RG350 "ROGUE" CFW
Post by: rweizer on March 01, 2020, 02:51:29 am
So what's the most stable fw for the system, then? Mine should be here this week and I'm just wondering what to go with at this point.
Title: Re: RG350 "ROGUE" CFW
Post by: ace9094 on March 01, 2020, 03:20:51 am
So what's the most stable fw for the system, then? Mine should be here this week and I'm just wondering what to go with at this point.

The latest version is fine... Just make a back up of your SD Card, then format the SD Card using HP Format Tool.

Personally I just got a new 64GB Micro SD and used that... You can get 32Gb cards for ?4 and 64GB for about ?8 on amazon.co.uk :)

Just follow the install guide and use the SD.Bin image and everything should be fine :)
Title: Re: RG350 "ROGUE" CFW
Post by: DisgorgeX on March 01, 2020, 07:52:29 am
So what's the most stable fw for the system, then? Mine should be here this week and I'm just wondering what to go with at this point.

Been using 1.7.9.7 for a few days now. Ran into two problems, both unrelated to the firmware and solved both. I'd go with it.
Title: Re: RG350 "ROGUE" CFW
Post by: joeri87 on March 01, 2020, 12:56:39 pm
More details on the bootloop
Title: Re: RG350 "ROGUE" CFW
Post by: joeri87 on March 01, 2020, 12:58:40 pm
Last pictures
Anybody an Idea? Fresh images all turn out like this. The regular image works perfect, just not rouge...
Title: Re: RG350 "ROGUE" CFW
Post by: rafavico on March 02, 2020, 07:45:53 am
What sd card are you using? brand, size.... did you formated it infat32? which app did you use?
Title: Re: RG350 "ROGUE" CFW
Post by: joeri87 on March 02, 2020, 07:22:01 pm
Yeah, I also doubted about the SD card, but I tried 3 card, all 32GB. Alle premium brands, one is Samsung Evo, one is Samsung Evo Plus and one is Sandisk Extreme. I also use them for my raspberry pi projects. Don't worry, this is not my first time with sd cards and images... I use SD card formatter and then flash them using Win32 etcher... Do these screenshots I made point towards a bad SD card?? It's so strange, the origional stable images works perfect.... Just not rogue... are there different hardware versions? Is mine fake?!
Title: Re: RG350 "ROGUE" CFW
Post by: renejr902 on March 03, 2020, 07:08:15 am
Hi! i just bought a rg350. i dont want to start a problem. im totally confused !! i read for a few hours in rg350 forum.
What is this firmware ??
Why should i use this one, instead of Jutley BASE 1.5 ? Is Jutley BASE 1.5 from opendingux team ?
Is this firmware done by the npaladin2000 guy from the gcw0 from 2014 firmware ?

Thanks a lot guys , i dont get it.
Title: Re: RG350 "ROGUE" CFW
Post by: rafavico on March 03, 2020, 08:56:00 am
Yeah, I also doubted about the SD card, but I tried 3 card, all 32GB. Alle premium brands, one is Samsung Evo, one is Samsung Evo Plus and one is Sandisk Extreme. I also use them for my raspberry pi projects. Don't worry, this is not my first time with sd cards and images... I use SD card formatter and then flash them using Win32 etcher... Do these screenshots I made point towards a bad SD card?? It's so strange, the origional stable images works perfect.... Just not rogue... are there different hardware versions? Is mine fake?!

It's weird that bootloop. There wouldn't exist any different hardware, I have the sandisk card, so don't know exactly why that happens. It looks like a sd problem, but is not normal 3 cards fail.
Maybe @Ninoh-FOX find something more in screenshots.
Title: Re: RG350 "ROGUE" CFW
Post by: alister667 on March 03, 2020, 10:13:23 pm
Did you burn the same image file onto the 3 SD cards? Maybe it was corrupted?

Yeah, I also doubted about the SD card, but I tried 3 card, all 32GB. Alle premium brands, one is Samsung Evo, one is Samsung Evo Plus and one is Sandisk Extreme. I also use them for my raspberry pi projects. Don't worry, this is not my first time with sd cards and images... I use SD card formatter and then flash them using Win32 etcher... Do these screenshots I made point towards a bad SD card?? It's so strange, the origional stable images works perfect.... Just not rogue... are there different hardware versions? Is mine fake?!

It's weird that bootloop. There wouldn't exist any different hardware, I have the sandisk card, so don't know exactly why that happens. It looks like a sd problem, but is not normal 3 cards fail.
Maybe @Ninoh-FOX find something more in screenshots.
Title: Re: RG350 "ROGUE" CFW
Post by: Nikojiro on March 04, 2020, 05:36:57 pm
@Ninoh-FOX and devs around, I have a question about GMenu2x previews.

I've set up fullscreen previews (used Skraper with a custom XML mix), and they work well. However I'd like to know if there is a configuration property in skin.conf or elsewhere that allows to define the transparency level of previews.

I'l not aware of one, but just in case, I'm asking  ;)
Title: Re: RG350 "ROGUE" CFW
Post by: rafavico on March 04, 2020, 05:44:51 pm
@Ninoh-FOX and devs around, I have a question about GMenu2x previews.

I've set up fullscreen previews (used Skraper with a custom XML mix), and they work well. However I'd like to know if there is a configuration property in skin.conf or elsewhere that allows to define the transparency level of previews.

I'l not aware of one, but just in case, I'm asking  ;)

I have to check it, I think it is hardcoded, but would be a good idea make it configurable. Don't know if it is possible now.
Title: Re: RG350 "ROGUE" CFW
Post by: joeri87 on March 07, 2020, 11:18:09 am
Jup I did, Burned the 96 and 92 image on all 3... When I etch regular branch image it works good... I can only think of different hardware... super dissapointed... Since the schreen went super fast i made a video and tried to make screenshots of the video... quite unfortunate that it's not showing the problem. Otherwise I stay with the regular image and move on to the odroid go advance some day :p

Did you burn the same image file onto the 3 SD cards? Maybe it was corrupted?

Yeah, I also doubted about the SD card, but I tried 3 card, all 32GB. Alle premium brands, one is Samsung Evo, one is Samsung Evo Plus and one is Sandisk Extreme. I also use them for my raspberry pi projects. Don't worry, this is not my first time with sd cards and images... I use SD card formatter and then flash them using Win32 etcher... Do these screenshots I made point towards a bad SD card?? It's so strange, the origional stable images works perfect.... Just not rogue... are there different hardware versions? Is mine fake?!

It's weird that bootloop. There wouldn't exist any different hardware, I have the sandisk card, so don't know exactly why that happens. It looks like a sd problem, but is not normal 3 cards fail.
Maybe @Ninoh-FOX find something more in screenshots.
Title: Re: RG350 "ROGUE" CFW GeGeo NeoGeo Emulator Issue
Post by: ace9094 on March 15, 2020, 08:33:07 am
Hi All,

Anyone have an issue getting GeGeo (NeoGeo Emulator) to run on 1.7.9.7 ?

It runs on 1.7.9.5 but same OPK file will not work... I have a custom version created with OPK Creator which will not even show when copied to apps, yet on older CFW versions it will show in the menu...

Strange, any ideas ?
Title: Re: RG350 "ROGUE" CFW
Post by: a330boy on March 17, 2020, 04:28:23 pm
@Ninoh-FOX Suggest you add scale mode that allows games display original, aspect, or stretch under Gmenu2x?
Title: Re: RG350 "ROGUE" CFW
Post by: rafavico on March 17, 2020, 04:51:32 pm
@Ninoh-FOX Suggest you add scale mode that allows games display original, aspect, or stretch under Gmenu2x?
Are you talking about previews or emulators?
Title: Re: RG350 "ROGUE" CFW
Post by: a330boy on March 17, 2020, 05:11:30 pm
@Ninoh-FOX Suggest you add scale mode that allows games display original, aspect, or stretch under Gmenu2x?
Are you talking about previews or emulators?

For emulators. I got idea from RetroFW 2.0. If only possible to do the same with ROGUE?
Title: Re: RG350 "ROGUE" CFW
Post by: rafavico on March 17, 2020, 06:03:57 pm
@Ninoh-FOX Suggest you add scale mode that allows games display original, aspect, or stretch under Gmenu2x?
Are you talking about previews or emulators?

For emulators. I got idea from RetroFW 2.0. If only possible to do the same with ROGUE?

Any way to check how RetroFW do it? It's a param which is sent to emulators?
Title: Re: RG350 "ROGUE" CFW
Post by: a330boy on March 17, 2020, 08:32:23 pm
@Ninoh-FOX Suggest you add scale mode that allows games display original, aspect, or stretch under Gmenu2x?
Are you talking about previews or emulators?

