Dingoonity.org

Other Portable Consoles => Ingenic JZ47xx Devices => Topic started by: misamisa on January 16, 2020, 06:52:46 am

Title: Pocket Go 2 - using of L2, R2 buttons
Post by: misamisa on January 16, 2020, 06:52:46 am
I play mostly on ReGBA and POCKETSNES emulators and I noticed that using of L2, R2 buttons as L, R would be more comfortable for my fingers. Is there a way to remap them? ReGBA has input settings but it doesn't see L2, R2.
Title: Re: Pocket Go 2 - using of L2, R2 buttons
Post by: RupeeClock on January 16, 2020, 08:18:11 am
The majority of OPKs being used haven't been recompiled for Pocket Go 2 or RG 350 to take advantage of extra buttons.
A lot of them have been re-used from the GCW Zero, and still refer to that system and it's A/B/X/Y button layout where X and Y are swapped relative to the typical SNES pad layout.
Title: Re: Pocket Go 2 - using of L2, R2 buttons
Post by: valentecaio on April 14, 2020, 12:15:20 am
Hi @misamisa  !
I have just written a patch for the ReGBA to use L2 and R2 buttons in the RG350 console.

Do you want to test it in your Pocket Go 2?

The code is here https://github.com/valentecaio/ReGBA/commit/c757246f4d84a5b70136064128c32dc9689cd464
And the opk is my gdrive https://drive.google.com/drive/folders/1MrDJaaO_L4qAh4Clk_-2aiPVKOpvWnfs

If it doesn't work, we can work together to find the right key values for the L2/R2 of Pocket Go and generate an opk for you!

Cheers from Brazil :D
Title: Re: Pocket Go 2 - using of L2, R2 buttons
Post by: lemmywinks on April 17, 2020, 12:00:46 am
Hi @misamisa  !
I have just written a patch for the ReGBA to use L2 and R2 buttons in the RG350 console.

Do you want to test it in your Pocket Go 2?

The code is here https://github.com/valentecaio/ReGBA/commit/c757246f4d84a5b70136064128c32dc9689cd464
And the opk is my gdrive https://drive.google.com/drive/folders/1MrDJaaO_L4qAh4Clk_-2aiPVKOpvWnfs

If it doesn't work, we can work together to find the right key values for the L2/R2 of Pocket Go and generate an opk for you!

Cheers from Brazil :D

Unfortunately this doesn't seem to work in the PG2/Playgo, can't seem to map L2/R2 to anything as it doesn't recognise them.
Title: Re: Pocket Go 2 - using of L2, R2 buttons
Post by: valentecaio on April 19, 2020, 06:06:43 pm
Hi @lemmywinks !

This one that you tested had been compiled for the RG350, but there is already a version for the playgo, done by skewerr, here: https://github.com/skewerr/ReGBA/commit/8824d3303f1faace68d40c74997f551b6cd16d4a

I have compiled it and uploaded to my drive: https://drive.google.com/drive/folders/1MrDJaaO_L4qAh4Clk_-2aiPVKOpvWnfs

Can you test it?
Title: Re: Pocket Go 2 - using of L2, R2 buttons
Post by: lemmywinks on April 21, 2020, 12:18:56 pm
Hi @lemmywinks !

This one that you tested had been compiled for the RG350, but there is already a version for the playgo, done by skewerr, here: https://github.com/skewerr/ReGBA/commit/8824d3303f1faace68d40c74997f551b6cd16d4a

I have compiled it and uploaded to my drive: https://drive.google.com/drive/folders/1MrDJaaO_L4qAh4Clk_-2aiPVKOpvWnfs

Can you test it?

That works perfectly, thanks!!!
Title: Re: Pocket Go 2 - using of L2, R2 buttons
Post by: valentecaio on May 01, 2020, 02:03:32 am
Hi guys!

This version for the RG350 enables the right joystick and the L3/R3 keys :]

opk: https://drive.google.com/open?id=1Usj57povfK_YRB30ac0f91PHaDcdhOI-
source: https://github.com/valentecaio/ReGBA-RG350/commit/c50baff61ac70f7b1e9ac328e2c8e9c76bd36111
Title: Re: Pocket Go 2 - using of L2, R2 buttons
Post by: valentecaio on May 20, 2020, 02:14:23 am
Hi guys!
I've made a version of ReGBA that enables an USB joystick to be used.

opk in my drive (version 2020-05-19) : https://drive.google.com/drive/folders/1MrDJaaO_L4qAh4Clk_-2aiPVKOpvWnfs
source here: https://github.com/valentecaio/ReGBA-RG350/commit/4437bb581dd7524a646335742bc8b75eb00e3fee

You may need to update your firmware to enable the driver of the USB joystick.
When you have the driver, you joystick may appear in /etc/input/js1 when you plug it! If it does not appear, you are unlucky and your firmware don't have the driver!

The current version of the ROGUE firmware (v 1.7.9.9R) does not support the driver for my Generick USB Joystick, so I made a custom version of the firmware that enables this driver (also available in the drive above, in the firmware section).

If everything works, you may just plug your joystick, open ReGBA, and it may work with the same configuration (key mappings) of your native buttons.

Cheers!

EDIT: a video of it working https://youtu.be/A8kiZaQG-84 :)
Title: Re: Pocket Go 2 - using of L2, R2 buttons
Post by: nicolasmailar on October 25, 2020, 07:18:56 pm
Hi guys! 
Hi Valentecaio,
There is a new release of reGBA with some nice video configurations.
The menu button is mapped to POWER (RG-350 models).
Is it possible to map the menu button to open the app menu in the PG2 and PG2v2?

https://boards.dingoonity.org/ingenic-jz4760-devices/regba-new-version-october-20th2020-remap-menu-button-pocketgo2/

Thank you
Title: Re: Pocket Go 2 - using of L2, R2 buttons
Post by: Ninoh-FOX on February 24, 2021, 06:17:27 pm
Hi guys! 
Hi Valentecaio,
There is a new release of reGBA with some nice video configurations.
The menu button is mapped to POWER (RG-350 models).
Is it possible to map the menu button to open the app menu in the PG2 and PG2v2?

https://boards.dingoonity.org/ingenic-jz4760-devices/regba-new-version-october-20th2020-remap-menu-button-pocketgo2/

Thank you

This?

https://mega.nz/file/7hxV0KDQ#7Olif0hBiYI1e2MTFQ8bZLEej_ms5y832MnJ6-z4cJ0