• HomeBoards
  • RulesRules
  • HelpHelp
  • WikiWiki
  • Donate

Author Topic: How Can I get the 'Unreal Spectrum' emulator to work?  (Read 6277 times)

montezuma

  • Guest
How Can I get the 'Unreal Spectrum' emulator to work?
« on: July 14, 2010, 06:34:37 pm »
hi, there is a zx spectrum emulator i wanted to try on my dingux, but i cant get it to load (i am using local pack 35, gmenu2x)

here it is:     http://unrealspeccyp.googlecode.com/files/unreal-speccy-portable_0.0.8_dingoo.zip

in the zip file, i am running the 'uspili_9331.app' as instructed in the readme, but the emulator wont load and instead goes back to gmenu. i know there is another spectrum emulator available but i wanted to try this one.

i tried to rename the .app file to .dge but it didnt help

does anyone have any ideas as to why it wont load? or maybe someone else could see if it loads on their dingux system, and if it works for you, maybe tell me how you got it to load please?
« Last Edit: July 14, 2010, 06:37:02 pm by montezuma »
Logged

Chris23235

  • Posts: 603
Re: How Can I get the 'Unreal Spectrum' emulator to work?
« Reply #1 on: July 14, 2010, 06:53:41 pm »
This emulator is for the native firmware of the Dingoo and not for Dingux.
Logged

montezuma

  • Guest
Re: How Can I get the 'Unreal Spectrum' emulator to work?
« Reply #2 on: July 14, 2010, 07:47:42 pm »

ok so it would need to be 'ported' so to speak?

is that difficult?   :D
Logged

eule

  • * Former Staff
  • Posts: 889
Re: How Can I get the 'Unreal Spectrum' emulator to work?
« Reply #3 on: July 14, 2010, 08:05:37 pm »
There?s a good speccy emulator for dingux too.  :D
http://dingoowiki.com/index.php/Gp2Xpectrum
Logged

Friendly Neighborhood Dingoonity Troll

  • Posts: 543
Re: How Can I get the 'Unreal Spectrum' emulator to work?
« Reply #4 on: July 14, 2010, 09:13:50 pm »
And why don't you just use the native firmware?
Logged

montezuma

  • Guest
Re: How Can I get the 'Unreal Spectrum' emulator to work?
« Reply #5 on: July 14, 2010, 09:51:51 pm »

ok thanks i will try it using the native firmware

ps. i did not have much luck with the regular gp2xpectrum, i noticed the game jet set willy did not run very well until i overclocked to 400mhz.. which seemed a bit 'extreme' for a spectrum emulator
Logged

eule

  • * Former Staff
  • Posts: 889
Re: How Can I get the 'Unreal Spectrum' emulator to work?
« Reply #6 on: July 14, 2010, 09:59:19 pm »
Oh OK, i only tried a few demos, and they ran all fullspeed @ 200 mhz, so i assumed it?d be the same with games...
Logged

Chris23235

  • Posts: 603
Re: How Can I get the 'Unreal Spectrum' emulator to work?
« Reply #7 on: July 15, 2010, 03:43:35 pm »
Quote from: montezuma on July 14, 2010, 09:51:51 pm
i did not have much luck with the regular gp2xpectrum, i noticed the game jet set willy did not run very well until i overclocked to 400mhz.. which seemed a bit 'extreme' for a spectrum emulator


Then you definitely made something wrong, I tried it myself, GP2x Spectrum starts with a clockspeed of 250 MHz and runs Jet Set Will with 100% at this clockspeed.
Logged

pornocrat

  • Posts: 13
Re: How Can I get the 'Unreal Spectrum' emulator to work?
« Reply #8 on: February 04, 2014, 04:56:09 pm »
unreal-speccy-portable_rev527_dingux - .z80 files plays as great as they should. But i did not get how to launch tape files (.tap .tzx). I`m loading file, then typing "I" on vk, and next i'm in dead end - what exactly i need to type? LOAD"" or LOAD "file name", or load, or something?
Logged

pornocrat

  • Posts: 13
Re: How Can I get the 'Unreal Spectrum' emulator to work?
« Reply #9 on: February 04, 2014, 06:02:29 pm »
AAAAAA!!!!! RAGE11111
Why? why making HELP files like this?! http://code.google.com/p/unrealspeccyp/wiki/readme_dingoo
It is absolutely WRONG. To launch .tzx files no need to start basic in all.
1. Press SELECT to open menu.
2. Choose .tzx
3. Press Start for virtual keyboard.
4. Type U on it to start tape loader.
5. Press Select again and choose Start Tape in menu. Toogle Fast Tape option.
6. Wait for loading.
Logged

pornocrat

  • Posts: 13
Re: How Can I get the 'Unreal Spectrum' emulator to work?
« Reply #10 on: February 18, 2014, 11:22:44 am »
New problem - i downloaded 3 images: NLO Vrag Neizvesten, UFO 2, Elite 3. All in .TRD format. After selecting any of them in "open file" i got "segmentation error". Is this games are to "heavy" for A-320?
Logged

pornocrat

  • Posts: 13
Re: How Can I get the 'Unreal Spectrum' emulator to work?
« Reply #11 on: February 18, 2014, 11:40:53 am »
Solved. I tried out speccy version for native firmware, all working.
Logged
Pages: [1]
 

Post a new topic
Post a new topic