Author Topic: GPDQ9: Can't Flash my GPDQ9, Problem with RKBATCHTOOL, HELP ME PLEASE!  (Read 479 times)

Kenju (OP)

  • Posts: 25
Hello,
I have problem with my GPDQ9.
When i try to flash it with latest firmware by skelton, RKBATCHTOOL Didn't detect my GPDQ9. say no Device connected with green or pink color. but i did finish all instalations of driver.
So can you help me please! when i power on GPD IT stuck in : No Command!
can you help me pelase?

Kenju (OP)

  • Posts: 25
vol+ and power on:

skelton

  • Posts: 6891
With your GPD off, just press Volume + button and connect to USB, without pressing power.

If still is not detected, is a drivers issue, try with a win 77 computer and usb 2.0 port as a preference.
Retired

sirp0p0

  • Posts: 600
With your GPD off, just press Volume + button and connect to USB, without pressing power.

If still is not detected, is a drivers issue, try with a win 77 computer and usb 2.0 port as a preference.
Also use a good USB cable. Not the one that came with the Q9. I couldn't flash at first because of a poor connection over USB.

 

Post a new topic