• HomeBoards
  • RulesRules
  • HelpHelp
  • WikiWiki
  • Donate

Author Topic: [ROM] LegacyROM 2.0 for GPD Q88+ and Q89  (Read 38864 times)

Skelton-retired (OP)

  • Posts: 6894
Re: [ROM] LegacyROM 2.0 for GPD Q88+ and Q89
« Reply #40 on: February 12, 2016, 07:49:31 am »
My rom is not compatible with PSV models. If you flash it the analogs won't work.
Logged
Retired

LeandroGado

  • Posts: 1
Re: [ROM] LegacyROM 2.0 for GPD Q88+ and Q89
« Reply #41 on: March 18, 2016, 02:51:56 pm »
I'm having problems to flash this ROM in Windows 10, it doesn?t recognize the device... not pink... not green, nothing... the driver seems to be installed correctly...
?Any ideas?
Logged

Skelton-retired (OP)

  • Posts: 6894
Re: [ROM] LegacyROM 2.0 for GPD Q88+ and Q89
« Reply #42 on: March 19, 2016, 02:13:30 pm »
Try this guide:

http://chinagadgetsreviews.blogspot.com.es/2014/06/how-to-easily-install-rockchip-rockusb.html

Or this one:

http://www.minixforum.com/threads/rockchip-drivers-for-windows-8-1-need-help.2130/

I use windows 7 so not sure if it will work. Also, check that your q88/q89 is not the new q88PSV under settings/about device, because my rom is not compatible with those models.
Logged
Retired

jcsbr

  • Posts: 9
Re: [ROM] LegacyROM 2.0 for GPD Q88+ and Q89
« Reply #43 on: March 10, 2017, 10:28:47 am »
Hello guys. My gpd q88s since it arrived is turning itself off and restarting. I updated the official rom and installed legacyrom, but it keeps restarting by itself. Which may be happening. Grateful.
Logged

Skelton-retired (OP)

  • Posts: 6894
Re: [ROM] LegacyROM 2.0 for GPD Q88+ and Q89
« Reply #44 on: March 10, 2017, 10:32:03 am »
Quote from: jcsbr on March 10, 2017, 10:28:47 am
Hello guys. My gpd q88s since it arrived is turning itself off and restarting. I updated the official rom and installed legacyrom, but it keeps restarting by itself. Which may be happening. Grateful.
Is your device a q88psv model, the one with PSVita like sticks? In that case my ROM is not compatible. But if you are having reboot with stock firmware Too probably your device is defective.
Logged
Retired

jcsbr

  • Posts: 9
Re: [ROM] LegacyROM 2.0 for GPD Q88+ and Q89
« Reply #45 on: March 10, 2017, 10:51:57 am »
Quote from: skelton on March 10, 2017, 10:32:03 am
Quote from: jcsbr on March 10, 2017, 10:28:47 am
Hello guys. My gpd q88s since it arrived is turning itself off and restarting. I updated the official rom and installed legacyrom, but it keeps restarting by itself. Which may be happening. Grateful.
Is your device a q88psv model, the one with PSVita like sticks? In that case my ROM is not compatible. But if you are having reboot with stock firmware Too probably your device is defective.

My gpd q88s is not psv model. in that case very thanks.
Logged

jcsbr

  • Posts: 9
Re: [ROM] LegacyROM 2.0 for GPD Q88+ and Q89
« Reply #46 on: March 10, 2017, 11:01:00 am »
I saw in some forums people dissatisfied with willgoo, for sending defective devices. I thought it was unusual, but I was wrong. I am also in the same situation, I bought a device in willgoo and it came with defect. And send to exchange is not feasible, arrived for me 3 months later, even paying for a faster delivery. very sad...
Logged

Skelton-retired (OP)

  • Posts: 6894
Re: [ROM] LegacyROM 2.0 for GPD Q88+ and Q89
« Reply #47 on: March 10, 2017, 11:37:19 am »
Well, if you paid via paypal maybe you can open a dispute to them, because they sent you a defective device.
Logged
Retired
Pages: 1 2 [3]