For emulators. I got idea from RetroFW 2.0. If only possible to do the same with ROGUE?

Any way to check how RetroFW do it? It's a param which is sent to emulators?

Correct. It's a parameter on every emulator under scale mode.
Title: Re: RG350 "ROGUE" CFW GeGeo NeoGeo Emulator Issue
Post by: fonzi on March 19, 2020, 10:49:13 am
Hi All,

Anyone have an issue getting GeGeo (NeoGeo Emulator) to run on 1.7.9.7 ?

It runs on 1.7.9.5 but same OPK file will not work... I have a custom version created with OPK Creator which will not even show when copied to apps, yet on older CFW versions it will show in the menu...

Strange, any ideas ?

Stock unchanged neogeo emu working fine for me on 1.7.9.7
Did you just try the stock one? (one you didnt change using OPK creator).
Worth a test.
Title: Re: RG350 "ROGUE" CFW
Post by: Ninoh-FOX on March 23, 2020, 11:44:23 am
new release, bros!!!
Title: Re: RG350 "ROGUE" CFW
Post by: ace9094 on March 23, 2020, 09:32:40 pm
new release, bros!!!

Installed yesterday thank you !!!

Could you please advise of two things - I have the update OPK however after the update has complete it does not show in the update manager... The list is completely empty...

1) Are the any instructions i should follow to uyse the manager ?
2)  Do the update files need to go in apps as normal or somewhere else ?

(Sorry if I missed this and has be answerd in a "read me" or something)

Thanks
ace
Title: Re: RG350 "ROGUE" CFW GeGeo NeoGeo Emulator Issue
Post by: ace9094 on March 23, 2020, 09:33:47 pm
Hi All,

Anyone have an issue getting GeGeo (NeoGeo Emulator) to run on 1.7.9.7 ?

It runs on 1.7.9.5 but same OPK file will not work... I have a custom version created with OPK Creator which will not even show when copied to apps, yet on older CFW versions it will show in the menu...

Strange, any ideas ?

Stock unchanged neogeo emu working fine for me on 1.7.9.7
Did you just try the stock one? (one you didnt change using OPK creator).
Worth a test.

Yeah.... Turns out it was me being stupid... I managed to get it going :) Thanks for the reply
Title: Re: RG350 "ROGUE" CFW
Post by: rafavico on March 23, 2020, 09:51:04 pm
new release, bros!!!

Installed yesterday thank you !!!

Could you please advise of two things - I have the update OPK however after the update has complete it does not show in the update manager... The list is completely empty...

1) Are the any instructions i should follow to uyse the manager ?
2)  Do the update files need to go in apps as normal or somewhere else ?

(Sorry if I missed this and has be answerd in a "read me" or something)

Thanks
ace
Update manager is to download updates from wifi or network, not opk files from sd. Do you have a compatible wifi stick?
Title: Re: RG350 "ROGUE" CFW
Post by: ace9094 on March 24, 2020, 02:54:44 am
new release, bros!!!

Installed yesterday thank you !!!

Could you please advise of two things - I have the update OPK however after the update has complete it does not show in the update manager... The list is completely empty...

1) Are the any instructions i should follow to uyse the manager ?
2)  Do the update files need to go in apps as normal or somewhere else ?

(Sorry if I missed this and has be answerd in a "read me" or something)

Thanks
ace
Update manager is to download updates from wifi or network, not opk files from sd. Do you have a compatible wifi stick?

 I do not, but do connect to my PC via FTP / Static IP - Can download the update files to my PC and point Update Manager to the local directory holding the updates on the PC ?
Title: Re: RG350 "ROGUE" CFW
Post by: ace9094 on March 24, 2020, 02:56:51 am
Hi Ninoh-Fox,

I see you release Choclate Doom for the RG350 -

Is it possible to release a version that can use the modifed WAD files like on RetroFW 2.1 ?

Here is the release by scooterpsu  that has the MOD files

https://github.com/scooterpsu/chocolate-doom-modlauncher/releases (https://github.com/scooterpsu/chocolate-doom-modlauncher/releases)
https://github.com/scooterpsu/czdoom/releases (https://github.com/scooterpsu/czdoom/releases)

Thanks
ace
Title: Re: RG350 "ROGUE" CFW
Post by: Ninoh-FOX on March 24, 2020, 10:02:36 am
I don't know, but I am port prboom+, not Chocolate version.
Title: Re: RG350 "ROGUE" CFW
Post by: rafavico on March 24, 2020, 10:05:17 am
new release, bros!!!

Installed yesterday thank you !!!

Could you please advise of two things - I have the update OPK however after the update has complete it does not show in the update manager... The list is completely empty...

1) Are the any instructions i should follow to uyse the manager ?
2)  Do the update files need to go in apps as normal or somewhere else ?

(Sorry if I missed this and has be answerd in a "read me" or something)

Thanks
ace
Update manager is to download updates from wifi or network, not opk files from sd. Do you have a compatible wifi stick?

 I do not, but do connect to my PC via FTP / Static IP - Can download the update files to my PC and point Update Manager to the local directory holding the updates on the PC ?

Is not possible for now. Update Manager is made to download updates from console and avoid using pc.
Title: Re: RG350 "ROGUE" CFW
Post by: Nikojiro on March 24, 2020, 02:22:44 pm
Just installed 1.7.9.8 update, flawless update from OPK. Preview opacity control in GMenux2x is a feature I've requested, and I thank you wholeheartedly to have included it!

Thank you very much to the whole team for the effort put in this great CFW, much appreciated!

Keep safe in these strange times  8)
Title: Re: RG350 "ROGUE" CFW
Post by: Nikojiro on March 24, 2020, 02:23:40 pm
---
Title: Re: RG350 "ROGUE" CFW
Post by: ace9094 on March 24, 2020, 06:31:11 pm
I don't know, but I am port prboom+, not Chocolate version.

Sorry my mistake, If you can make PR Boom run the Modified WADs that would be great
Title: Re: RG350 "ROGUE" CFW
Post by: Eliwood_san on March 25, 2020, 02:41:33 am
Hello @Ninoh-FOX  one question your firmware supports the Powkiddy Q90 console?
Title: Re: RG350 "ROGUE" CFW
Post by: ace9094 on March 25, 2020, 09:29:58 pm
Hello @Ninoh-FOX  one question your firmware supports the Powkiddy Q90 console?

I though the Powikiddy was a MiYoo Max/ Play Go 2 / Pocket GO 2 clone not RG350 ?

I could be wrong though
Title: Re: RG350 "ROGUE" CFW
Post by: Eliwood_san on March 26, 2020, 01:12:54 am
Hello @Ninoh-FOX  one question your firmware supports the Powkiddy Q90 console?

I though the Powikiddy was a MiYoo Max/ Play Go 2 / Pocket GO 2 clone not RG350 ?

I could be wrong though

Nope this powkiddy im talking about its totally different,its similar to the GCW Zero only they change some hardware parts.For example doesnt have hdmi,they have removable battery and you can access to the internal microsd

Have two loud speakers and mimics perfectly a nintendo Switch form

Here you can look it...Sorry if the video its in spanish language but you can have a general idea :

https://www.youtube.com/watch?v=uPmeYbNSOrU
Title: Re: RG350 "ROGUE" CFW
Post by: ace9094 on March 26, 2020, 04:57:29 am
Nope this powkiddy im talking about its totally different,its similar to the GCW Zero only they change some hardware parts.For example doesnt have hdmi,they have removable battery and you can access to the internal microsd

Have two loud speakers and mimics perfectly a nintendo Switch form

Here you can look it...Sorry if the video its in spanish language but you can have a general idea :

https://www.youtube.com/watch?v=uPmeYbNSOrU

According to a review by youtuber Taki Udon the Q90 is simular to the original v1 Pocket Go -
"PowKiddy's recent handheld is straight out of gen 1 with the exact same processor and software that was in the original Pocket Go. The PowKiddy Q90 "upgrades" the PG1 with a slightly bigger screen, better audio, and a usb type c port"

https://www.youtube.com/watch?v=vwIAF65OcVc

I wouldn't buy it if you think this is the same as a GCW0 unless yours is an upgraded version.
Title: Re: RG350 "ROGUE" CFW
Post by: Eliwood_san on March 26, 2020, 10:56:44 pm
Nope this powkiddy im talking about its totally different,its similar to the GCW Zero only they change some hardware parts.For example doesnt have hdmi,they have removable battery and you can access to the internal microsd

Have two loud speakers and mimics perfectly a nintendo Switch form

Here you can look it...Sorry if the video its in spanish language but you can have a general idea :

https://www.youtube.com/watch?v=uPmeYbNSOrU



According to a review by youtuber Taki Udon the Q90 is simular to the original v1 Pocket Go -
"PowKiddy's recent handheld is straight out of gen 1 with the exact same processor and software that was in the original Pocket Go. The PowKiddy Q90 "upgrades" the PG1 with a slightly bigger screen, better audio, and a usb type c port"

https://www.youtube.com/watch?v=vwIAF65OcVc

I wouldn't buy it if you think this is the same as a GCW0 unless yours is an upgraded version.

