FBA definitely not adding on my Pymenu.
So my edit menu entry :
Name : FBA
Gmenu Identifier : FBA SDL
Description : Final Burn Alpha
Background Image : fba.png
Icon : fba.png
Folder icon (32x) : fba.png
Use File Filter : True
Use Gamelist : False
Rom Folder : FBA.029731
Preview folder : previews
Overclock : 624 mhz
So what's wronf with my config ? Any idea.
It's ok with Mame because of good advice of SomeRetroGuy.
So for me, if you have installed FBA SDL from the ipk bitgala server linked from Jutleys, I had to do as you have described, then reboot my machine. I also added "fba-sdl" after "FBA SDL" so it looked like:
Gmenu Identifier : FBA SDL,fba-sdl
Then after a reboot it showed up for me, but it seems like there is some incompatibility between Pymenu and FBA SDL.@Jack83
To be 100% sure i followed the following procedure to check:
? Bought a new 16GB SanDisk Ultra SD Card
? Flashed Version 3.0 of the RetroFW firmware (I downloaded the unpatched version and ran the included .bat file)
? Installed the card into the RS-97 and let it expand the partition
? Shut the RS-97 off and then copied my CPS and NEGEO roms, they are known good and work in Gmenu
? Copied the FBA SDL and Pymenu ipks over. Pymenu from your github, FBA SDL came from here: https://rs97.bitgala.xyz/00.%20Ipk%20releases/FBA-SDL.IPK
? Installed the SD card, reassembled the RS-97 and started it up
? Installed FBA SDL using Explorer
? Opened FBA SDL and confirmed it opened
? Edited my FBA SDL config to a higher overclock (642)
? Opened and confirmed it worked again, then set Rom paths for both CPS and NEOGEO and confirmed games launch and play
? Installed Pymenu using explorer
? Restarted the RS-97
? Ran the Pymenu Install command and rebooted
? In pymenu edited the Arcade (fba) entry to the following: Gmenu Identifier : fbsasdl,fba-a320,fba-sdl
? Rebooted and now it shows up in my "Show All: false" list
? Select the entry, press "a" black screen for a few seconds then quits back to the emulator selection screen.
I am at complete loss, i followed the above by installing pcsx4all and no issues whatsoever in either pymenu or gmenu.
I hope this helps somewhat, I am having trouble finding who is responsible for putting FBA SDL together, but maybe they can help, as it could quite possibly be something in that code.
Whew, if you made it to this part of the post, thanks for reading.