• HomeBoards
  • RulesRules
  • HelpHelp
  • WikiWiki
  • Donate

Author Topic: RG350 "ROGUE" CFW  (Read 120773 times)

Nikojiro

  • Posts: 253
Re: RG350 "ROGUE" CFW
« Reply #300 on: June 24, 2020, 10:53:18 am »
That's great news about the 350M!

Ninoh-FOX (OP)

  • Posts: 128
Re: RG350 "ROGUE" CFW
« Reply #301 on: July 01, 2020, 05:21:42 pm »
NEW RELEASE, INCLUDE M!!

Changelog:

- 1.7.10/M:

-gmenu2x-
Several changes have been added, including:

option to activate or deactivate analogs from settings.
option to change brightness
new theme in pixel mode (this does not support all fonts)
New way to monitor the battery.
the titles can now be read in two lines
there are more changes, but I don't remember them all XD
-kernel-

boot mode has been changed, now read mininit-syspart file from boot partition. This way you can update without having to recompile the kernel.

Added DRM drivers, in case one day the hdmi code for 3.12 comes out

cleaned unnecessary drivers.

gpu frequency corrected according to the cpu.

Battery capacity has been corrected.

-General-

Added support for RG350M
Added ROGUE Manual
Added news combo keys (see the manual)
« Last Edit: July 01, 2020, 11:03:48 pm by Ninoh-FOX »

rafavico

  • Posts: 55
    • Videogames by Rafa Vico
Re: RG350 "ROGUE" CFW
« Reply #302 on: July 01, 2020, 06:25:43 pm »
With a new Pixel Theme.

thelog

  • Posts: 3
Re: RG350 "ROGUE" CFW
« Reply #303 on: July 02, 2020, 08:48:14 am »
NEW RELEASE, INCLUDE M!!


Added support for RG350M
Added ROGUE Manual
Added news combo keys (see the manual)

i flashed sd_image.bin but i only got black screen on my rg350m. Can you explain how to do it? I have to apply rg350m-update-1.7.10-2020-07-01.opk
  on the official firmware?!?!?

rafavico

  • Posts: 55
    • Videogames by Rafa Vico
Re: RG350 "ROGUE" CFW
« Reply #304 on: July 02, 2020, 09:08:31 am »
i flashed sd_image.bin but i only got black screen on my rg350m. Can you explain how to do it? I have to apply rg350m-update-1.7.10-2020-07-01.opk
  on the official firmware?!?!?
Be sure you flash the image from RG350M firmware, it is tagged as 1.7.10M.
https://github.com/Ninoh-FOX/RG350-ROGUE-CFW/releases/tag/1.7.10M

thelog

  • Posts: 3
Re: RG350 "ROGUE" CFW
« Reply #305 on: July 02, 2020, 02:13:31 pm »

Be sure you flash the image from RG350M firmware, it is tagged as 1.7.10M.
https://github.com/Ninoh-FOX/RG350-ROGUE-CFW/releases/tag/1.7.10M
in my haste to test I had not noticed that it was not a single version but they were two specific versions. My mistake, thank you

a330boy

  • Posts: 186
Re: RG350 "ROGUE" CFW
« Reply #306 on: July 02, 2020, 05:24:08 pm »
How to revert to stock firmware without opening RG350?

rafavico

  • Posts: 55
    • Videogames by Rafa Vico
Re: RG350 "ROGUE" CFW
« Reply #307 on: July 02, 2020, 08:02:12 pm »
I think the only option with stock firmware is to flash internal sd card.

ncrouch142

  • Posts: 1
Re: RG350 "ROGUE" CFW
« Reply #308 on: July 03, 2020, 04:45:49 pm »
Has anyone tried using the opk update patch for HDMI and then applying the opk update for ROGUE to see if HDMI works after? I'm talking about the update that someone posted to YouTube back in May.
« Last Edit: July 03, 2020, 04:47:21 pm by ncrouch142 »

fonzi

  • Posts: 48
Re: RG350 "ROGUE" CFW
« Reply #309 on: July 05, 2020, 12:02:28 am »
Maybe this will help answer your question:

<a href="https://www.youtube.com/watch?v=KFRaO4X_10U" target="_blank">https://www.youtube.com/watch?v=KFRaO4X_10U</a>

Aljaz

  • Posts: 4
Re: RG350 "ROGUE" CFW
« Reply #310 on: July 08, 2020, 07:40:37 am »
Hi There.

Running RG350M on Rogue CFW 1.7.10M and noticed some small issues. I think it's also present on the stock firmware. When running ports/homebrew after power on or reboot it occasionally gives me cracking and popping sounds, the game also runs super slow. I then have to quit the game and run it again and it stops. Happens on Chocolate Doom, Open Sonic, Streets of Rage Remake ect. The Emulators have no such problems except the Temeper Emulator (PCE) which also skips and has popping sound but can be fixed by restarting the emulator.

