Dingoonity.org

Other Portable Consoles => Ingenic JZ47xx Devices => Topic started by: derekh48 on October 11, 2019, 08:33:13 pm

Title: NEW FORUM USER NEEDING HELP
Post by: derekh48 on October 11, 2019, 08:33:13 pm
hi all, i recently got a pap k3 plus 16gb model. but all i get is a green power light and ned help to see if its completely bricked or recoverable. any help would be appreciated
Title: Re: NEW FORUM USER NEEDING HELP
Post by: VanZan on October 12, 2019, 01:00:59 am
It's probably the really cheap micro sd card inside that's failed. You'd need to open the device (screws at the back) and replace the micro sd. Obviously you'll need to flash the new micro sd with the original firmware or there are some custom ones out there.
Title: Re: NEW FORUM USER NEEDING HELP
Post by: derekh48 on October 12, 2019, 07:41:23 pm
thanks for the reply where can i get the original firmware please
Title: Re: NEW FORUM USER NEEDING HELP
Post by: VanZan on October 12, 2019, 11:42:59 pm
Check the stickied threads in this subforum...couple of PAP K3 Plus thread....