Author Topic: Cases for GPD WIN (Read 19299 times)

ArchiMark · « **on:** November 01, 2016, 03:07:23 am »

I found a fairly hardshell zippered case that I had lying around that fits the WIN quite well. Got it some years ago. It says 'TAP IT' on one side.

Anyone else found any cases for the GPD WIN?

Would be nice if someone made a leather one.

Either pouch style or book style with a closure strap with snap.

nex86 · « **Reply #1 on:** November 01, 2016, 03:15:08 am »

Any case where a 3Ds XL fits in

ArchiMark · « **Reply #2 on:** November 01, 2016, 03:20:23 am »

Great, thanks for the tip.....

Faust · « **Reply #3 on:** November 01, 2016, 09:24:55 am »

Quote from: ArchiMark on November 01, 2016, 03:07:23 am

I found a fairly hardshell zippered case that I had lying around that fits the WIN quite well. Got it some years ago. It says 'TAP IT' on one side.

Anyone else found any cases for the GPD WIN?

Would be nice if someone made a leather one.

Either pouch style or book style with a closure strap with snap.

Technoskin 3dsxl case:

https://www.amazon.com/dp/B00XMM6L8S/

MacGnG · « **Reply #4 on:** November 03, 2016, 03:52:24 am »

amazon has some nice 3ds XL cases

AVahne · « **Reply #5 on:** November 03, 2016, 08:46:24 am »

Would it fit a 3ds xl case better or the official GPD XD case better?

MacGnG · « **Reply #6 on:** November 10, 2016, 08:37:53 pm »

i haven't used an original case on the win or the XD. the 3ds cases were much better than the xd case and easier to get on amazon. the 3ds xl cases are the same way. much more choices of style and color, as well as storage solutions and pockets and zippers.

the one I have been using the past week is the "TAKE CASE" .. it is a hard case with a divider and many pockets as well as an extra mesh zip holder and cushion protection.

it is on amazon: https://www.amazon.com/dp/B00UG63VDG

Gin2168 · « **Reply #7 on:** November 10, 2016, 08:49:37 pm »

Quote from: MacGnG on November 10, 2016, 08:37:53 pm

the one I have been using the past week is the "TAKE CASE" .. it is a hard case with a divider and many pockets as well as an extra mesh zip holder and cushion protection.

it is on amazon: https://www.amazon.com/dp/B00UG63VDG

This is the exact case I am using and it's fantastic =D

RetroVortex · « **Reply #8 on:** November 10, 2016, 09:13:58 pm »

I'm using this case:
https://www.amazon.co.uk/New-3DS-Retro-Hard-Pouch/dp/B00RZ7TCG4

Netjam · « **Reply #9 on:** November 11, 2016, 12:05:33 am »

I was looking for a pouch sort of case, kept getting rugged ones. I got the following off AliExpress:
https://www.aliexpress.com/item/Travel-Carry-Case-Storage-Pouch-For-The-New-Nintendo-3DS-XL-PS-Vita-New-3DS-LL/32287844407.html
This won't fit in your pockets though.

This case looks decent but the band to close doesn't look so nice:
https://www.amazon.co.uk/d/PC-Video-Games/Nintendo-Licensed-System-Wallet-Black-3DS-DSi/B0035LBLW2/

There's videos of it floating about for the GPD XD and the DSi so you could look at that.

. · « **Reply #10 on:** November 17, 2016, 06:01:07 am »

RXShorty · « **Reply #11 on:** November 27, 2016, 02:33:24 pm »

I have bought the GPD Case from Aliexpress.

Fits great!

