Author Topic: POCKET GO 2 "ROGUE" OFW  (Read 32547 times)

ace9094

  • Posts: 753
Re: POCKET GO 2 "ROGUE" OFW
« Reply #20 on: December 29, 2019, 03:24:53 pm »
Great Job... CFW runs great.... Do you have any plans to get Network / FTP for windows 10 working ?

Thanks
ace
Dingoo A320, GCW0, RS-97 x2, Revo-K101, RS-90, PSP, GameGadget, New 3DS 128GB, PS Vita 200GB, RS-45, Gamebox Advance and a few other obscure devices

Ninoh-FOX (OP)

  • Posts: 100
Re: POCKET GO 2 "ROGUE" OFW
« Reply #21 on: December 29, 2019, 04:35:44 pm »
For this use the same drivers that RG350 in win10

Enviado desde mi Redmi 4 mediante Tapatalk


ace9094

  • Posts: 753
Re: POCKET GO 2 "ROGUE" OFW
« Reply #22 on: December 29, 2019, 06:55:12 pm »
For this use the same drivers that RG350 in win10

Enviado desde mi Redmi 4 mediante Tapatalk


I will give it a try, I did try that when running the Stock FW but it did not work :(

UPDATE - I have tested with the RG-350 driver, it gives an error "No Driver for Specified Device" even when selecting manually :(

To install the CFW I flashed the "Bin file" then run the kernel OPK file.... Is that correct ?


« Last Edit: December 29, 2019, 07:26:35 pm by ace9094 »
Dingoo A320, GCW0, RS-97 x2, Revo-K101, RS-90, PSP, GameGadget, New 3DS 128GB, PS Vita 200GB, RS-45, Gamebox Advance and a few other obscure devices

Ninoh-FOX (OP)

  • Posts: 100
Re: POCKET GO 2 "ROGUE" OFW
« Reply #23 on: December 29, 2019, 09:34:18 pm »
For this use the same drivers that RG350 in win10

Enviado desde mi Redmi 4 mediante Tapatalk


I will give it a try, I did try that when running the Stock FW but it did not work :(

UPDATE - I have tested with the RG-350 driver, it gives an error "No Driver for Specified Device" even when selecting manually :(

To install the CFW I flashed the "Bin file" then run the kernel OPK file.... Is that correct ?

yes, is correct

ChrisRR

  • Posts: 52
Re: POCKET GO 2 "ROGUE" OFW
« Reply #24 on: December 30, 2019, 08:33:10 pm »
I've tried flashing the image to 2 separate SD cards (included card and legitimate Sandisk).  It boots up, expands the partition and creates the swap file.

Then the unit restarts, displays the splash screen and then gets stuck at a black screen.

Edit:  I zeroed out the sd card and it worked fine.  I think the partition info may be incorrect somehow.
« Last Edit: December 30, 2019, 09:42:46 pm by ChrisRR »

Hellboy82BR

  • Posts: 31
Re: POCKET GO 2 "ROGUE" OFW
« Reply #25 on: January 01, 2020, 10:12:42 pm »
I realized that some apps stopped to work in this update.
Retroarch and the SORR, previously both works perfectly in the stock firmware.
Is there something related to Ncurses library (as seem in the Rg350 1.7.9.2 fix)?
Trying the same apps in Rg350 (updated to last "firmfix"+kernel) it works without issues.
« Last Edit: January 08, 2020, 12:57:49 am by Hellboy82BR »
Gemei A-330, JXD-7800, Rs-97, Rg-350, Pocketgo2

Ninoh-FOX (OP)

  • Posts: 100
Re: POCKET GO 2 "ROGUE" OFW
« Reply #26 on: January 02, 2020, 12:12:58 am »
I will check the libraries, but I think I put them in the two firmware.

