Author Topic: Gpd Win1 Cooling Mod  (Read 6206 times)

tubbstcg (OP)

  • Posts: 4
Gpd Win1 Cooling Mod
« on: April 24, 2019, 03:10:58 am »
I thought I would post something cool since I was new to the forum. I posted about this a while back on reddit but it never gained traction or no one seemed much interested but I took the normal copper shim mod and took it a little further. I took a 1x9x80mm heat pipe and epoxied it to the heatsink and cut little copper fins which i epoxied to the heatsink as well. I also opened up a hole on the back of the case just above the fan that I covered with a piece of metalic mesh to help increase airflow. This is my V1 to this project and I am currently in the process of trying to get a whole new heatsink CNC'd with the fins cut directly into the piece of copper although I don't expect that to move too quickly its fun and keeps my mind occupied. Hope others find this as cool as I have.


  • Posts: 382
Re: Gpd Win1 Cooling Mod
« Reply #1 on: May 07, 2019, 06:12:46 am »
Those look neat! Exactly what I had in mind for the grills/ventilation.

But I simply don't have the tools (and skills) to do it.

Not sure about the heatpipe though. Does it works?

I never open mine, just up to the bottom shell, never went further than that.

tubbstcg (OP)

  • Posts: 4
Re: Gpd Win1 Cooling Mod
« Reply #2 on: May 09, 2019, 07:23:16 pm »
The whole setup works reasonably well I don't have to turn the fan above medium usually. Most of the time I don't even run the fan and it stays cool while I am playing low draw 2d games. It's much more comfortable to hold after all the improvements.


  • Posts: 1
Re: Gpd Win1 Cooling Mod
« Reply #3 on: May 13, 2020, 04:00:42 am »
Hi there! Nice mod by the way.

Did you ever made the V2 mod that you wanted to make? This mod inspired me to try something with a printed 3d case.


  • Posts: 51
Re: Gpd Win1 Cooling Mod
« Reply #4 on: May 15, 2020, 12:30:29 pm »
Wow, that's awesome <3


Post a new topic