Author Topic: RS-07 Retro Arcade Mini (JZ4760B) Custom Firmware (Read 172037 times)

y0ush4 · « **Reply #300 on:** October 09, 2019, 03:59:58 pm »

Quote from: gameblabla on October 06, 2019, 11:31:52 am

Quote from: odjinan on October 06, 2019, 10:41:19 am
seems close to the aiwo g1000: rockship rk3128 on linux+minigui..

https://boards.dingoonity.org/other-game-systems/retro-arcade-mini-2-7-inch-screen/
Yeah that's my guess, its very unlikely and unusual to see an ingenic device outputting 720p.

Please help me out sir

Sent from my iPhone using Tapatalk

odjinan · « **Reply #301 on:** October 09, 2019, 06:32:42 pm »

its probably a different device, not sure I cant help.

When you connect to your pc, how is it recognise by windows? (check previous pics)

y0ush4 · « **Reply #302 on:** October 09, 2019, 07:42:54 pm »

It?s not I mean no reaction on PC like nothing connected or disconnected
And
What about rs-07 discord channel why it doesn?t open??

Sent from my iPhone using Tapatalk

odjinan · « **Reply #303 on:** October 10, 2019, 03:20:53 am »

check the #welcome saloon and follow instruction to activate different sub-category.

for the aiwo, you need a male-male usb cable to connect the device using the top full usb on your device. the lower one wont work, the small one is for charging only.

y0ush4 · « **Reply #304 on:** October 10, 2019, 03:29:00 am »

Yes I used top USB port and usb male2male and I know the little jack is for charging only
In fact I tried on every port and every possible button combination but it doesn?t go in flash mode or backup mode it just power up normally nothing happens

Sent from my iPhone using Tapatalk

y0ush4 · « **Reply #305 on:** October 12, 2019, 07:39:03 am »

Bump!!

Discord channel is not working yet any mail of the developer or someone doing research on it??

Sent from my iPhone using Tapatalk

riverinwoods · « **Reply #306 on:** October 13, 2019, 03:10:46 am »

Quote from: ace9094 on September 30, 2019, 04:42:32 pm

Quote from: tophuntyer99 on September 23, 2019, 07:12:50 am
don't give up yet, it's still a lovely device and the best mini-arcade.

Agreed I wish we could get replacement buttons & stuff... I would love to see the version FBA that allows use of the GUI and the features that allow to hide clones etc

As long as it plays Streetfighter II... then I guess I am happy ;

Just really hope some1 changes fba ext button configuration so we can play 2 players on all the cap com fighting games 1 day....

y0ush4 · « **Reply #307 on:** October 19, 2019, 09:09:11 pm »

Quote from: gameblabla on October 05, 2019, 12:08:14 pm

Hmm interesting. In theory, the JZ4760B can actually support HDMI output but it's only at like 480p minimum...

Make sure to backup your original sd card and flash my CFW on another arcade mini.
I think it will work on the LCD screen but i'm not sure how the kernel handles the switching to the HDMI board given that the kernel
source only seems to support one screen forever...

Does HDMI out even work on your machine ?

HERE WE GO

THE FULL BACKUP OF 4.3INCH WITH HDMI
https://drive.google.com/file/d/1HVXz_0nqz1OmUHmI9THkFY5cI_TTcy7Y/view?usp=sharing

themyst · « **Reply #308 on:** October 20, 2019, 02:10:36 am »

Hi, I just flashed the custom firmware onto my RS-07, and it seems to be mostly working fine.

A few questions:

- Are there any alternative ROMsets that work well on FBA? I'm using a MAME .78 ROMset from my Pi builds, which never had any issues. I understand anything aside from CPS1/2/Neo won't really work that well, but even half of my Neo roms won't load properly. The ones that don't work will flash a garbled bios screen and have blue dots on the left side. I will try building a ROMset using .139 since its closer to the target MAME version and try again.

- Does anyone have a PocketSNES config that has the buttons remapped, or know how to do so? The existing button mapping is unusable, I'd love to see a button mapping with top row LXR and bottom row YBA. This would be a great universal button layout for SNES games!

- Is there a way to eliminate the TV-OUT pop-up when the unit is started? I have no interest in ever connecting this unit to a TV, although being able to use those included 6 button controllers would be nice!

Thanks in advance! (I have an RG350 coming soon which I hope will run stuff better than this unit!)

evilteddy123 · « **Reply #309 on:** October 20, 2019, 04:08:10 am »

Quote from: themyst on October 20, 2019, 02:10:36 am

- Is there a way to eliminate the TV-OUT pop-up when the unit is started? I have no interest in ever connecting this unit to a TV, although being able to use those included 6 button controllers would be nice!