I know the powkiddy q90 have low ram compared to GCW Zero,but i compared them because dont have hdmi enabled.

Anyway i ask to nino-oh if their firmware support this device,i see in aliexpress have a good discount in my country.
Title: Re: RG350 "ROGUE" CFW
Post by: adsb on April 02, 2020, 03:45:21 pm
Just wanted to say thanks for all the hard work that is and has been going into the Rogue CFW.

No brainer not to use it as there are so many improvements over the OEM FW and great advancements like the WIFI updater.

Running the latest version 1.7.9.8 and no issues to report.

Thanks to everyone involved.
Title: Re: RG350 "ROGUE" CFW
Post by: jccweb on April 02, 2020, 10:18:13 pm
Will you add this version to PG2 as well?
Title: Re: RG350 "ROGUE" CFW
Post by: tophuntyer99 on April 06, 2020, 04:56:28 am
Does this firmware allow all Genesis games to play full screen?
Title: Re: RG350 "ROGUE" CFW
Post by: HercTNT on April 06, 2020, 08:16:40 am
Does this firmware allow all Genesis games to play full screen?
I could be wrong but isn't that up to the emulator and not the firmware? picodrive seems to run fine full screen.
Title: Re: RG350 "ROGUE" CFW
Post by: cauterize on April 23, 2020, 03:05:15 pm
Does this work with the RG350M? :)
Title: Re: RG350 "ROGUE" CFW
Post by: Hagane023 on April 25, 2020, 09:11:22 pm
Does this work with the RG350M? :)

I've not tried it, however if you do try it, the original base firmware for the rg350m cane be found here https://github.com/retrogamehandheld/rg350m/wiki/Firmware-and-software-updates
Don't bother with extending the partition with software (ext-4) just put the newly flashed card into the 350m and it'll sort it out. Just backup your opks and saves, to transfer over. The psx opk has a much newer date than most in it.
Title: Re: RG350 "ROGUE" CFW
Post by: Ninoh-FOX on April 26, 2020, 08:01:16 pm
Does this work with the RG350M? :)

no, because the version M has a diferent video driver kernel.

PD: new release
Title: Re: RG350 "ROGUE" CFW
Post by: a330boy on April 28, 2020, 06:56:57 pm
@Ninoh-FOX Suggest you add scale mode that allows games display original, aspect, or stretch under Gmenu2x?
Are you talking about previews or emulators?

For emulators. I got idea from RetroFW 2.0. If only possible to do the same with ROGUE?

Any way to check how RetroFW do it? It's a param which is sent to emulators?

Correct. It's a parameter on every emulator under scale mode.

@rafavico Will it be possible?
Title: Re: RG350 "ROGUE" CFW
Post by: rafavico on April 29, 2020, 09:22:36 pm
@Ninoh-FOX Suggest you add scale mode that allows games display original, aspect, or stretch under Gmenu2x?
Are you talking about previews or emulators?

For emulators. I got idea from RetroFW 2.0. If only possible to do the same with ROGUE?

Any way to check how RetroFW do it? It's a param which is sent to emulators?

Correct. It's a parameter on every emulator under scale mode.

@rafavico Will it be possible?
Don't look very much because I was coding the app store for last rogue's version.
Anyway, there are too much emulators, I don't think they share a parameter for that, there must be another way. If I find retrofw source code I'll take a look, maybe it's a setting wich works with specific cpus.
Title: Re: RG350 "ROGUE" CFW
Post by: evge-tlt on May 01, 2020, 03:39:55 pm
Hi!

I really like ROGUE 1.7.9.9 update. Thank you! But there are problems.

Screen flickering in Rogue Connect and the Rogue App Store. How do I solve this?

Display in Rogue Connect has always previously flickered too.

Flicker demonstration in this video (https://youtu.be/jTkYBGg8oxw)

Thanks.
Title: Re: RG350 "ROGUE" CFW
Post by: Bergq on May 01, 2020, 05:54:15 pm
Same issue here. And I have notified @Ninoh-FOX about it recently just to make the dev. aware of it.

I used the App store anyway and downloaded a lot. Afterwards my screen got bad leakage at the bottom of the screen. It got normal after some hours of cooling down and showing other things without flickering.
Title: Re: RG350 "ROGUE" CFW
Post by: evge-tlt on May 01, 2020, 06:04:22 pm
Yes. This may damage the display. So when the display starts to float at the bottom, I turn down the brightness and it saves the screen. "Power" - "Vol-"

This problem only appears in Rogue Connect and now in the Rogue App Store. Emulators, games, and other applications work without problems with the display.
Title: Re: RG350 "ROGUE" CFW
Post by: rafavico on May 01, 2020, 07:02:09 pm
@Bergq @evge-tlt how did you install rogue? clean install to empty sd? or update from stock firmware?
Title: Re: RG350 "ROGUE" CFW
Post by: evge-tlt on May 01, 2020, 07:23:36 pm
first there was flasher 1.7.9.1, then all the following versions were updated
Title: Re: RG350 "ROGUE" CFW
Post by: rafavico on May 01, 2020, 07:25:21 pm
first there was flasher 1.7.9.1, then all the following versions were updated
Ok, I'll check some things.
Title: Re: RG350 "ROGUE" CFW
Post by: Bergq on May 02, 2020, 09:31:45 pm
@Bergq @evge-tlt how did you install rogue? clean install to empty sd? or update from stock firmware?

Yes, I did a clean install to rouge for an older rouge version in the past. I have used the update opk to new version a couple of times since then.
Title: Re: RG350 "ROGUE" CFW
Post by: rafavico on May 02, 2020, 11:09:24 pm
@Bergq @evge-tlt can you try this version and check if it works whitout flickering? the app should show in applications menu.
rogueappstore_swdebug.opk (https://drive.google.com/file/d/1mO4qN_fWL9L9_KQi2orekZDNexuGDaRX/view)
Title: Re: RG350 "ROGUE" CFW
Post by: evge-tlt on May 03, 2020, 04:49:04 am
Hi! Thanks. But no change, the problem remains:

demo video 2 (https://youtu.be/m6wZ5FS_KlU)
Title: Re: RG350 "ROGUE" CFW
Post by: rafavico on May 03, 2020, 02:23:37 pm
@evge-tlt @Bergq please, try another one, I used an updated compiler. If this don't work we'll need to check in deep.

rogueappstore_swdebug.opk (https://drive.google.com/open?id=1mO4qN_fWL9L9_KQi2orekZDNexuGDaRX)
Title: Re: RG350 "ROGUE" CFW
Post by: evge-tlt on May 03, 2020, 03:05:17 pm
I tried the new debug opk, problem is not solved
Title: Re: RG350 "ROGUE" CFW
Post by: rafavico on May 03, 2020, 03:31:19 pm
ok, thank you for try it.
Title: Re: RG350 "ROGUE" CFW
Post by: AtomicHaggis on May 05, 2020, 06:08:43 pm
I am also experiencing the flickering issue on both the mentioned tools.  Before I realised, the rogue connect app caused damage that took 20 minutes to go away.  I am happy to test new versions or help with debugging.
Title: Re: RG350 "ROGUE" CFW
Post by: rafavico on May 05, 2020, 07:32:48 pm
I am also experiencing the flickering issue on both the mentioned tools.  Before I realised, the rogue connect app caused damage that took 20 minutes to go away.  I am happy to test new versions or help with debugging.

