I make a gcw0 image for NEOGEO-X. if you have a NEOGEO-X in hand I think it is interest to run the gcw0 on NEOGEO-X
At the first, the NEOGEO-X use Ingeinc JZ4770 same with the gce0 zero, so all the software must be compatible.
And these is the different:
1. 256M DDR
2. 4.3" 480x272 LCD screen
3. more keys, but now I just use part of them
4. extern Card, you know
So I just add a screen driver and a key driver. And make some change to fix the conflict of the hardware's logic.
1.L1 -> L
2.R1 -> R
3.L2 -> power
4.menu -> select
5.start -> start
6. D-pad -> D-pad
7. A B C D -> A B C D
Ok, these is the most important.
the image url: https://mega.co.nz/#!fYwwmTRJ!tbmOuPyIoMWAfgBS-MjIQWISAvx7o6MbYYVEuGyBU7g
same with the gcw0
but you need use the 256M DDR. so change the command as this:
sudo ./ingenic-boot --mbr=mbr.bin --config=gcw0_v11_ddr2_256mb --boot=ubiboot-v11_ddr2_256mb.date.bin --system=system.bin --data=data.bin
PS. I have not a GCW0 on my hand, so I don't know how the ingeic-boot work on GCW0. But on NEOGEO-X you need run the command twice, the first time is must be fail every time. So every time you burn the image you need run the command twice.
And if you do not own a linux system computer, I also make a jailbrek image for the https://www.facebook.com/neogeoxjailbreakhack
I will upload the image compatible with jailbreak cable later.
If you have any question or idea, welcome
the source code is : https://github.com/carlos-wong/linux/tree/personal/carlos/neogeox/release/v0.1