***PLEASE NOTE: THIS IS A DISCONTINUED PROJECT AND THE AUTHOR NO LONGER HAS A JXD S192 UNIT***
LordDavon's S192 Hacked Firmware:Latest 0.53b Test Beta Added. Please test for charge issues.Why is it:
This was designed to be a Shield Spoofed version of the S192 firmware.
This includes Shield Hub 4.12 in the /system/tmp directory. Navigate using ES and select to install.
KingoRoot is included for an optional root (I will post instructions)
MarketHelper is included to spoof the Market (I will post instructions soon)
JXD Alias apps have been removed.
Shield Hub installed.
Fully Patched with all JXD fixes so far.
Uses the Build.Prop from a 4.4.2 Shield Tablet.Before You Begin:
You must have a good MicroUSB cable between the device and your PC.
You must disable Windows Signed Driver support, please use the following: http://www.howtogeek.com/167723/how-to-disable-driver-signature-verification-on-64-bit-windows-8.1-so-that-you-can-install-unsigned-drivers/
Remember that this is Alpha software and may not work as well as the official Firmware.
USE AT YOUR OWN RISK!!!
Backup First -- THIS WILL ERASE ALL YOUR DATA!!!To Install:
Extract the ZIP file to a location where you will be able to find it later.
Plug your JXD into your computer using a good MicroUSB cable.
Power off the device by holding the power button for 10 seconds.
Hold the Volume + button - do not release.
Press the power button for 1 second.
Release the Power button.
The APX drivers will attempt installation and most likely fail.
- Open Device Manager
- Select the APX device under Universal Serial Bus Controllers
- Right Click and select Update Driver Software.
- Select Browse My Computer...
- Click Browse, and navigate to the folder you extracted the firmware.
- Select the nvidia_usbpcdriver folder, and select. Make sure Include Subfolders is selected.
- Click Next and finish installation.
Open the folder where the firmware was extracted in Windows Explorer.
Double click on S192_2G_DDR.bat. The firmware install will take approximately 1 min.
The device will reboot when done.
Beta 0.53 - https://mega.nz/#!JVATBSra!AFz8IMHUmgRCXequZR44iz29enwP63ajcaO5fSGMZfs