I've checked the log file and it repeatedly says ALSA lib pcm.c:8432:(snd_pcm_recover) underrun occurred.
After this the sound pops and crackles and the games runs slow.

Any solutions to this?

Thanks and keep up the good work!
« Last Edit: July 08, 2020, 07:45:32 am by Aljaz »

xb000x

  • Posts: 1
Re: RG350 "ROGUE" CFW
« Reply #311 on: July 08, 2020, 12:11:59 pm »
There are 2 types Pops. hardware pops can't be fix with firmware alone. 1) hardware Speaker popping at Power on/off, open apps/emulators, volume up from 0 this can only be hardware fixed with adding capacitors to the speaker amps. https://www.reddit.com/r/RG350/comments/gxabok/rg350m_audio_pops/?sort=new
2) In game emulators popping/cracking sound/glitches are software/emulation problems thus need software/emulator fixes.

Aljaz

  • Posts: 4
Re: RG350 "ROGUE" CFW
« Reply #312 on: July 08, 2020, 06:34:03 pm »
To be clear, I am not talking about hardware pops, I am talking about software bugs. The cracking happens only ocasionaly followed by errors in the log file and only in games not emus. Sometimes it?s fine (clear sound) and sometimes it isn?t... Mekes me wonder if it has somethink to do with the audio drivers. I found this: https://bbs.archlinux.org/viewtopic.php?id=185736

elea

  • Posts: 63
Re: RG350 "ROGUE" CFW
« Reply #313 on: July 08, 2020, 09:11:44 pm »
@xb000x the JZ4770 has a completely separate audio output for the headphones that doesn't go through any opamp circuit - just an AC-decoupling capacitor.

In your reddit post, you wrote: "The in-game D/A audio chip turn on/off pops are heard AND doesn't affect the headphone amp, headphone still pops everything."

This is clearly a software problem: I bet when headphone pops are eliminated by fixing the driver, then the speaker ones will also go away.


Nikojiro

  • Posts: 253
Re: RG350 "ROGUE" CFW
« Reply #314 on: July 10, 2020, 09:37:05 pm »
Hi, congratulations on supporting RG350M!

However I've found an issue with PCSX4all and hardware scaling (also reported here https://boards.dingoonity.org/retro-game-350rg-350/pcsx4all-hardware-scaling-issue). On some titles (in my experience I've had it with Grandia and The legend of Dragoon), the picture will not fill the whole screen, you get vertical black bars on both sides.

It does happen with stock firmware too... but not on the regular RG350 (tested on Rogue 1.7.10).

Nikojiro

  • Posts: 253
Re: RG350 "ROGUE" CFW
« Reply #315 on: July 10, 2020, 10:58:23 pm »
Well, I've ran into more hardware scaling issues.

Fceux "FS smooth" scaling is completely messed up.

Fullscreen scaling on Neogeo games in FBA has issues also, some weird glitchy vertical bar on the right side of the screen.

So far unfortunately I'm kind of disappointed with the RG350M. This higher res screen brings too many issues.

I might return it...

fonzi

  • Posts: 48
Re: RG350 "ROGUE" CFW
« Reply #316 on: July 12, 2020, 08:33:11 am »
Request to Ninoh-FOX for an addition to future firmware update.
Since you've added a brightness setting within settings how about adding the sharpness setting as well?

goldmojo

  • Posts: 60
Re: RG350 "ROGUE" CFW
« Reply #317 on: July 14, 2020, 05:15:57 pm »
Is it possible upgrade toolchain gcc version from 4.9 to 6+ of your firmware. Because some project like EasyRPG player start using C++14 as baseline, which is not support by gcc 4.9. And gcc 5+ have different ABI, new program compile by g++ 5+ can not using  firmware's gcc 4.9 version stdc++ share library.
Hello Ninoh-FOX,

I am also interested by such a gcc upgrade to gcc 6.
Is it in your roadmap ?

Regards.

elea

  • Posts: 63
Re: RG350 "ROGUE" CFW
« Reply #318 on: July 15, 2020, 09:00:39 pm »
@goldmojo this new version of buildroot uses gcc10: https://github.com/WerWolv/rg350_buildroot_gcc10

goldmojo

  • Posts: 60
Re: RG350 "ROGUE" CFW
« Reply #319 on: July 16, 2020, 07:31:59 pm »
@goldmojo this new version of buildroot uses gcc10: https://github.com/WerWolv/rg350_buildroot_gcc10
Thank you Elea, I will go for it  :)

 

Post a new topic