Author Topic: Menu written in python for K3P and RS97  (Read 9356 times)

HercTNT

  • **
  • Posts: 548
Re: Menu written in python for K3P and RS97
« Reply #90 on: October 18, 2018, 04:52:45 pm »
sp2 or 12? current service pack for firmware 1.3 is sp14. significant changes have been made in that time frame that may how this new menu runs. You might want to try updating to the latest service pack unless it was a typo then i have no idea.

etxeba

  • *
  • Posts: 6
Re: Menu written in python for K3P and RS97
« Reply #91 on: October 25, 2018, 01:42:16 pm »
Tried on Firmware 1.3 SP16 and 1.4 SP4 (both external). Same problem on both. Console freezes at launching run.sh

Am I doing something wrong???

Any help?

Thanks!!!

ace9094

  • *
  • Posts: 310
    • Coinopsproject: Something for Everyone
Re: Menu written in python for K3P and RS97
« Reply #92 on: October 25, 2018, 11:31:19 pm »
Tried on Firmware 1.3 SP16 and 1.4 SP4 (both external). Same problem on both. Console freezes at launching run.sh

Am I doing something wrong???

Any help?

Thanks!!!

I have the same on my 2.0... I got the old version working using the CFW Jutley created with it already done. Then I just updated the PyMenu folder to the latest version.

Some of the emulators wasn't displaying games and other emulators wouldn't boot... That said for the most part it was work great and the PyMenu look amazing. ;)
Emulation of the past is the way of the future...
CoinOPS 6: Emulation without the hassle

Dingoo The Best Handheld in the world - Why....  Because it actually fits in your pocket

etxeba

  • *
  • Posts: 6
Re: Menu written in python for K3P and RS97
« Reply #93 on: October 31, 2018, 09:12:36 am »
Tried also with jutley V1.5 Firmware and I have the same freezing problem...  :'(

Jack83 (OP)

  • *
  • Posts: 106
Re: Menu written in python for K3P and RS97
« Reply #94 on: October 31, 2018, 11:07:54 am »
Its very hard to debug something like this remotely. I created a litte test script:

https://github.com/JackD83/PyMenu/blob/master/test.sh

Put it the PyMenu folder and run it using the dingux commander. It should produce a debug.txt and upload it here. I hope we can resolve the problem this way. I only have one of the first devices to test PyMenu on


There is still no configuration for the latest 1.5fw, a lot of entries are broken, but you can edit it yourself.

etxeba

  • *
  • Posts: 6
Re: Menu written in python for K3P and RS97
« Reply #95 on: October 31, 2018, 12:07:06 pm »
OK. Thanks!

This is the file created.


Jack83 (OP)

  • *
  • Posts: 106
Re: Menu written in python for K3P and RS97
« Reply #96 on: October 31, 2018, 01:07:21 pm »
The problem is here:

Code: [Select]
Could not find platform dependent libraries <exec_prefix>
Consider setting $PYTHONHOME to <prefix>[:<exec_prefix>]
ImportError: No module named site

This is normaly done using:
Code: [Select]
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$PWD/python/usr/lib
export PATH=$PATH:$PWD/python/usr/bin

But it seems it is not working on your device :'(




etxeba

  • *
  • Posts: 6
Re: Menu written in python for K3P and RS97
« Reply #97 on: October 31, 2018, 02:05:03 pm »
OK.

And is it related to the console version or maybe the firmware I'm using? (UselessRS97 V1.3 SP16 External)

Any code modification to solve the problem?

Thanks!!!

ManiaxMax

  • *
  • Posts: 5
Re: Menu written in python for K3P and RS97
« Reply #98 on: November 03, 2018, 12:11:34 am »
I was having the same issues, was on 1.5 fw and had the exact same freezing. Tried the master but no luck, then I did the dumb thing and tried doing an install of the master and it bricked it, I was forced to reflash 1.5 and this time ran the master from the start and it worked! I just want to say how amazing the interface is, I was not sure it I wanted to keep gmenux2 or switch but after using it I am hooked! Gmenux2 looks antiquated in comparison. Any way we can OC further than 624mhz? I had a stable OC at 642 using gxmenux2. Please keep up the amazing work with this, I love it.

ace9094

  • *
  • Posts: 310
    • Coinopsproject: Something for Everyone
Re: Menu written in python for K3P and RS97
« Reply #99 on: November 06, 2018, 01:36:47 am »
Hi Folks,

I have made some progress with getting this running on an old 2.0 with 1.41 CFW by Gameblabla....

First I flashed 1.41
Then added PYMenu and run it once...
Next I then connected the RS-97 to my PC and selected USB Drive mode.
Then I copied my games and artwork.
Then added SP6

Picodrive will only see zip files until edit the settings, you do not have to add anything, just open and close the supported
file types section :)
« Last Edit: November 06, 2018, 01:50:54 am by ace9094 »
Emulation of the past is the way of the future...
CoinOPS 6: Emulation without the hassle

Dingoo The Best Handheld in the world - Why....  Because it actually fits in your pocket

etxeba

  • *
  • Posts: 6
Re: Menu written in python for K3P and RS97
« Reply #100 on: November 06, 2018, 02:45:58 pm »
Hi Folks,

I have made some progress with getting this running on an old 2.0 with 1.41 CFW by Gameblabla....

First I flashed 1.41
Then added PYMenu and run it once...
Next I then connected the RS-97 to my PC and selected USB Drive mode.
Then I copied my games and artwork.
Then added SP6

Picodrive will only see zip files until edit the settings, you do not have to add anything, just open and close the supported
file types section :)

Tried the same but still freezing on an old 2.1 console  :'( :'( :'(

Jack83 (OP)

  • *
  • Posts: 106
Re: Menu written in python for K3P and RS97
« Reply #101 on: November 06, 2018, 03:16:27 pm »
The only thing I can think of is a problem with the filesystem. Python has a lot of files that are loaded on startup. That would explain the better results for a fresh flashed fw.

Can you try a file system check on the fat32 partition? Another option could be to try a different sdcard

JHale

  • *
  • Posts: 6
Re: Menu written in python for K3P and RS97
« Reply #102 on: November 08, 2018, 01:09:08 am »
Will this work for the Retro Arcade RS-07? If not will it be in the future? Thank you!

ace9094

  • *
  • Posts: 310
    • Coinopsproject: Something for Everyone
Re: Menu written in python for K3P and RS97
« Reply #103 on: November 08, 2018, 08:39:11 pm »
Will this work for the Retro Arcade RS-07? If not will it be in the future? Thank you!

I asked this a while back my friend... I believe that it is different... Check a few posts back ;)
Emulation of the past is the way of the future...
CoinOPS 6: Emulation without the hassle

Dingoo The Best Handheld in the world - Why....  Because it actually fits in your pocket

Jack83 (OP)

  • *
  • Posts: 106
Re: Menu written in python for K3P and RS97
« Reply #104 on: November 09, 2018, 02:29:19 pm »
Will this work for the Retro Arcade RS-07? If not will it be in the future? Thank you!

Not right now. I don't have a RS-07 and I'm not planing on buying one.

I tried on the K3P which has the same resolution. It works but it is buggy.

 

Post a new topic
Post a new topic