Author Topic: RS-07 Mini / RS-12 Questions  (Read 9547 times)


  • Posts: 23
Re: RS-07 Mini / RS-12 Questions
« Reply #20 on: December 17, 2018, 05:15:23 pm »
That is the one i have we think its based on Dingoo A320 TECHNOLOGY lol so we are currently looking into it.
The firmware looks a lot like the Dingoo.


  • Posts: 161
Re: RS-07 Mini / RS-12 Questions
« Reply #21 on: December 17, 2018, 05:20:07 pm »
This is rs-90 with screen resolution 320x240 and with other case.

Отправлено с моего LLD-L31 через Tapatalk


  • Posts: 245
Re: RS-07 Mini / RS-12 Questions
« Reply #22 on: December 19, 2018, 10:03:27 am »
I was kinda tempted to get one (the smoke black one), but I realized that there are no L/R buttons, which is a real show stopper, no way to properly play Mario Kart on SNES for instance. Same for a bunch of 1-on-1 fighters, even SF II requires 6 buttons.


  • Posts: 35


  • Posts: 23
Re: RS-07 Mini / RS-12 Questions
« Reply #24 on: December 29, 2018, 07:49:13 pm »
This is the story of my life, I got mine today and the firmware is bug ...: D
I have at least had a full refund.


  • Posts: 1
Re: RS-07 Mini / RS-12 Questions
« Reply #25 on: January 25, 2019, 07:34:57 am »
I'm new here. I just got a pair of Retro Arcade Mini and attempt to get some 2 player rom and bump into this forums.
Any idea what format of CP1 / CP2 rom I should be downloading ? I couldn't seems to get any working with the TF Card slot....


  • Posts: 103
Re: RS-07 Mini / RS-12 Questions
« Reply #26 on: April 02, 2019, 11:36:04 am »
Just recieved there any interest in these regarding cfw still?

ace9094 (OP)

  • Posts: 766
Dingoo A320, GCW0, RS-97 x2, Revo-K101, RS-90, PSP, GameGadget, New 3DS 128GB, PS Vita 200GB, RS-45, Gamebox Advance and a few other obscure devices


  • Posts: 1
Re: RS-07 Mini / RS-12 Questions
« Reply #28 on: May 13, 2020, 03:57:42 pm »
Not a fan of bumping old threads, I figured this is acceptable because it's the main thread for the device.

Made an account just to contribute to this; bought one of these off Amazon the other day not realising it had no custom OS just yet. Disappointed to open it and see that there's no onboard TF card etc.

However I may have found something interesting if someone who knows more than me can run with it.

Usually the USB port seems to only charge and do nothing else. But do the following and it will at least mount the inserted TF card to USB.

  • 1. Charge the device until the red LED at the back turns off
  • 2. While the device is powered off, insert the USB cable
  • 3. With the TF card inserted, power on the device.
  • 4. At first it will show the battery icon and then switch to the USB icon. This should appear now as Ingenic JzSOC USB-DISK USB Device in Device manager. It may flicker between the two and Windows makes a bunch of disconnect/reconnect sounds. Just start again if it does this, it doesn't always work

This doesn't work if you plug in the USB cable while it's powered on, re-connect the cable after initially being in USB Disk mode or if the battery isn't 100%. It seems the device exclusively charges if the battery isn't at 100%.

Maybe this is common knowledge and not as interesting as I thought (it's not mentioned in the manual or anywhere else I can find) but perhaps someone with far better knowledge than me is able to use this as a foothold to get into the onboard storage?


  • Posts: 5
Re: RS-07 Mini / RS-12 Questions
« Reply #29 on: November 02, 2021, 12:52:08 am »
Hola buenas noches.
Pongo mi granito de arena por si , despues de esto alguien le puede sacar punta para instalar un firmware correcto.
Resulta que ayer probe el mismo procedimiento para instalar opendignux para la RG-99
Contando que hace poco instale opendignux tambi?n a una rs90 tuve que instalar los drivers que supuestamente comparte esta maquina.
Entonces el procedimiento fue el siguiente :
1) instalo los drivers( yo supuestamente los tenia puestos)
2) conecto el cable USB al ordenador sin conectar a la consola
3)presiono el boton start y le doy al interruptor de encender
4) inmediatamente sin soltar el boton start conecto el cable micro USB a la maquina .
5)Abro el .bat para flashear la rg99 y cuando lo conecto dice que ha encontrado un dispositivo
6) le doy a aceptar y sale en  el programa como una serie de letras rapidas y se cierra el archivo como si hubiera hecho algo.
7) la maquina arranca pero no sale nada y no arranca el sistema antiguo . Se queda la pantalla en negro.
Esto quiere decir que el flasheador funciona y escribe en la maquina, pero no se si la programacion que se le estara metiendo es buena ya que la estoy utilizando de la rg99.

Resumen si alguna persona puede programar para meter opendignux a traves de esta manera seria un exito.
Espero que esto ayude para poder instalarlo ya que tiene toda la pinta que es posible
« Last Edit: November 02, 2021, 01:00:28 am by Tape1461 »