Dingoonity.org

https://github.com/Ninoh-FOX/RG280M-ROGUE-CFW/releases/download/v1.7.10/sd_image.bin

https://github.com/Ninoh-FOX/RG280M-ROGUE-CFW/releases/download/v1.7.10u2/rg280m-update-1.7.10u2-2021-02-23.opk


https://github.com/Ninoh-FOX/RG280V_ROGUE/releases/download/v1.7.10u17/sd_image.bin

https://github.com/Ninoh-FOX/RG280V_ROGUE/releases/download/v1.7.10u19/rg280v-update-1.7.10u19-2021-02-05.opk

Same feactures that RG350

Steps for install the cfw.

First download the sd_image.bin and burn with balena in a new micro sdcard (better sandisk 16gb higt speed)

The next step, when finish all instalation prosses in the console, is download the last update package and update the console.

-----------------------------------------------

new update, I hope it is the last in the current version.

fix rumble weak "motor"

add rg280v hardware tester program



apart from now having lower brightness levels, now the changes in the aspect ratio and sharpness are saved, so that even if you turn off the console you will not have to adjust it again, apart from that you can also change the sharpness in the gmenu2x menu, I have never changed it, but users send

Works great, thanks so much! Just did the minor update as well which addresses the IPU resolutions. All my emulators are working great now, with the exception of Handy - its just a black screen on launch and requires a hard reset to exit.

Most likely you used my Handy port, that tries to set a resolution of 160x112, the atari lynx native resolution plus 10 extra vertical pixels. (due to an issue with the IPU implementation in the beta FW)
This fails, as it's not among the resolutions he hardcoded.
https://github.com/Ninoh-FOX/RG280_kernel/commit/10f9475f425b9bb52f671ca747a3942557714aeb

I hate to be negative but i fail to see the point of Rogue CFW over say, the beta firmware. Might be still useful to run some stuff that wasn't updated for beta like Tac08 but that's about it. (I would love for him to eventually work on adding PGO2 support to the Linux 5.10 kernel or perhaps rebase Rogue upon that)

Thank you very much.
Works great, but I have a question in GBA
After updating u11, GBA had the best screen ratio and performance on hardware scale
After updating u12, it will be executed in full screen and frame drop will occur
Currently it does not solve the problem that has progressed to u14
Could you check what the problem is?

Quote from: whd6545 on December 28, 2020, 01:23:29 am

Thank you very much.
Works great, but I have a question in GBA
After updating u11, GBA had the best screen ratio and performance on hardware scale
After updating u12, it will be executed in full screen and frame drop will occur
Currently it does not solve the problem that has progressed to u14
Could you check what the problem is?

this is strange, because you can change the screen ratio if you push the power+a buttons.


Golden Sun 2 to 59/59 fps

Thank you!
I don't know if there is a resolution change function..
Change the resolution with the POWER+A key and run at full speed!!

https://github.com/Ninoh-FOX/RG280V_ROGUE/releases/tag/v1.7.10u17

updated alsalib to version 1.2.4
updated alsamixer to version 1.1.7
add libpng 16 from OD
fixed sound mute level in pcm
fixed sound crashes in some emulators (you have to delete the old temper settings from the folder /usr/local/home/.temper/config/)
updated Picodrive emulator to 1.97 https://github.com/irixxxx/picodrive
recompiled Temper 1.24.2 https://github.com/gameblabla/temper/tree/f3328369d5e00e70b9c2ea095e09b1dec6452de5
updated pr-boom+ to OD-pr-boom+

With the latest update my sdcard appears under /media/mmcblk1p5 mountpoint. Not in /media/sdcard/. I have reinstalled from clean update17 sd_image.bin with the same result. I'm switching back to u16.

This is only is possible if you slot2 sdcard has more of 5 partitions, I go to see this anyway when I am finish in the work in the next week.

Anyway, I am download the sd_imagen.bin, flashed this in a new sdcard and all work fine.

new update!!