Macatron · « **Reply #12 on:** November 27, 2016, 06:02:34 pm »

Quote from: MacGnG on November 10, 2016, 08:37:53 pm

i haven't used an original case on the win or the XD. the 3ds cases were much better than the xd case and easier to get on amazon. the 3ds xl cases are the same way. much more choices of style and color, as well as storage solutions and pockets and zippers.

the one I have been using the past week is the "TAKE CASE" .. it is a hard case with a divider and many pockets as well as an extra mesh zip holder and cushion protection.

it is on amazon: https://www.amazon.com/dp/B00UG63VDG

Whoa! That's a really nice case! Thanks for sharing.

iStix · « **Reply #13 on:** November 27, 2016, 10:32:59 pm »

i bought this case:

The win fits perfectly just didnt had time to upload my own photo

its quite hard padding on the outside wich its nice should it take a drop.
Inside also nice and soft and additional storage space.
As i am from holland this is the only link i could find so fast:
https://www.amazon.co.uk/Speedlink-SL-5221-BK-01/dp/B00B72LGMQ

it appears to be the same as the GPD case

Smoker1 · « **Reply #14 on:** November 28, 2016, 01:06:10 am »

Trying to make my own Carbon Fiber Skin/Decal. First go doesnt look all that great on the Buttons Side. But the Left Side on the Directional and Joystick look good.

Smoker1 · « **Reply #15 on:** December 26, 2016, 07:23:07 am »

Redid the Skin on the Gamepad/Keyboard. Looks slightly better

Macatron · « **Reply #16 on:** December 26, 2016, 03:21:47 pm »

Wow, that looks nice!

xportpnoy · « **Reply #17 on:** December 27, 2016, 04:28:01 pm »

Quote from: Smoker1 on December 26, 2016, 07:23:07 am

Redid the Skin on the Gamepad/Keyboard. Looks slightly better

Nicely done! Any tip on how you did this?I only did the glossy part of the GPD. Nice work!

Sent from my iPad using Tapatalk

Smoker1 · « **Reply #18 on:** December 29, 2016, 08:22:13 am »

Quote from: xportpnoy on December 27, 2016, 04:28:01 pm

Quote from: Smoker1 on December 26, 2016, 07:23:07 am
Redid the Skin on the Gamepad/Keyboard. Looks slightly better

Nicely done! Any tip on how you did this?I only did the glossy part of the GPD. Nice work!

Sent from my iPad using Tapatalk

Carbon Fiber Vinyl Wrap
https://www.amazon.com/gp/product/B0059XCVVO/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Also a Box Cutter Blade or a Xacto Knife and when finished, use a Blow-Dryer on Low Heat like the typical Skinomi Skins to make sure everything Sticks. Let it cool down and should be good to go. Just be sure to set any sections that want to be difficult like the Joystick Areas and the bottom left and Right Corners where the KeyBoard meets. Now just need to get the back of the Monitor and yeah......the Ports.......I wont bother yet. LOL

xportpnoy · « **Reply #19 on:** December 29, 2016, 05:51:03 pm »

Quote from: Smoker1 on December 29, 2016, 08:22:13 am

Quote from: xportpnoy on December 27, 2016, 04:28:01 pm
Quote from: Smoker1 on December 26, 2016, 07:23:07 am
Redid the Skin on the Gamepad/Keyboard. Looks slightly better

Nicely done! Any tip on how you did this?I only did the glossy part of the GPD. Nice work!

Sent from my iPad using Tapatalk

Carbon Fiber Vinyl Wrap
https://www.amazon.com/gp/product/B0059XCVVO/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Also a Box Cutter Blade or a Xacto Knife and when finished, use a Blow-Dryer on Low Heat like the typical Skinomi Skins to make sure everything Sticks. Let it cool down and should be good to go. Just be sure to set any sections that want to be difficult like the Joystick Areas and the bottom left and Right Corners where the KeyBoard meets. Now just need to get the back of the Monitor and yeah......the Ports.......I wont bother yet. LOL

Thanks for the tips. I might do it this weekend and post some picture, but I don't think it will be as nice as you did on yours hehehe

Sent from my iPhone using Tapatalk

Author Topic: Cases for GPD WIN (Read 19299 times)

ArchiMark (OP)

ArchiMark (OP)