Author Topic: FCEUX 2.2.3 - UPDATE 2016-08-23  (Read 66219 times)

gustavolatil

  • Posts: 131
Re: FCEUX 2.2.2
« Reply #40 on: December 26, 2013, 11:32:13 pm »
pal titles run a bit faster than normal, it happens in blaster master and tmnt fighting edition (or whatev)
anyone with the same problem or a solution?
Try manually setting FCEUX to PAL mode.
done, but the problems persist. blaster master is way too fast, like super mario kart

iames85

  • Posts: 65
Re: FCEUX 2.2.2
« Reply #41 on: December 27, 2013, 12:10:30 pm »
I had the same problem. I also tried to manually fix pal settings too, however the sound would start off fine and then about five seconds it would speed up again. I also noticed that the sound was out by a few seconds with any game I played. The only solution that fixed it for me was to completely remove my Europe version games and replace with US versions instead.

dmitry_smagin (OP)

  • Posts: 423
Re: FCEUX 2.2.2
« Reply #42 on: December 27, 2013, 01:13:59 pm »
All games are forcefully set to 60Hz to allow tearing-free scrolling on GCW-Zero. That's why 50Hz games run faster. PAL setting has a different meaning - it's intended for those rare games (like Elite) which rely heavy on PPU timings, more specifically PAL version. Without this all raster effects would be screwed.
GCW-Zero prototype, Dingoo a320, Ritmix rzx-50, Dingoo a380, Xperia Play

iames85

  • Posts: 65
Re: FCEUX 2.2.2
« Reply #43 on: December 27, 2013, 04:23:42 pm »
All games are forcefully set to 60Hz to allow tearing-free scrolling on GCW-Zero. That's why 50Hz games run faster. PAL setting has a different meaning - it's intended for those rare games (like Elite) which rely heavy on PPU timings, more specifically PAL version. Without this all raster effects would be screwed.
Thanks d_smagin that makes a lot of sense. Its a great emulator and all the games that I have tried run smooth. Thanks for your hard work

glimmer

  • Posts: 119
Re: FCEUX 2.2.2
« Reply #44 on: December 28, 2013, 01:13:25 am »
I'm confused. How does the Game Genie emulation work? Or does it? I can't toggle it from '0' to '1' in the GUI. If it does work, how do you use it?

kaio

  • Posts: 216
    • All about GCW-Zero on Russian + Repo
Re: FCEUX 2.2.2
« Reply #45 on: December 28, 2013, 06:31:55 pm »
Glimmer, I try to activate Game Genie. Can I put the GG Rom to config folder or something else to use GG?
GCW-Zero | JXD S602

glimmer

  • Posts: 119
Re: FCEUX 2.2.2
« Reply #46 on: December 29, 2013, 07:27:01 am »
Glimmer, I try to activate Game Genie. Can I put the GG Rom to config folder or something else to use GG?
I have no idea why you're asking me.

BlockABoots

  • Posts: 131
Re: FCEUX 2.2.2
« Reply #47 on: January 01, 2014, 02:23:31 pm »
Any chance of an update so it saves your location of your rom folder?
« Last Edit: January 01, 2014, 02:28:48 pm by BlockABoots »

gustavolatil

  • Posts: 131
Re: FCEUX 2.2.2
« Reply #48 on: January 01, 2014, 02:37:35 pm »
Any chance of an update so it saves your location of your rom folder?
it does
1. highlight fceux icon on gmenu
2. press select
3. edit fceux
4. select directory
5. ? ? ? ?
6. profit!

BlockABoots

  • Posts: 131
Re: FCEUX 2.2.2
« Reply #49 on: January 01, 2014, 04:16:08 pm »
Any chance of an update so it saves your location of your rom folder?
it does
1. highlight fceux icon on gmenu
2. press select
3. edit fceux
4. select directory
5. ? ? ? ?
6. profit!

Errr no it doesn't have the 'Edit' function as stated before!

GuyInDogSuit

  • Posts: 65
Re: FCEUX 2.2.2
« Reply #50 on: January 11, 2014, 05:51:46 am »
This is a great emulator, nice features, but my only question is, has anyone gotten a game playable with max sound settings (quality 2, lowpass on, 48000 KhZ)? It runs really laggy unless I set it to 32000 and set the options to off. And even then, games sometimes run choppy for a minute or so. I can't get it to run at max framerate at all.

Also, what BlockABoots said is correct, there is not an option to set the directory.

