• HomeBoards
  • RulesRules
  • HelpHelp
  • WikiWiki
  • Donate

Author Topic: FCEUX 2.2.3 - UPDATE 2016-08-23  (Read 76401 times)

blastyrant

  • Posts: 113
Re: FCEUX 2.2.2 - update 2014-02-10
« Reply #80 on: March 01, 2014, 06:57:29 am »
it's not so much that it needs a controller remapping option, more so that it simply needs the two buttons remapped. on a diamond pattern setup, like what we have with the zero, the X/B buttons work better than B/A. This is because it is much easier to transfer our thumbs down to B than up to A.

does it do on-the-fly ips patching? with the amount of ips patches available for nes games, it would be nice to see this added. so far i have only found time to test pre-patched roms, and those are running great.
« Last Edit: March 01, 2014, 07:06:22 am by blastyrant »

AtariHERO

  • Posts: 351
Re: FCEUX 2.2.2 - update 2014-02-10
« Reply #81 on: April 24, 2014, 08:19:04 pm »
still having troubles partitioning / sorting full romsets
(working great on everdrive)

if i have to enter 3 subs to get to the SU dir
emulator resets (maybe lots of files under that name)

but if i organize in lots of subdirs y also get problems

Mookie7162

  • Posts: 13
FCEUX 2.2.2 - update 2014-02-10
« Reply #82 on: April 25, 2014, 03:56:42 am »
*edit* disregard... Couldn't find the full screen in the settings... Found it. Great emulator and update. Thanks!!
« Last Edit: April 25, 2014, 04:38:45 am by Mookie7162 »

Warrior

  • Posts: 11
Re: FCEUX 2.2.2 - update 2014-02-10
« Reply #83 on: May 01, 2014, 06:44:31 am »
Finally decided to stop lurking and contribute  ;D

Here is a modified .opk of the current 2.2.2 source with the following scroll modifications to the ROM select screen:

-Hold down UP or DOWN for continuous (single-item) scrolling.
-Hold down LEFT or RIGHT for fast scrolling
-Press LB for skip to beginning
-Press RB for skip to end


Included is the modified source if OP wants to verify and integrate into GIT.

http://www.sendspace.com/file/12xwsc

Gab1975

  • Posts: 1165
Re: FCEUX 2.2.2 - update 2014-02-10
« Reply #84 on: May 01, 2014, 07:04:30 am »
Finally decided to stop lurking and contribute  ;D

Here is a modified .opk of the current 2.2.2 source with the following scroll modifications to the ROM select screen:

-Hold down UP or DOWN for continuous (single-item) scrolling.
-Hold down LEFT or RIGHT for fast scrolling
-Press LB for skip to beginning
-Press RB for skip to end


Included is the modified source if OP wants to verify and integrate into GIT.

http://www.sendspace.com/file/12xwsc

Thanks Warrior for your addition ! :) Indeed previously the navigation through the ROMs menu was rather slow...
maybe the d-pad sensibility is a bit too high (in any case not a "big problem")

Xaijiqq

  • Posts: 450
Re: FCEUX 2.2.2 - update 2014-02-10
« Reply #85 on: May 01, 2014, 08:08:17 am »
scroll modifications to the ROM select screen

wow thank you, works great!  all thats really needed now is the option to configure buttons

Warrior

  • Posts: 11
Re: FCEUX 2.2.2 - update 2014-02-10
« Reply #86 on: May 01, 2014, 01:53:37 pm »
maybe the d-pad sensibility is a bit too high (in any case not a "big problem")

Thanks for the feedback.  What exactly are you finding too sensitive?  The LEFT/RIGHT scroll or just holding down a key in general?  Reason I'm asking is because I used the SDL library's default repeat delay and repeat interval for the "hold down" sensitivity.

Thanks!