Don't know what the problem could be, all apps works well in my console and people didn't report this issues before (only 1 time).
Can you try my apps/games, all have same code base and compiler: the clock, update manager, scriptrunner, rg350test... and if you can, any of my games: Bathyscaphe, Escape from Minos, Ultratumba, Rock Rain 2, Rookie Hero.
If it is a SDL link problem, almost all of them shouls shows a similar flicker.
Title: Re: RG350 "ROGUE" CFW
Post by: evge-tlt on May 05, 2020, 07:42:01 pm
Periodically, but very rarely, the Rogue Connect app was launched without flickering. I could not understand why this sometimes happened.

games in the near future I will try
Title: Re: RG350 "ROGUE" CFW
Post by: evge-tlt on May 06, 2020, 05:51:16 am
Testing Rafa Vico games, Rogue Connect, Rogue App Store (https://youtu.be/k5APi1BxfSA)
Title: Re: RG350 "ROGUE" CFW
Post by: AtomicHaggis on May 06, 2020, 07:21:52 am
I discovered the flickering problem only happens if my RG350 is connected to my computer and charging via the right-side USB-C connector when I run those apps.  If it is not connected, I do not encounter the problem and ROGUE App Store and Connect are fine.
Title: Re: RG350 "ROGUE" CFW
Post by: rafavico on May 06, 2020, 07:58:18 pm
@evge-tlt @Bergq @AtomicHaggis Please, can you try this new version?
rogueappstore_swdebug.opk (version 1.0.1beta) (https://drive.google.com/file/d/1mO4qN_fWL9L9_KQi2orekZDNexuGDaRX/view?usp=sharing)

I changed screen deep to 16bits, this is the only app where I setted 32bits. Let's see what happens.
Thanks.
Title: Re: RG350 "ROGUE" CFW
Post by: evge-tlt on May 06, 2020, 08:16:05 pm
Rafa Vico thank you very much. Everything works (https://youtu.be/B0JfoGcJNEA). I hope the new Rogue Firmware will have a Rogue Update and App Store with a fix.
Title: Re: RG350 "ROGUE" CFW
Post by: rafavico on May 06, 2020, 08:45:21 pm
Very strange any consoles have problems with 32bit deep, anyway, at least we know where to search if there are anything more we didn't realize.
I'm happy it works, Rogue Connect must be easy to fix too.
Thank you for your tests.
Title: Re: RG350 "ROGUE" CFW
Post by: phil8715 on May 07, 2020, 09:29:20 pm
Mine is doing exactly the same. Flickering badly in GCW connect, Rogue Connect and in Rogue store. I think the device is starting to fail. I downloaded the update for the Rogue Store and that solved the screen flickering in the Rogue Store. However it still flickers in both Rogue Connect and GCW Connect.
Title: Re: RG350 "ROGUE" CFW
Post by: Bergq on May 08, 2020, 12:04:54 pm
@evge-tlt @Bergq @AtomicHaggis Please, can you try this new version?
rogueappstore_swdebug.opk (version 1.0.1beta) (https://drive.google.com/file/d/1mO4qN_fWL9L9_KQi2orekZDNexuGDaRX/view?usp=sharing)

I changed screen deep to 16bits, this is the only app where I setted 32bits. Let's see what happens.
Thanks.

Sorry for not testing sooner but it seem to be working fine with this new Beta version 1.0.1. Great job!

As I mentioned to Ninoh-FOX before (29th of April) ths issue seems to appear in other cases to. See my videos from not only the Connect app but in a Zelda game as well.

1. ROUGE Connect flickers.
https://www.dropbox.com/s/p59p03namy9z2fg/ROGUE%20Connect%202020-04-29%2015.08.11.mp4?dl=0

2.1 Zelda flickering
https://www.dropbox.com/s/holoqo1rc2iric3/ZeldaBad%202020-04-29%2015.12.04.mp4?dl=0

2.2 Zelda not flickering
https://www.dropbox.com/s/fyjkhg8t6q7j423/ZeldaFine%202020-04-29%2015.13.02.mp4?dl=0

(I will not have these in my Dropbox forever so please save them if you are in need of them.)
Title: Re: RG350 "ROGUE" CFW
Post by: pootle on May 08, 2020, 09:22:12 pm
I've been experiencing the exact same problem for quite a while now and it's only today I've found this thread.

Rogue connect flickers like mad and if you leave long enough it does goose your screen for quite a while before it recovers! I have my concerns that this will be doing some level of damage to the panel.

Rogue appstore does exactly the same as soon as the thumbnail image appears.

I've not seen it in other apps yet but these two 100% do what the videos have soon here.

Will there be a patched version of rogue connect and rogue appstore available soon?

Thanks for all your efforts.
Title: Re: RG350 "ROGUE" CFW
Post by: Bergq on May 09, 2020, 08:18:29 am
[...] Will there be a patched version of rogue connect and rogue appstore available soon?

Thanks for all your efforts.

Tried the new version of the store?

@evge-tlt @Bergq @AtomicHaggis Please, can you try this new version?
rogueappstore_swdebug.opk (version 1.0.1beta) (https://drive.google.com/file/d/1mO4qN_fWL9L9_KQi2orekZDNexuGDaRX/view?usp=sharing)

I changed screen deep to 16bits, this is the only app where I setted 32bits. Let's see what happens.
Thanks.
Title: Re: RG350 "ROGUE" CFW
Post by: pootle on May 09, 2020, 06:04:19 pm
Hi,

Just tried the new version of the app store and the flickering NO LONGER occurs on this version when the information images is selected!

Can I please ask for the same to be done to the rogue connect app as well and for them to both be made available either on the appstore via a new "apps" tab or get a bug fixed version of the firmware out at peoples earliest convenience! 

Thanks as always.

[...] Will there be a patched version of rogue connect and rogue appstore available soon?

Thanks for all your efforts.

Tried the new version of the store?

@evge-tlt @Bergq @AtomicHaggis Please, can you try this new version?
rogueappstore_swdebug.opk (version 1.0.1beta) (https://drive.google.com/file/d/1mO4qN_fWL9L9_KQi2orekZDNexuGDaRX/view?usp=sharing)

I changed screen deep to 16bits, this is the only app where I setted 32bits. Let's see what happens.
Thanks.
Title: Re: RG350 "ROGUE" CFW
Post by: rafavico on May 09, 2020, 11:09:17 pm
Don't worry, there will be an update with this fixed, anyway covid problem is delaying all work.
Thank you for testing. ;)
Title: Re: RG350 "ROGUE" CFW
Post by: pootle on May 10, 2020, 12:42:56 pm
Don't worry, there will be an update with this fixed, anyway covid problem is delaying all work.
Thank you for testing. ;)

Thats cool, totally understand. I'm available to do any additional testing with this unit if you need me to. I'd be interest in knowing if it's a hardware issue re: difference in panel manufacturer or a bug in a library. The fact you changing the depth from 32 to 16 is interesting.


Title: Re: RG350 "ROGUE" CFW
Post by: Ninoh-FOX on May 10, 2020, 05:57:32 pm
- 1.7.9.9R:

-Gmenu2-

1. Update GMENU2x, now it shows the internal language of the game, if it has it, according to the selected language.

2. Add Korean, Japanses and Chinese language.

3. fixed some missing texts.

4. Optimized themes, now overwrites system icons too.

5. Changed multi-language fonts to a much more comfortable one to read.

(https://raw.githubusercontent.com/Ninoh-FOX/POCKETGO2_ROGUE_CFW/master/screenshots/screenshot101.png)

(https://raw.githubusercontent.com/Ninoh-FOX/POCKETGO2_ROGUE_CFW/master/screenshots/screenshot102.png)

(https://raw.githubusercontent.com/Ninoh-FOX/POCKETGO2_ROGUE_CFW/master/screenshots/screenshot103.png)

(https://raw.githubusercontent.com/Ninoh-FOX/POCKETGO2_ROGUE_CFW/master/screenshots/screenshot104.png)

(https://raw.githubusercontent.com/Ninoh-FOX/POCKETGO2_ROGUE_CFW/master/screenshots/screenshot105.png)

(https://raw.githubusercontent.com/Ninoh-FOX/POCKETGO2_ROGUE_CFW/master/screenshots/screenshot106.png)


IMPORTANT: You have to delete the file /media/data/.linker so that all the changes are overwritten, otherwise there will be no opks that lose the name.

-Sound-

1. Now the volume of the headphones is also saved.

2. the Master volume control is now accessible from the SOUND MIXER, it is no longer necessary to modify the speaker to lower the volume.

-System-

1. Fixed APP's ROGUE problems with some screens, changed of 32Bpp to 16Bpp.

2. Optimized the clock of the GPU, now it is to the maximum recommended by the chip. (before 360Mhz, now 500Mhz)

3. Optimized the USB core, there will be no more random restarts when the console was disconnected from the computer.

You can see all the changes in the toolchain and kernel sections of my repositories
Title: Re: RG350 "ROGUE" CFW
Post by: Dr Smuckles on May 10, 2020, 11:10:33 pm
Can confirm Rogue Connect and Rogue App Store are both longer flickering!!!!!!