And how do I use Game Genie?
« Last Edit: January 11, 2014, 06:03:03 am by GuyInDogSuit »
"We are all searching for others whose demons play well with ours."

tjsooley

  • Posts: 27
Re: FCEUX 2.2.2
« Reply #51 on: January 16, 2014, 01:15:42 pm »
Glimmer, I try to activate Game Genie. Can I put the GG Rom to config folder or something else to use GG?
I have no idea why you're asking me.
I am also wondering how to get game genie working

kaio

  • Posts: 216
    • All about GCW-Zero on Russian + Repo
Re: FCEUX 2.2.2
« Reply #52 on: January 18, 2014, 02:58:15 pm »
Ok! I did It! GG is working now on my GCW.
1. open /usr/local/home/.fceux/fceux.cfg (I used glutexto from Ziz's repo)
2. Find the string "SDL.GameGenie = 0" and change it to 1 - "SDL.GameGenie = 1" (without "")
3. Download GameGenie ROM, my ROM was "Game Genie (USA) (Unl).nes" - 24,0 KB (24 592 bytes) from emuparadise.me
4. Rename it to "gg.rom"
5. Copy "gg.rom" to /usr/local/home/.fceux/
6. Profit!!!

If you start the game before you edit fceux.cfg you must find ROM_name.cfg in cfg folder and edit it from step 2.

Now all time you will start the ROM the GameGenie ROM will be started first.
Enter CODE and press start to play.
Enjoy!
« Last Edit: January 19, 2014, 07:36:09 am by kaio »
GCW-Zero | JXD S602

dmitry_smagin (OP)

  • Posts: 423
Re: FCEUX 2.2.2
« Reply #53 on: January 19, 2014, 08:34:27 am »
Ok! I did It! GG is working now on my GCW.
1. open /usr/local/home/.fceux/fceux.cfg (I used glutexto from Ziz's repo)
2. Find the string "SDL.GameGenie = 0" and change it to 1 - "SDL.GameGenie = 1" (without "")
3. Download GameGenie ROM, my ROM was "Game Genie (USA) (Unl).nes" - 24,0 KB (24 592 bytes) from emuparadise.me
4. Rename it to "gg.rom"
5. Copy "gg.rom" to /usr/local/home/.fceux/
6. Profit!!!

If you start the game before you edit fceux.cfg you must find ROM_name.cfg in cfg folder and edit it from step 2.

Now all time you will start the ROM the GameGenie ROM will be started first.
Enter CODE and press start to play.
Enjoy!

Unblocked enabling Game Genie from gui.
Download opk: http://www.sendspace.com/file/ghhert

Also, added GG info to the first post.
GCW-Zero prototype, Dingoo a320, Ritmix rzx-50, Dingoo a380, Xperia Play

polyh3dron

  • Posts: 1
Re: FCEUX 2.2.2
« Reply #54 on: January 29, 2014, 09:01:51 am »
Does this emulator run most games kind of slow for anyone else on the GCW Zero?  It's weird because this thing seems to be able to run SNES games without breaking a sweat but chugs with NES games.  Any settings I should try to get a smooth 60FPS on the GCW Zero?

GuyInDogSuit

  • Posts: 65
Re: FCEUX 2.2.2
« Reply #55 on: January 29, 2014, 09:04:10 am »
Does this emulator run most games kind of slow for anyone else on the GCW Zero?  It's weird because this thing seems to be able to run SNES games without breaking a sweat but chugs with NES games.  Any settings I should try to get a smooth 60FPS on the GCW Zero?


You're not alone. I've given up on this emulator for the time being because it lags intermittently even on moderate settings. I don't get it.
"We are all searching for others whose demons play well with ours."

Gab1975

  • Posts: 1165
Re: FCEUX 2.2.2
« Reply #56 on: January 29, 2014, 03:40:22 pm »
Does this emulator run most games kind of slow for anyone else on the GCW Zero?  It's weird because this thing seems to be able to run SNES games without breaking a sweat but chugs with NES games.  Any settings I should try to get a smooth 60FPS on the GCW Zero?

Strange... I tried various games and all of them run at full speed !

PS: I set "no scaling" (video) and "22.05 KHz" (audio sample-rate).

GuyInDogSuit

  • Posts: 65
Re: FCEUX 2.2.2
« Reply #57 on: January 29, 2014, 06:42:17 pm »
Strange... I tried various games and all of them run at full speed !

PS: I set "no scaling" (video) and "22.05 KHz" (audio sample-rate).

I'll try those settings but I see no reason why this emulator can't run higher settings with no issue.
"We are all searching for others whose demons play well with ours."

hi-ban

  • Posts: 878
Re: FCEUX 2.2.2
« Reply #58 on: January 29, 2014, 07:28:06 pm »
-In Sound Setup, set Quality to 0. For some reason, setting it at 1 or 2 slows everything down (and does not sound better at all).

-In Main Setup, set PAL to 0. For some reason, setting it to 1 makes it have a huge sound lag.

That's all. You can set all the other options the way you like, increase the sound rate all you want, and use fullscreen scalers.
« Last Edit: January 29, 2014, 07:31:41 pm by hi-ban »

GuyInDogSuit

  • Posts: 65
Re: FCEUX 2.2.2
« Reply #59 on: January 30, 2014, 12:55:01 am »
It's also worth mentioning that sometimes lag will continue until a ROM reset or exit.
"We are all searching for others whose demons play well with ours."

 

Post a new topic
Post a new topic