Author Topic: Temper (PC-Engine CD Emulator)  (Read 2948 times)

Timepilot2084 (OP)

  • *
  • Posts: 35
    • Facebook Page
Temper (PC-Engine CD Emulator)
« on: May 10, 2014, 11:14:51 am »
Here's a working link for Temper.  Be sure to read the description, as it is a Dingoo release.  There's some key mapping issues, but it works great once you get it mapped correctly.  After unzipping, place the folder somewhere on your Zero.  Then, navigate to the "emulators" page and press SELECT.  Highlight "Add link in emulators," and find your Temper folder.  Just select the "temper.dge" file, and you should be good to go.  It even adds the correct icon automatically.  By-the-way, HuCards must be in an unzipped state to be recognized by the emulator.   ;)

http://www.theisozone.com/downloads/misc/freeware/temper---gcw-zero---turbo-grafx-pc-engine-cd-emulator/
« Last Edit: May 11, 2014, 11:57:53 am by Timepilot2084 »
Timepilot2084
timepilot2084 AT gmail.com
@rob_conder

bigtuna

  • *
  • Posts: 8
Re: Temper (PC-Engine CD Emulator)
« Reply #1 on: May 12, 2014, 07:06:55 am »
I had this working under the old firmware, but not the new.  What firmware are you using?  Thanks!



bigtuna

  • *
  • Posts: 8
Re: Temper (PC-Engine CD Emulator)
« Reply #3 on: May 12, 2014, 10:12:31 pm »
Thanks so muck kaio, I missed there was an opk now.  Using the opk where should I be putting my System Card images?  Thanks again!




Timepilot2084 (OP)

  • *
  • Posts: 35
    • Facebook Page
Re: Temper (PC-Engine CD Emulator)
« Reply #4 on: May 13, 2014, 08:46:17 am »
I'm using the May 4th update, and it's working on my device.  Haven't tried the OPK yet, though.  I have Temper on the SD card.
Timepilot2084
timepilot2084 AT gmail.com
@rob_conder

 

Post a new topic
Post a new topic