THANK YOU!!!!!!
Title: Re: RG350 "ROGUE" CFW
Post by: elea on May 11, 2020, 06:53:18 am
2. Optimized the clock of the GPU, now it is to the maximum recommended by the chip. (before 360Mhz, now 500Mhz)

Is "before 360Mhz, now 500Mhz" a typo? The commit says you boosted it from 500 to 560MHz

https://github.com/Ninoh-FOX/RG350_linux/commit/c93ad91138eed6705afa6b5396e5a69ba760e89b
Title: Re: RG350 "ROGUE" CFW
Post by: ruffnutts on May 11, 2020, 07:36:29 pm
Do you delete the .linker file before or after the update?
Title: Re: RG350 "ROGUE" CFW
Post by: rafavico on May 11, 2020, 11:13:06 pm
After update. But save themes if you have any installed.
Title: Re: RG350 "ROGUE" CFW
Post by: pcercuei on May 12, 2020, 02:35:32 pm
2. Optimized the clock of the GPU, now it is to the maximum recommended by the chip. (before 360Mhz, now 500Mhz)

Is "before 360Mhz, now 500Mhz" a typo? The commit says you boosted it from 500 to 560MHz

https://github.com/Ninoh-FOX/RG350_linux/commit/c93ad91138eed6705afa6b5396e5a69ba760e89b

The fun fact is, this will change absolutely nothing. The GPU clock is an integer divide of the PLL0 which is ~1 GHz. You can set that macro to 900 MHz, you'd still get 500 MHz for the GPU. So much for a "boost".
Title: Re: RG350 "ROGUE" CFW
Post by: RetroGamer666 on May 13, 2020, 03:39:04 pm
HI Ninoh-FOX!

I have an issue at getting your CFW to work on my new RG350M.

I am able to prepare the SD-Card but I after that it doesn't boot properly.
Could be a screen resolution problem. IDK, it stays black.

Either way I would appreciate if you could provide a solution to this.
If it is not intended to be used on a RG350M you should add a disclaimer on 1#Post.

Keep it up!

Thanks in advance

Greetings from Germany
Title: Re: RG350 "ROGUE" CFW
Post by: rafavico on May 13, 2020, 06:10:15 pm
This FW don't work in 350M, don't have the driver for that screen. Maybe in the future.
Title: Re: RG350 "ROGUE" CFW
Post by: Nikojiro on May 13, 2020, 08:45:18 pm
Maybe in the future.

It would be nice to have a compatibility for RG350M. I love Rogue on both PlayGo and RG350. I'd probably get a 350M if it gets Rogue  ;D
Title: Re: RG350 "ROGUE" CFW
Post by: elea on May 13, 2020, 09:35:14 pm
The driver for the 640x480 LCD (NV3052C) used in the RG350M is in TonyJih's github:
https://github.com/tonyjih/RG350_linux/commit/e1448818b3f630fbac72c10ae843213d4eb89c87#diff-26b7bb4118130545007897a557b9f930R92

Before the RG350M was released, someone else actually bought a compatible LCD from aliexpress, compiled the OS with the above commits and got it working. Nevertheless there have probably been unpublished display-related updates in the current RG350M OS.

Hope it gets open sourced!
Title: Re: RG350 "ROGUE" CFW
Post by: _cyrAx on May 14, 2020, 06:23:06 pm
I'm missing the 4x3 icon grill in the menus. The scaling makes everything looks kinda blurry where on 1.7.9.8 it was pixel perfect in the menus.

Title: Re: RG350 "ROGUE" CFW
Post by: Yan on May 15, 2020, 03:20:30 am
My RG350 froze when enabling WiFi adapter (Scan for APs). I am using the latest 1.7.9.9R. Fresh flashed to a 32GB tf card. Double checked MD5, which matched.
Title: Re: RG350 "ROGUE" CFW
Post by: goldmojo on May 15, 2020, 08:58:39 am
I'm missing the 4x3 icon grill in the menus. The scaling makes everything looks kinda blurry where on 1.7.9.8 it was pixel perfect in the menus.

If you re-install a gmenu 4x3 theme, everything should come back to normal.
Title: Re: RG350 "ROGUE" CFW
Post by: Rushy on May 16, 2020, 03:51:30 am
Any way to edit the boot logo?
Title: Re: RG350 "ROGUE" CFW
Post by: HercTNT on May 16, 2020, 06:40:38 am
I got the wlan adapter and managed to connect using rogue connect just once. after i did both the rogue appstore and rogue update were unable to see my wireless connection despite rogue connect saying i was. So i disconnected and tried to reconnect and was never able to get it to work again.

Also, users should definately apply the latest update to rogue. The flickering problem mentioned by others did a number on my lcd that took quite a while to go away. the update fixes this issue.
Title: Re: RG350 "ROGUE" CFW
Post by: _cyrAx on May 17, 2020, 12:35:54 am
I'm missing the 4x3 icon grill in the menus. The scaling makes everything looks kinda blurry where on 1.7.9.8 it was pixel perfect in the menus.

If you re-install a gmenu 4x3 theme, everything should come back to normal.

Thanks for the tip !

I also noticed a drop in performances while playing doom on odamex. Many stutters and sound bugs
Title: Re: RG350 "ROGUE" CFW
Post by: m4xx3d0ut on May 21, 2020, 06:37:37 pm
I updated from an older version of Rogue to the newest release and noticed I dont have the rogue app store and rogue connect is still labelled as GCW connect.  I saw the note on Github about deleting the .linker file, am I doing something wrong?
Title: Re: RG350 "ROGUE" CFW
Post by: phil8715 on May 22, 2020, 10:49:03 pm
Is there an issue with Rogue?

I installed 1.7.9.9 then the 1.7.9.9r on my RG-350 and it's causing the screen to go weird. I flashed back to stock and I'm not getting any problems with the screen.
Title: Re: RG350 "ROGUE" CFW
Post by: miroli on May 23, 2020, 01:42:25 pm
I am on 1.7.9.5. and no issues. Its stable, so no reason to upgrade for me.
Title: Re: RG350 "ROGUE" CFW
Post by: phil8715 on May 23, 2020, 02:20:59 pm
I wanted the Rogue connect so I can just plug in my WiFi dongle and download emulators or other stuff So it has to be on the most recent versions of Rogue. I don?t think 1.7.9.5 has the Rogue Connect.
Title: Re: RG350 "ROGUE" CFW
Post by: rafavico on May 23, 2020, 09:45:03 pm
Is there an issue with Rogue?

I installed 1.7.9.9 then the 1.7.9.9r on my RG-350 and it's causing the screen to go weird. I flashed back to stock and I'm not getting any problems with the screen.
Before 1.7.9.9r some people had problems with rogue connect, and rogue store, but that was fixed in this version.
Do you have problems only in that apps, or all system?
Did you installed 1.7.9.9 in an empty sd card? There are problems when updating from stock firmware.
Title: Re: RG350 "ROGUE" CFW
Post by: phil8715 on May 23, 2020, 10:30:34 pm
Yes I put it on a brand new fresh 32gb sd card.
Title: Re: RG350 "ROGUE" CFW
Post by: m4xx3d0ut on May 24, 2020, 12:58:45 am
I updated from an older version of Rogue to the newest release and noticed I dont have the rogue app store and rogue connect is still labelled as GCW connect.  I saw the note on Github about deleting the .linker file, am I doing something wrong?

so i flashed 1.7.9.9r to a new sd card, everything booted properly but it wouldn't recognize the emulators and some of the games on my external sd card.  has something changed here that i am not accounting for?
Title: Re: RG350 "ROGUE" CFW
Post by: Ninoh-FOX on May 26, 2020, 08:04:39 pm
I got the wlan adapter and managed to connect using rogue connect just once. after i did both the rogue appstore and rogue update were unable to see my wireless connection despite rogue connect saying i was. So i disconnected and tried to reconnect and was never able to get it to work again.

Also, users should definately apply the latest update to rogue. The flickering problem mentioned by others did a number on my lcd that took quite a while to go away. the update fixes this issue.

the better for this, and works for me, Is input manually the wifi dates and connect directly.

ah, new release. In the first post
Title: Re: RG350 "ROGUE" CFW
Post by: Bergq on May 27, 2020, 12:54:53 pm
Can any of you repeat these weird behaviors than I found?

Version: 1.7.9.9

1. Mad scrolling
 Video [326 MB]: https://drive.google.com/open?id=1KfD2zUR7PFGC48ORasNCylUBQlbk2fbi

2. Input fails if you adjusting brightness instead of only pressing Power.
  Video [108 MB]: https://drive.google.com/open?id=1Kvyrk0FWrk4taDvpW47BF4r-kbK10yFs

  Screen timeout: 3 sec
Title: Re: RG350 "ROGUE" CFW
Post by: _-Caleb-_ on May 27, 2020, 01:04:33 pm
Can any of you repeat these weird behaviors than I found?

Version: 1.7.9.9

1. Mad scrolling
 Video [326 MB]: https://drive.google.com/open?id=1KfD2zUR7PFGC48ORasNCylUBQlbk2fbi

2. Input fails if you adjusting brightness instead of only pressing Power.
  Video [108 MB]: https://drive.google.com/open?id=1Kvyrk0FWrk4taDvpW47BF4r-kbK10yFs

  Screen timeout: 3 sec

Hi!

