Author Topic: RG350 "ROGUE" CFW  (Read 84297 times)

pcercuei

  • Posts: 1676
    • My devblog
Re: RG350 "ROGUE" CFW
« Reply #160 on: January 15, 2020, 07:19:17 pm »
Hello @pcercuei mmmm i thought in the kickstarter project one of their goals reached have otg enabled....so you are saying the GCW Zero it cant use the OTG function?Dont get me wrong,only asking if its possibe...if not i will understand it :(
OTG (On-The-Go) means that the same USB port can act either as device (you plug it to a PC) or host (you plug USB devices to it). The RG350 does *not* support OTG, and it doesn't need to, because it supports USB device on USB2 and USB host on USB1.

OTG was never enabled on the GCW Zero because it could damage the hardware. Under some obscure conditions the "host mode" detection mechanism would irremediably fry, causing the Zero to always believe that a USB device is plugged, and therefore leading to the impossibility to connect the Zero to a PC anymore again.

Ninoh-FOX (OP)

  • Posts: 104
Re: RG350 "ROGUE" CFW
« Reply #161 on: January 16, 2020, 06:12:12 am »
Hi !

Does anyone tried to use EmulationStation with ROGUE ?

I have the error "Could not initialize OpenGL" when I try to launch it.

This weekend I go to make a release that fix this.

GenGT

  • Posts: 1
Re: RG350 "ROGUE" CFW
« Reply #162 on: January 17, 2020, 04:06:49 pm »
Hi !

Does anyone tried to use EmulationStation with ROGUE ?

I have the error "Could not initialize OpenGL" when I try to launch it.

This weekend I go to make a release that fix this.

Hi Nino, thanks for this firmware! I have the same problem. This fix will be wonderful
Gracias por adelantado

Ninoh-FOX (OP)

  • Posts: 104
Re: RG350 "ROGUE" CFW
« Reply #163 on: January 18, 2020, 04:21:19 pm »
New update with FIXERS!!!

Selven

  • Posts: 12
Re: RG350 "ROGUE" CFW
« Reply #164 on: January 18, 2020, 06:22:18 pm »
thx

Stoofa

  • Posts: 21
Re: RG350 "ROGUE" CFW
« Reply #165 on: January 20, 2020, 09:16:26 am »
New update with FIXERS!!!

Great work mate

rafavico

  • Posts: 54
    • Videogames by Rafa Vico
Re: RG350 "ROGUE" CFW
« Reply #166 on: January 21, 2020, 04:17:20 pm »
@Selven if you want translate some texts to italian, you can check the project files and submit translations. Feel free to make any suggestion. Gmenu2x texts are at:
https://github.com/Ninoh-FOX/toolchain/tree/master/gmenu2x/data

pyke

  • Posts: 1
Re: RG350 "ROGUE" CFW
« Reply #167 on: January 25, 2020, 11:03:44 pm »
oh!  I didn't know I had a gun partner here, regards comrade!  8)


Thank you for your service, sir.

Selven

  • Posts: 12
Re: RG350 "ROGUE" CFW
« Reply #168 on: January 26, 2020, 06:11:57 pm »
hi @rafavico i just found the file and tried to translate, but gmenu2x not translate the interface, it translate only it's thing, but all the link created not get the translation

rafavico

  • Posts: 54
    • Videogames by Rafa Vico
Re: RG350 "ROGUE" CFW
« Reply #169 on: January 26, 2020, 10:18:10 pm »
@Selven what messages did you try to translate? I think some gmenu2x messages don't call to translate function and have to be fixed.

fillyfloater

  • Posts: 1
Re: RG350 "ROGUE" CFW
« Reply #170 on: January 26, 2020, 11:11:25 pm »
Yes, couldn't get emulation station to work on rogue either, just creates an msdos menu selection, no other emulators show up...

Selven

  • Posts: 12
Re: RG350 "ROGUE" CFW
« Reply #171 on: January 27, 2020, 06:14:44 pm »
Hi @rafavico i've tried with Section names(settings, games, application) and all lunks and description in settings, gmenu2x get only one or 2 translation

wallacefung

  • Posts: 5
Re: RG350 "ROGUE" CFW
« Reply #172 on: February 05, 2020, 06:36:41 pm »
Thanks. I have updated to 1.7.9.6

iball

  • Posts: 197
Re: RG350 "ROGUE" CFW
« Reply #173 on: February 06, 2020, 01:24:07 am »
EDIT:  Nevermind
« Last Edit: February 06, 2020, 01:41:58 am by iball »

Nikojiro

  • Posts: 252
Re: RG350 "ROGUE" CFW
« Reply #174 on: February 07, 2020, 08:52:33 am »
Hi, I updated to 1.7.9.6, if I understood correctly the release notes I can format my external SD to ext3 or ext4?

I'd like that because FAT is very unreliable, and the RG350 won't boot if the dirty bit is set... Very annoying.

-- EDIT --

I formatted my external SD card to ext4 (using gparted), it's not recognized anymore. What did I miss? Changelog mentions "add script for format the external sdcard in ext4.". Where can I find that script?
« Last Edit: February 07, 2020, 04:14:48 pm by Nikojiro »

rafavico

  • Posts: 54
    • Videogames by Rafa Vico
Re: RG350 "ROGUE" CFW
« Reply #175 on: February 07, 2020, 08:35:12 pm »
The script is in Scriptrunner app, anyway ext3 works well too.

dubsmachine

  • Posts: 208
Re: RG350 "ROGUE" CFW
« Reply #176 on: February 08, 2020, 08:30:45 am »
Hi,
I installed Rogue onto my 350 and the Roms and emulators but FBA won't load games.
They are visible in the list but don't run.

Any ideas?

Sent from my SM-N975F using Tapatalk

ace9094

  • Posts: 766
Re: RG350 "ROGUE" CFW
« Reply #177 on: February 08, 2020, 10:23:27 am »
Hi,
I installed Rogue onto my 350 and the Roms and emulators but FBA won't load games.
They are visible in the list but don't run.

Any ideas?

Sent from my SM-N975F using Tapatalk

Which verson of FBA are you using and which romset ?
Dingoo A320, GCW0, RS-97 x2, Revo-K101, RS-90, PSP, GameGadget, New 3DS 128GB, PS Vita 200GB, RS-45, Gamebox Advance and a few other obscure devices

dubsmachine

  • Posts: 208
Re: RG350 "ROGUE" CFW
« Reply #178 on: February 08, 2020, 10:25:00 am »
No idea, the ones that came installed.
I backed them up before installing Rogue so expected them to work.
How can I check the FBA version?

Sent from my SM-N975F using Tapatalk


Nikojiro

  • Posts: 252
Re: RG350 "ROGUE" CFW
« Reply #179 on: February 10, 2020, 03:02:15 pm »
Hi, I found an issue in 1.7.9.6. When editing a shortcut in GMenu2x, you can't choose freely the CPU frequency, the only available values are the minimum (360MHz) and the max (1020 or 1080 depending on the global setting).

There should be more steps to choose from, as some emulators can most probably run at lower clock speeds, and we'd spare some battery life.

 

Post a new topic