Gab1975

  • Posts: 1165
Re: FCEUX 2.2.2 - update 2014-02-10
« Reply #87 on: May 01, 2014, 03:32:06 pm »
Thanks for the feedback.  What exactly are you finding too sensitive?  The LEFT/RIGHT scroll or just holding down a key in general?  Reason I'm asking is because I used the SDL library's default repeat delay and repeat interval for the "hold down" sensitivity.

Thanks!

When I hold down the d-pad (in general) the input response is a bit too fast, in my opinion, it could be better to slow down (just a little) the left/right and up/down scrolling. In any case it's not a "real problem"...
Thanks again for your addition! :)

Warrior

  • Posts: 11
Re: FCEUX 2.2.2 - update 2014-02-10
« Reply #88 on: May 02, 2014, 07:36:18 pm »
wow thank you, works great!  all thats really needed now is the option to configure buttons

Button configuration on the way... just need to do a little clean up work.   8)

gustavolatil

  • Posts: 131
Re: FCEUX 2.2.2 - update 2014-02-10
« Reply #89 on: May 02, 2014, 08:07:07 pm »
wow thank you, works great!  all thats really needed now is the option to configure buttons

Button configuration on the way... just need to do a little clean up work.   8)
and triple buffering? would appreciate!
also, thanks for the update!

Gab1975

  • Posts: 1165
Re: FCEUX 2.2.2 - update 2014-02-10
« Reply #90 on: May 02, 2014, 08:26:56 pm »
and triple buffering? would appreciate!
also, thanks for the update!

I don't think that the triple buffer support is important for this emulator... the games already run at full speed and smoothly... ;)

gustavolatil

  • Posts: 131
Re: FCEUX 2.2.2 - update 2014-02-10
« Reply #91 on: May 03, 2014, 08:34:12 pm »
and triple buffering? would appreciate!
also, thanks for the update!

I don't think that the triple buffer support is important for this emulator... the games already run at full speed and smoothly... ;)
oh, i see. nebuleon explained it in the caprice32 emulator.
but! i have installed the brick edition successfully and now the emu doesn't work :/
also, wagan land is buggy and glitchy

Gab1975

  • Posts: 1165
Re: FCEUX 2.2.2 - update 2014-02-10
« Reply #92 on: May 03, 2014, 08:57:44 pm »
but! i have installed the brick edition successfully and now the emu doesn't work :/
also, wagan land is buggy and glitchy

Try to delete the opk and the related config-dir in $home folder, after re-upload the emulator... I had the same problem and I solved it with the delete/re-upload procedure! ;) (my GCW Zero has the brick firmware)
« Last Edit: May 03, 2014, 09:19:50 pm by Gab1975 »

gustavolatil

  • Posts: 131
Re: FCEUX 2.2.2 - update 2014-02-10
« Reply #93 on: May 03, 2014, 10:11:18 pm »
but! i have installed the brick edition successfully and now the emu doesn't work :/
also, wagan land is buggy and glitchy

Try to delete the opk and the related config-dir in $home folder, after re-upload the emulator... I had the same problem and I solved it with the delete/re-upload procedure! ;) (my GCW Zero has the brick firmware)
t h a n k s ! ! ! now it's working :)

dmitry_smagin (OP)

  • Posts: 423
Re: FCEUX 2.2.2 - update 2014-02-10
« Reply #94 on: May 04, 2014, 07:02:24 pm »
Finally decided to stop lurking and contribute  ;D

Here is a modified .opk of the current 2.2.2 source with the following scroll modifications to the ROM select screen:

-Hold down UP or DOWN for continuous (single-item) scrolling.
-Hold down LEFT or RIGHT for fast scrolling
-Press LB for skip to beginning
-Press RB for skip to end


Included is the modified source if OP wants to verify and integrate into GIT.

http://www.sendspace.com/file/12xwsc

Thanks, man.
Your patch is approved! :)
https://github.com/dmitrysmagin/fceu320-rzx50/commit/8e404c31c42e9937d4af9dbf2bd691c5cc2abdeb
GCW-Zero prototype, Dingoo a320, Ritmix rzx-50, Dingoo a380, Xperia Play