About the first one, that happen in the base FW version (usually) and it's a problem of the inputtest app, for that reason (And much others hehhee) rogue use RG350TEST, the input program you're using are legacy versions of GCWZERO ...

The second i can't reproduce.

Seems like you've installed BASE under Rogue (Maybe for the HDMI use).

Regards!
Title: Re: RG350 "ROGUE" CFW
Post by: Bergq on May 29, 2020, 09:09:56 am
Can any of you repeat these weird behaviors than I found?

Version: 1.7.9.9

1. Mad scrolling
 Video [326 MB]: https://drive.google.com/open?id=1KfD2zUR7PFGC48ORasNCylUBQlbk2fbi

2. Input fails if you adjusting brightness instead of only pressing Power.
  Video [108 MB]: https://drive.google.com/open?id=1Kvyrk0FWrk4taDvpW47BF4r-kbK10yFs

  Screen timeout: 3 sec

Hi!

About the first one, that happen in the base FW version (usually) and it's a problem of the inputtest app, for that reason (And much others hehhee) rogue use RG350TEST, the input program you're using are legacy versions of GCWZERO ...

The second i can't reproduce.

Seems like you've installed BASE under Rogue (Maybe for the HDMI use).

Regards!

Thanks. The first one was minor, but good that we are aware of it. Nice!

For the second one
* My setup:
   I has not made any changes as of the HDMI functionality. Only updated the 1.7.9.8 to 1.7.9.9 with the update opk.
* Reproduce:
   Have you (1) waiting for the timeout to turn of the screen, and then (2) adjust the brightnes ("Power" + "Volume +") before you push the power (as it ment to)?

Title: Re: RG350 "ROGUE" CFW
Post by: _-Caleb-_ on May 29, 2020, 06:54:39 pm
Can any of you repeat these weird behaviors than I found?

Version: 1.7.9.9

1. Mad scrolling
 Video [326 MB]: https://drive.google.com/open?id=1KfD2zUR7PFGC48ORasNCylUBQlbk2fbi

2. Input fails if you adjusting brightness instead of only pressing Power.
  Video [108 MB]: https://drive.google.com/open?id=1Kvyrk0FWrk4taDvpW47BF4r-kbK10yFs

  Screen timeout: 3 sec

Hi!

About the first one, that happen in the base FW version (usually) and it's a problem of the inputtest app, for that reason (And much others hehhee) rogue use RG350TEST, the input program you're using are legacy versions of GCWZERO ...

The second i can't reproduce.

Seems like you've installed BASE under Rogue (Maybe for the HDMI use).

Regards!

Thanks. The first one was minor, but good that we are aware of it. Nice!

For the second one
* My setup:
   I has not made any changes as of the HDMI functionality. Only updated the 1.7.9.8 to 1.7.9.9 with the update opk.
* Reproduce:
   Have you (1) waiting for the timeout to turn of the screen, and then (2) adjust the brightnes ("Power" + "Volume +") before you push the power (as it ment to)?

Confirmes the second one, the Rogue team known this bug, if you press power again you can use the stick normally
Title: Re: RG350 "ROGUE" CFW
Post by: Digitalspirit on May 30, 2020, 11:50:42 am
I think the link on the first post for Update firmware 1.7.9.9Z needs amending as it's still pointing to 1.7.9.9R

https://github.com/Ninoh-FOX/RG350-ROGUE-CFW/releases/tag/1.7.9.9Z (https://github.com/Ninoh-FOX/RG350-ROGUE-CFW/releases/tag/1.7.9.9Z)

Will be giving this a try as soon as my replacement sdcard arrives  :)
Title: Re: RG350 "ROGUE" CFW
Post by: Darthbr on June 01, 2020, 12:56:07 am
Can u guys make a option to set "sharpness" by menu?

Cause everytime i set it by emulator, using "hardware" as scaling.. when i turn off The console i have to set sharpenss again.. Kinda boring... I dont think its dificulta cause i Love th brightness setting by menu.
Title: Re: RG350 "ROGUE" CFW
Post by: Pender666 on June 18, 2020, 12:46:46 pm
Hello, guys. Murat Erdem made a tutorial on Youtube showing how to install Rogue FW on RG350M. He made a custom vmlinuz.bin with the Display Drivers for the RG350M. It's only replace that file after flashing the latest ROGUE image (1.7.9.9Z) and you're done. Maybe it can be made official by the Dev Team.

The only issue I have is event log showing a lot of warnings about cpu scaling:

failed to open "sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq": no such file or directory
failed to open "sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq": no such file or directory

I tried to create those folders with no success, maybe the DEV could fix it someday.

Thanks for the hard work and I hpe to see the RG350M supported soon

https://www.youtube.com/watch?v=soazNSAwcQI

https://mega.nz/folder/r1NQUSBB#r3B22d6Do9YBpUNIs4jPKQ (https://mega.nz/folder/r1NQUSBB#r3B22d6Do9YBpUNIs4jPKQ)
Title: Re: RG350 "ROGUE" CFW
Post by: Nikojiro on June 24, 2020, 10:53:18 am
That's great news about the 350M!
Title: Re: RG350 "ROGUE" CFW
Post by: Ninoh-FOX on July 01, 2020, 05:21:42 pm
NEW RELEASE, INCLUDE M!!

Changelog:

- 1.7.10/M:

-gmenu2x-
Several changes have been added, including:

option to activate or deactivate analogs from settings.
option to change brightness
new theme in pixel mode (this does not support all fonts)
New way to monitor the battery.
the titles can now be read in two lines
there are more changes, but I don't remember them all XD
-kernel-

boot mode has been changed, now read mininit-syspart file from boot partition. This way you can update without having to recompile the kernel.

Added DRM drivers, in case one day the hdmi code for 3.12 comes out

cleaned unnecessary drivers.

gpu frequency corrected according to the cpu.

Battery capacity has been corrected.

-General-

Added support for RG350M
Added ROGUE Manual
Added news combo keys (see the manual)
Title: Re: RG350 "ROGUE" CFW
Post by: rafavico on July 01, 2020, 06:25:43 pm
With a new Pixel Theme.
Title: Re: RG350 "ROGUE" CFW
Post by: thelog on July 02, 2020, 08:48:14 am
NEW RELEASE, INCLUDE M!!


Added support for RG350M
Added ROGUE Manual
Added news combo keys (see the manual)

i flashed sd_image.bin but i only got black screen on my rg350m. Can you explain how to do it? I have to apply rg350m-update-1.7.10-2020-07-01.opk
  on the official firmware?!?!?
Title: Re: RG350 "ROGUE" CFW
Post by: rafavico on July 02, 2020, 09:08:31 am
i flashed sd_image.bin but i only got black screen on my rg350m. Can you explain how to do it? I have to apply rg350m-update-1.7.10-2020-07-01.opk
  on the official firmware?!?!?
Be sure you flash the image from RG350M firmware, it is tagged as 1.7.10M.
https://github.com/Ninoh-FOX/RG350-ROGUE-CFW/releases/tag/1.7.10M
Title: Re: RG350 "ROGUE" CFW
Post by: thelog on July 02, 2020, 02:13:31 pm

Be sure you flash the image from RG350M firmware, it is tagged as 1.7.10M.
https://github.com/Ninoh-FOX/RG350-ROGUE-CFW/releases/tag/1.7.10M
in my haste to test I had not noticed that it was not a single version but they were two specific versions. My mistake, thank you
Title: Re: RG350 "ROGUE" CFW
Post by: a330boy on July 02, 2020, 05:24:08 pm
How to revert to stock firmware without opening RG350?
Title: Re: RG350 "ROGUE" CFW
Post by: rafavico on July 02, 2020, 08:02:12 pm
I think the only option with stock firmware is to flash internal sd card.
Title: Re: RG350 "ROGUE" CFW
Post by: ncrouch142 on July 03, 2020, 04:45:49 pm
Has anyone tried using the opk update patch for HDMI and then applying the opk update for ROGUE to see if HDMI works after? I'm talking about the update that someone posted to YouTube back in May.
Title: Re: RG350 "ROGUE" CFW
Post by: fonzi on July 05, 2020, 12:02:28 am
Maybe this will help answer your question:

https://www.youtube.com/watch?v=KFRaO4X_10U
Title: Re: RG350 "ROGUE" CFW
Post by: Aljaz on July 08, 2020, 07:40:37 am
Hi There.

Running RG350M on Rogue CFW 1.7.10M and noticed some small issues. I think it's also present on the stock firmware. When running ports/homebrew after power on or reboot it occasionally gives me cracking and popping sounds, the game also runs super slow. I then have to quit the game and run it again and it stops. Happens on Chocolate Doom, Open Sonic, Streets of Rage Remake ect. The Emulators have no such problems except the Temeper Emulator (PCE) which also skips and has popping sound but can be fixed by restarting the emulator.