RupeeClock

  • Posts: 234
Re: POCKET GO 2 "ROGUE" OFW
« Reply #27 on: January 02, 2020, 05:48:29 am »
I would like to know, does Rogue firmware (or even the stock firmware for Pocket Go 2, RG 350 etc) support a 50 HZ display mode?
One of the issues with the GCW Zero was that it could only output at 60 HZ, so some games that run at 50 FPS like PAL region games or Cave Story did not play smoothly.

gameblabla

  • Posts: 1361
Re: POCKET GO 2 "ROGUE" OFW
« Reply #28 on: January 02, 2020, 01:36:15 pm »
I would like to know, does Rogue firmware (or even the stock firmware for Pocket Go 2, RG 350 etc) support a 50 HZ display mode?
One of the issues with the GCW Zero was that it could only output at 60 HZ, so some games that run at 50 FPS like PAL region games or Cave Story did not play smoothly.
That could require tweaking the LCD timings. I'm fairly certain that it could be in theory possible for 50 hz (though it depends on the display and i'm not sure if that would work, i haven't tried it yet) but how to expose this to the software, i'm not sure. (probably a kernel dev interface of some kind like for the IPU)
Of course, it would be very nice to just set the LCD refresh rate to match some of the video game consoles i won't deny it...

Panja

  • Posts: 189
Re: POCKET GO 2 "ROGUE" OFW
« Reply #29 on: January 04, 2020, 08:17:06 am »
Thanks for your hard work!
I have it running on my PG2 and found (what I think is) a bug.

When you are in gmenu2x and press the left or right dpad button and keep it pressed, it occasionally registers a down or up dpad button.
See this video for more info.

I do not have this problem on stock firmware. So it's not a hardware related problem.

I have confirmed this with other users (on Discord) and one other Rogue on PG2 user has the same problem.
Another user with Rogue firmware but on the RG350 does not have this problem.
So my best guess it has something to do with the kernel ported over from the RG350??
« Last Edit: January 04, 2020, 08:26:54 am by Panja »

Ninoh-FOX (OP)

  • Posts: 100
Re: POCKET GO 2 "ROGUE" OFW
« Reply #30 on: January 04, 2020, 10:24:11 am »
yes, I know, I have do a release now where I output the analog stick from gmenu2x, I am waiting for PocketGo2 Tester (port of RG350 tester by Rafa Vico) for upload the files.

Panja

  • Posts: 189
Re: POCKET GO 2 "ROGUE" OFW
« Reply #31 on: January 04, 2020, 01:48:33 pm »
This is not about the analog stick.
This is about the dpad.
« Last Edit: January 04, 2020, 02:28:27 pm by Panja »

Ninoh-FOX (OP)

  • Posts: 100
Re: POCKET GO 2 "ROGUE" OFW
« Reply #32 on: January 05, 2020, 02:01:16 am »
This is not about the analog stick.
This is about the dpad.

you try the release

krait

  • Posts: 10
Re: POCKET GO 2 "ROGUE" OFW
« Reply #33 on: January 05, 2020, 07:25:50 am »
I'm on Rogue 1.0, sometimes after power on or reboot TF2 in not detected and the GUI become laggy
So I must hold the power button to turn off the device because both reboot and power off menu not working.
« Last Edit: January 05, 2020, 07:30:13 am by krait »

Panja

  • Posts: 189
Re: POCKET GO 2 "ROGUE" OFW
« Reply #34 on: January 05, 2020, 08:56:34 am »
This is not about the analog stick.
This is about the dpad.

you try the release

Great work!
Problem fixed.   8)

Ninoh-FOX (OP)

  • Posts: 100
Re: POCKET GO 2 "ROGUE" OFW
« Reply #35 on: January 05, 2020, 09:16:44 am »
I'm on Rogue 1.0, sometimes after power on or reboot TF2 in not detected and the GUI become laggy
So I must hold the power button to turn off the device because both reboot and power off menu not working.

First new.

Ninoh-FOX (OP)

  • Posts: 100
« Last Edit: January 06, 2020, 09:25:48 am by Ninoh-FOX »

Nikojiro

  • Posts: 242
Re: POCKET GO 2 "ROGUE" OFW
« Reply #37 on: January 06, 2020, 09:16:49 am »
Hi, thanks for these releases!

Just to be sure, is the kernel update included in 1.0.1?

Ninoh-FOX (OP)

  • Posts: 100
Re: POCKET GO 2 "ROGUE" OFW
« Reply #38 on: January 06, 2020, 09:25:14 am »
yes, 1.0.1 has all changes.

Panja

  • Posts: 189
Re: POCKET GO 2 "ROGUE" OFW
« Reply #39 on: January 06, 2020, 03:22:29 pm »
Did a fresh install to SD with v1.0.1
I can say the clock does not work anymore. I gets reset after a reboot.

Is there a way to just remove or hide the clock in Gmenu2x?
Or maybe that can be build in?
« Last Edit: January 06, 2020, 03:28:00 pm by Panja »

 

Post a new topic