If you dont ever intend to use tv out, would you ever be interested in selling me your av cable? I bought mine used and it didnt come with one!

ace9094 · « **Reply #310 on:** October 20, 2019, 04:47:46 am »

Quote from: themyst on October 20, 2019, 02:10:36 am

- Are there any alternative ROMsets that work well on FBA? I'm using a MAME .78 ROMset from my Pi builds,

EDIT

Try FinalBurn Alpha v0.2.97.35 The Romset is out there if you look

themyst · « **Reply #311 on:** October 20, 2019, 05:05:55 am »

Believe me, I've looked high and low for that particular ROMset everywhere (without mentioning where), can't find it. I don't think at least for NeoGeo its not the ROMset, it's the emulator. Certain games (e.g. bstars, aof, Fatfury2) won't load at all, others like mslug work fine. All the CPS games work well.

jimmybonsaville · « **Reply #312 on:** November 06, 2019, 10:04:48 am »

Quote from: themyst on October 20, 2019, 05:05:55 am

Believe me, I've looked high and low for that particular ROMset everywhere (without mentioning where), can't find it. I don't think at least for NeoGeo its not the ROMset, it's the emulator. Certain games (e.g. bstars, aof, Fatfury2) won't load at all, others like mslug work fine. All the CPS games work well.

https://archive.org/ is your friend. I found a full romset on here. Its a VERY legitimate site btw.

jimmybonsaville · « **Reply #313 on:** November 06, 2019, 10:05:26 am »

Quote from: evilteddy123 on October 20, 2019, 04:08:10 am

Quote from: themyst on October 20, 2019, 02:10:36 am
- Is there a way to eliminate the TV-OUT pop-up when the unit is started? I have no interest in ever connecting this unit to a TV, although being able to use those included 6 button controllers would be nice!
If you dont ever intend to use tv out, would you ever be interested in selling me your av cable? I bought mine used and it didnt come with one!

Sorry I never got around to showing you my lead...ill do it this evening for you.

evilteddy123 · « **Reply #314 on:** November 06, 2019, 03:32:04 pm »

@jimmybonsaville oh no problem! Thanks. I'm just hoping for a new FW update that might actually fix the tv issue.

jimmybonsaville · « **Reply #315 on:** November 11, 2019, 03:10:10 pm »

Quote from: jimmybonsaville on November 06, 2019, 10:05:26 am

Quote from: evilteddy123 on October 20, 2019, 04:08:10 am
Quote from: themyst on October 20, 2019, 02:10:36 am
- Is there a way to eliminate the TV-OUT pop-up when the unit is started? I have no interest in ever connecting this unit to a TV, although being able to use those included 6 button controllers would be nice!
If you dont ever intend to use tv out, would you ever be interested in selling me your av cable? I bought mine used and it didnt come with one!

Sorry I never got around to showing you my lead...ill do it this evening for you.

Absolute nighmare trying to post a picture directly on here @evilteddy123 . However I use this exact cable to extend the video out to a portable DVD player screen Input. Shows you the ends

https://www.amazon.co.uk/gp/product/B00I7XRPBO/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1

Hope this helps

evilteddy123 · « **Reply #316 on:** November 12, 2019, 09:05:18 pm »

Thanks! Yes this is the same aux lead I have too!

jimmybonsaville · « **Reply #317 on:** November 13, 2019, 10:07:32 am »

Quote from: evilteddy123 on November 12, 2019, 09:05:18 pm

Thanks! Yes this is the same aux lead I have too!

Must be a Firmware issue as i 100% use this lead and works fine...all be it with the current Video Out corruption issues.

jimmybonsaville · « **Reply #318 on:** November 13, 2019, 10:11:30 am »

https://drive.google.com/file/d/0B-YjPkPs39cmWHVGSXpGQVpWLXpkSW9pbk1JLTVzYzZKLU1N/view

Nikojiro · « **Reply #319 on:** November 25, 2019, 08:21:06 am »

Hi!

I'm almost done making a good looking skin for the CFW. My last remaining issue is that previews in the file selector are kind of shifted to the middle of the screen instead of being aligned to the right side as usual.

I believe it might be that GMenu2x calculates element position based on a 320x240 resolution instead of 480x272. I can't find the resolution anywhere in configuration files...

My last option is to find some configuration property in skin.conf that allows me to shift previews. I've tried previewX but it's not working. Where can I find a reference documentation for this specific build?