I've checked the log file and it repeatedly says ALSA lib pcm.c:8432:(snd_pcm_recover) underrun occurred.
After this the sound pops and crackles and the games runs slow.

Any solutions to this?

Thanks and keep up the good work!
Title: Re: RG350 "ROGUE" CFW
Post by: xb000x on July 08, 2020, 12:11:59 pm
There are 2 types Pops. hardware pops can't be fix with firmware alone. 1) hardware Speaker popping at Power on/off, open apps/emulators, volume up from 0 this can only be hardware fixed with adding capacitors to the speaker amps. https://www.reddit.com/r/RG350/comments/gxabok/rg350m_audio_pops/?sort=new
2) In game emulators popping/cracking sound/glitches are software/emulation problems thus need software/emulator fixes.
Title: Re: RG350 "ROGUE" CFW
Post by: Aljaz on July 08, 2020, 06:34:03 pm
To be clear, I am not talking about hardware pops, I am talking about software bugs. The cracking happens only ocasionaly followed by errors in the log file and only in games not emus. Sometimes it?s fine (clear sound) and sometimes it isn?t... Mekes me wonder if it has somethink to do with the audio drivers. I found this: https://bbs.archlinux.org/viewtopic.php?id=185736
Title: Re: RG350 "ROGUE" CFW
Post by: elea on July 08, 2020, 09:11:44 pm
@xb000x the JZ4770 has a completely separate audio output for the headphones that doesn't go through any opamp circuit - just an AC-decoupling capacitor.

In your reddit post, you wrote: "The in-game D/A audio chip turn on/off pops are heard AND doesn't affect the headphone amp, headphone still pops everything."

This is clearly a software problem: I bet when headphone pops are eliminated by fixing the driver, then the speaker ones will also go away.

Title: Re: RG350 "ROGUE" CFW
Post by: Nikojiro on July 10, 2020, 09:37:05 pm
Hi, congratulations on supporting RG350M!

However I've found an issue with PCSX4all and hardware scaling (also reported here https://boards.dingoonity.org/retro-game-350rg-350/pcsx4all-hardware-scaling-issue (https://boards.dingoonity.org/retro-game-350rg-350/pcsx4all-hardware-scaling-issue)). On some titles (in my experience I've had it with Grandia and The legend of Dragoon), the picture will not fill the whole screen, you get vertical black bars on both sides.

It does happen with stock firmware too... but not on the regular RG350 (tested on Rogue 1.7.10).
Title: Re: RG350 "ROGUE" CFW
Post by: Nikojiro on July 10, 2020, 10:58:23 pm
Well, I've ran into more hardware scaling issues.

Fceux "FS smooth" scaling is completely messed up.

Fullscreen scaling on Neogeo games in FBA has issues also, some weird glitchy vertical bar on the right side of the screen.

So far unfortunately I'm kind of disappointed with the RG350M. This higher res screen brings too many issues.

I might return it...
Title: Re: RG350 "ROGUE" CFW
Post by: fonzi on July 12, 2020, 08:33:11 am
Request to Ninoh-FOX for an addition to future firmware update.
Since you've added a brightness setting within settings how about adding the sharpness setting as well?
Title: Re: RG350 "ROGUE" CFW
Post by: goldmojo on July 14, 2020, 05:15:57 pm
Is it possible upgrade toolchain gcc version from 4.9 to 6+ of your firmware. Because some project like EasyRPG player start using C++14 as baseline, which is not support by gcc 4.9. And gcc 5+ have different ABI, new program compile by g++ 5+ can not using  firmware's gcc 4.9 version stdc++ share library.
Hello Ninoh-FOX,

I am also interested by such a gcc upgrade to gcc 6.
Is it in your roadmap ?

Regards.
Title: Re: RG350 "ROGUE" CFW
Post by: elea on July 15, 2020, 09:00:39 pm
@goldmojo this new version of buildroot uses gcc10: https://github.com/WerWolv/rg350_buildroot_gcc10
Title: Re: RG350 "ROGUE" CFW
Post by: goldmojo on July 16, 2020, 07:31:59 pm
@goldmojo this new version of buildroot uses gcc10: https://github.com/WerWolv/rg350_buildroot_gcc10
Thank you Elea, I will go for it  :)
Title: Re: RG350 "ROGUE" CFW
Post by: Panja on July 24, 2020, 03:47:16 pm
Any one know if Rogue is compatible with the new RG350P?
Title: Re: RG350 "ROGUE" CFW
Post by: Nikojiro on July 27, 2020, 09:26:00 am
Any one know if Rogue is compatible with the new RG350P?

I'm interested to know as well.

I returned my RG350M due to hardware scaling bugs that bothered me (on both stock and RetroFW), not present on my regular RG350 (which thankfully I kept).

So since the RG350P has a 320x240 screen, it might very well be the best of both worlds.
Title: Re: RG350 "ROGUE" CFW
Post by: Panja on July 31, 2020, 03:15:19 pm
Just got my RG350P delivered!
Flashed Rogue 1.7.10 (RG350 edition) on a clean 64GB SD card and it seems to be working without problems.
Key mappings are ok, tried that with "RG350 test app".
Attaching the RG350P to the PC with the supplied cable and the network app works as well (needed the RG350-signed_driver though).
Title: Re: RG350 "ROGUE" CFW
Post by: Nikojiro on August 08, 2020, 09:11:43 pm
Great news. I'm gonna order one then.
Title: Re: RG350 "ROGUE" CFW
Post by: a330boy on August 11, 2020, 09:44:39 pm
@Ninoh-FOX could you offer more skins, please?
Title: Re: RG350 "ROGUE" CFW
Post by: Nikojiro on August 13, 2020, 09:32:26 pm
There are some additional skins floating around on Dingoonity, and it's not that complicated to make your own if you want something unique  ;)
Title: Re: RG350 "ROGUE" CFW
Post by: FireGate_13 on September 22, 2020, 07:59:40 pm
Have the development of rogue firmware stopped? I really love this machine and I enjoy every new feature you bring! Thank you for everything so far... Keep up the good work!
Title: Re: RG350 "ROGUE" CFW
Post by: ace9094 on September 23, 2020, 10:54:27 pm
Have the development of rogue firmware stopped? I really love this machine and I enjoy every new feature you bring! Thank you for everything so far... Keep up the good work!

I wondered if development had stopped also, the best CFW for RG350 & PG2... Hopefully Ninoh-Fox will release another version or two ;)
Title: Re: RG350 "ROGUE" CFW
Post by: Drumaster on October 01, 2020, 04:56:00 pm
@Ninoh-FOX Bug report (we cannot report bugs on the git repo):

Hardware: RG350P
Rogue version: 1.7.10

The followig issue is not fixed: "Fixed slowdowns and stuttering during first 15 minutes after first boot."
That still happens during 15 minutes after fresh install from sd_image.bin file in 1.7.10.

I was afraid my device was faulty at the beginning, fortunately I waited a bit and now it works flawlessly. :)

By the way, this bug does not occur on PocketGo2 v2 Rogue version 1.0.9.

Thanks for this amazing FW by the way.

Title: Re: RG350 "ROGUE" CFW
Post by: Postalsk8 on November 19, 2020, 08:17:55 pm
Hi, guys) Need your help. Maybe anyone knows how to delete stock wallpapers and apps (pixel-fixer, for example)? I find walls in gmenu2x folder (usr/share), but i can`t delete it, seems in 1.7.10 fw it system files now
Title: Re: RG350 "ROGUE" CFW
Post by: Xaijiqq on December 12, 2020, 07:17:03 pm
recently got the RG350P does this fix the audio pop problem when entering an emulator or game?  or was it a capacitor issue?  the original RG350 using stock firmware does not have the problem
Title: Re: RG350 "ROGUE" CFW
Post by: Ninoh-FOX on December 25, 2020, 12:35:23 am
new update for M and P, fixed grafics FBA, NEOGEO and NGP
Title: Re: RG350 "ROGUE" CFW
Post by: FireGate_13 on December 28, 2020, 07:39:42 am
omg! thank you for the new version! Are you still working for the goals of the project?
Title: Re: RG350 "ROGUE" CFW
Post by: JTSilius on December 28, 2020, 09:08:16 pm
recently got the RG350P does this fix the audio pop problem when entering an emulator or game?  or was it a capacitor issue?  the original RG350 using stock firmware does not have the problem