Xaijiqq

  • Posts: 450
Re: FCEUX 2.2.2 - update 2014-02-10
« Reply #95 on: May 05, 2014, 01:26:59 am »
Button configuration on the way... just need to do a little clean up work.   8)

fantastic news!  :D

Warrior

  • Posts: 11
Re: FCEUX 2.2.2 - update 2014-02-10
« Reply #96 on: May 05, 2014, 03:24:31 am »
Thanks, man.
Your patch is approved! :)

Not a problem, just trying to help where I can.  Thank you for the great port!

As promised, here is control mapping. :)

-Navigate to /Settings/Control Settings
-Press SELECT on the desired button (editing will be denoted by a ">>")
-Press any of the four keys (X Y A B).

Notes:
-Error handling will not allow mapping of same key more than once.
-Controls map on a per-game instance just like the rest of the config menus. 
 Make sure to use the "Save config as default" option under the "Settings" menu if you want all games to reflect   
 mappings.


http://www.sendspace.com/file/0lg4q1

Other adjustments:
-Fixed indexing on video_settings menu
-Slowed down ROM selection scrolling speed per Gab's suggestion.

Source is also included to be reviewed and added to GIT.

Enjoy!

gustavolatil

  • Posts: 131
Re: FCEUX 2.2.2 - update 2014-02-10
« Reply #97 on: May 05, 2014, 04:25:39 am »
Thanks, man.
Your patch is approved! :)

Not a problem, just trying to help where I can.  Thank you for the great port!

As promised, here is control mapping. :)

-Navigate to /Settings/Control Settings
-Press SELECT on the desired button (editing will be denoted by a ">>")
-Press any of the four keys (X Y A B).

Notes:
-Error handling will not allow mapping of same key more than once.
-Controls map on a per-game instance just like the rest of the config menus. 
 Make sure to use the "Save config as default" option under the "Settings" menu if you want all games to reflect   
 mappings.


http://www.sendspace.com/file/0lg4q1

Other adjustments:
-Fixed indexing on video_settings menu
-Slowed down ROM selection scrolling speed per Gab's suggestion.

Source is also included to be reviewed and added to GIT.

Enjoy!
duuuuude! thanks!

Xaijiqq

  • Posts: 450
Re: FCEUX 2.2.2 - update 2014-02-10
« Reply #98 on: May 05, 2014, 05:17:06 am »
works like a charm, thanks Warrior!  also the ROM selection scrolling speed is a nice improvement from your previous release  ;) before, paging through the list (left/right with the dpad) was a little too fast but now it feels just right

dmitry_smagin (OP)

  • Posts: 423
Re: FCEUX 2.2.2 - update 2014-02-10
« Reply #99 on: May 05, 2014, 05:39:55 am »
Thanks, man.
Your patch is approved! :)

Not a problem, just trying to help where I can.  Thank you for the great port!

As promised, here is control mapping. :)

-Navigate to /Settings/Control Settings
-Press SELECT on the desired button (editing will be denoted by a ">>")
-Press any of the four keys (X Y A B).

Notes:
-Error handling will not allow mapping of same key more than once.
-Controls map on a per-game instance just like the rest of the config menus. 
 Make sure to use the "Save config as default" option under the "Settings" menu if you want all games to reflect   
 mappings.


http://www.sendspace.com/file/0lg4q1

Other adjustments:
-Fixed indexing on video_settings menu
-Slowed down ROM selection scrolling speed per Gab's suggestion.

Source is also included to be reviewed and added to GIT.

Enjoy!

Thanks,
added to git:
https://github.com/dmitrysmagin/fceu320-rzx50/commit/51e48aca379f393f3bf2452b9268dc899c6502e8
GCW-Zero prototype, Dingoo a320, Ritmix rzx-50, Dingoo a380, Xperia Play

 

Post a new topic