I was wondering the same... The audio pops on my 350M are even there during gameplay...
Title: Re: RG350 "ROGUE" CFW
Post by: Ninoh-FOX on January 10, 2021, 08:32:04 am
NEW UPDATE

https://github.com/Ninoh-FOX/RG350-ROGUE-CFW/releases/tag/1.7.10u2

https://github.com/Ninoh-FOX/RG350-ROGUE-CFW/releases/tag/1.7.11u2M

updated alsalib to version 1.2.4
updated alsamixer to version 1.1.7
add libpng 16 from OD
fixed sound mute level in pcm
fixed sound crashes in some emulators (you have to delete the old temper settings from the folder /usr/local/home/.temper/config/)
updated Picodrive emulator to 1.97 https://github.com/irixxxx/picodrive
recompiled Temper 1.24.2 https://github.com/gameblabla/temper/tree/f3328369d5e00e70b9c2ea095e09b1dec6452de5
updated pr-boom+ to OD-pr-boom+

note: if you prefer to flash the microsd directly you just have to extract the sd_image.bin from the rg350-flasher-1.7.10u2-2021-01-10.opk file
Title: Re: RG350 "ROGUE" CFW
Post by: goodfodder on January 10, 2021, 12:02:30 pm
NEW UPDATE

https://github.com/Ninoh-FOX/RG350-ROGUE-CFW/releases/tag/1.7.10u2

https://github.com/Ninoh-FOX/RG350-ROGUE-CFW/releases/tag/1.7.11u2M

updated alsalib to version 1.2.4
updated alsamixer to version 1.1.7
add libpng 16 from OD
fixed sound mute level in pcm
fixed sound crashes in some emulators (you have to delete the old temper settings from the folder /usr/local/home/.temper/config/)
updated Picodrive emulator to 1.97 https://github.com/irixxxx/picodrive
recompiled Temper 1.24.2 https://github.com/gameblabla/temper/tree/f3328369d5e00e70b9c2ea095e09b1dec6452de5
updated pr-boom+ to OD-pr-boom+

note: if you prefer to flash the microsd directly you just have to extract the sd_image.bin from the rg350-flasher-1.7.10u2-2021-01-10.opk file

Super, good to know your still developing, thanks for your hard work
Title: Re: RG350 "ROGUE" CFW
Post by: evertonsteve on January 12, 2021, 04:13:53 pm
sorry to ask though i cannot find the rogue store in this
Title: Re: RG350 &quot;ROGUE&quot; CFW
Post by: _-Caleb-_ on January 12, 2021, 09:34:01 pm
In settings. You need use a Wi-Fi dongle for download/update the apps

Enviado desde mi dandelion mediante Tapatalk

Title: Re: RG350 "ROGUE" CFW
Post by: Drumaster on January 28, 2021, 10:21:14 pm
@Ninoh-FOX Last Rogue FW 1.7.10u2 for RG350 is in fact for RG350M, resolution is 4 times higher so we only see 1/4 of the screen (everything is zoomed 4 times).

I extracted "sd_image.bin" from "rg350-flasher-1.7.10u2-2021-01-10.opk" here:
https://github.com/Ninoh-FOX/RG350-ROGUE-CFW/releases/tag/1.7.10u2

Also, that would be REALLY nice if you could bring back the possibility to turn off screen brightness when setting it at its minimum like with stock FW. That way we could save battery when listening to our favorite tunes in emulators for example. :)
Title: Re: RG350 "ROGUE" CFW
Post by: Ninoh-FOX on January 29, 2021, 06:22:26 am
@Ninoh-FOX Last Rogue FW 1.7.10u2 for RG350 is in fact for RG350M, resolution is 4 times higher so we only see 1/4 of the screen (everything is zoomed 4 times).

I extracted "sd_image.bin" from "rg350-flasher-1.7.10u2-2021-01-10.opk" here:
https://github.com/Ninoh-FOX/RG350-ROGUE-CFW/releases/tag/1.7.10u2

Oh, thanks, fixed
Title: Re: RG350 "ROGUE" CFW
Post by: Drumaster on January 29, 2021, 10:13:45 am
Thanks, now works as expected!
Title: Re: RG350 "ROGUE" CFW
Post by: Drumaster on January 29, 2021, 10:41:58 am
Also, is there a way to keep the left analog stick deactivated after a reboot (by tweaking a config file maybe?) without having to disable it each time? I mean we can keep it deactivated in GMenu2X with a setting but not through other apps, we have to press the combo key at each reboot.
Title: Re: RG350 "ROGUE" CFW
Post by: Ninoh-FOX on January 30, 2021, 08:44:11 am
Also, is there a way to keep the left analog stick deactivated after a reboot (by tweaking a config file maybe?) without having to disable it each time? I mean we can keep it deactivated in GMenu2X with a setting but not through other apps, we have to press the combo key at each reboot.

That is normal, because not all emulators has stick mapped, so you use the swaper dpad-stick, is nornal that this return to normal mode when you reboot the console.
Title: Re: RG350 "ROGUE" CFW
Post by: Ninoh-FOX on January 30, 2021, 08:50:33 am
@Ninoh-FOX Last Rogue FW 1.7.10u2 for RG350 is in fact for RG350M, resolution is 4 times higher so we only see 1/4 of the screen (everything is zoomed 4 times).

I extracted "sd_image.bin" from "rg350-flasher-1.7.10u2-2021-01-10.opk" here:
https://github.com/Ninoh-FOX/RG350-ROGUE-CFW/releases/tag/1.7.10u2

Also, that would be REALLY nice if you could bring back the possibility to turn off screen brightness when setting it at its minimum like with stock FW. That way we could save battery when listening to our favorite tunes in emulators for example. :)

I am disabled the 0 valor brightness because this not work fine when you turn on the screen again, go to 0% level to 100% level in one step.

Anyway, this not is good for RG350M screens.
Title: Re: RG350 "ROGUE" CFW
Post by: Drumaster on January 31, 2021, 10:00:43 am
That is normal, because not all emulators has stick mapped, so you use the swaper dpad-stick, is nornal that this return to normal mode when you reboot the console.
I don't see the point of not proposing an option to keep it deactivated after a reboot. The user will still be able to activate it with the combo key. That's just that it will be deactivated by default on boot instead of being activated.

I am disabled the 0 valor brightness because this not work fine when you turn on the screen again, go to 0% level to 100% level in one step.

Anyway, this not is good for RG350M screens.
Really? How can it damage RG350M screen? Why can we turn off the screen in GMenu2X and turn it on again at will?

Anyway, thanks for the hard work on this amazing FW. :)
Title: Re: RG350 "ROGUE" CFW
Post by: Ninoh-FOX on February 04, 2021, 10:17:27 pm
NEW UPDATES!!!

https://github.com/Ninoh-FOX/RG350-ROGUE-CFW/releases/

That is normal, because not all emulators has stick mapped, so you use the swaper dpad-stick, is nornal that this return to normal mode when you reboot the console.
I don't see the point of not proposing an option to keep it deactivated after a reboot. The user will still be able to activate it with the combo key. That's just that it will be deactivated by default on boot instead of being activated.

I am disabled the 0 valor brightness because this not work fine when you turn on the screen again, go to 0% level to 100% level in one step.

Anyway, this not is good for RG350M screens.
Really? How can it damage RG350M screen? Why can we turn off the screen in GMenu2X and turn it on again at will?

Anyway, thanks for the hard work on this amazing FW. :)

I don't know what is the problem of rg350m screen, so I can't fix this
Title: Re: RG350 "ROGUE" CFW
Post by: FireGate_13 on March 18, 2021, 02:35:12 pm
I chose this firmware because I believed in your work. And I thank you for all that you have done till now. I am just wondering.. will you continue pursuing the other goals of rogue firmware? Will you update it to the latest 3d drivers? will you add support for hdmi ? I want to believe..
Title: Re: RG350 "ROGUE" CFW
Post by: SML on May 05, 2021, 04:56:46 pm
I'm finding it very convenient to use the App Store to manage packages on my 350m and 280m. Will the official Retroarch releases be added to the repository?
Title: Re: RG350 "ROGUE" CFW
Post by: daddylonglegs on May 05, 2021, 08:03:11 pm
Thanks so much for this firmware, OP! I just donated as a small token of gratitude.

The only question I have is: on my 350P, holding power and pressing the d pad up and down does not seem to adjust the sharpness at all. Am I doing something wrong?

Also I noticed that all my SNES games now run at 60 FPS! A lot of them used to only run at 53 FPS or so. Is this because your OS is more optimized? Or is it because some sort of overclock is running?

Is the overclock dangerous at all? I already had another RG-350P fail on me (the screen would go crazy and it would randomly reboot). I just wanted to make sure it's not going to overheat or something! :)
Title: Re: RG350 "ROGUE" CFW
Post by: renejr902 on June 09, 2021, 08:17:57 am
Hi Nioh Fox. I just PM you about low color saturation on the RG350M and i just made a new topic about that, i searching a way to get a higher color saturation on this device, maybe in firmware. Thanks to you Nioh Fox and thanks to any guys that have a idea.