Author Topic: Need help Micromax G3100(JXD1000)  (Read 1820 times)

a330boy (OP)

Need help Micromax G3100(JXD1000)
« on: March 18, 2015, 12:48:12 pm »
HELLO
I Need help with this PMP its says that is Micromax G3100 but board says jxd1000c_0920
i try some firmware from net but no avail only black screen.Firmware on the net are old my board says it is 2013 model.Look like it struck in ISP mode

can somebody help with that or at least universal firmware

Full detail
Micromax G3100
Board id : jxd1000c_0920
cam: m1302
chip: 0100058-1229-c (?what is this chip sunplus spmp8000?)
lcd :zbh043gt - 10v6

kurtbilisim

Re: Need help Micromax G3100(JXD1000)
« Reply #1 on: November 03, 2015, 07:52:27 pm »
Hello. I opened my JXDA1000 device to read camera info and my board id seems to be exactly the same. So I can suggest trying A1000_20130531 firmware from http://www.jxdofficial.com/firmware.

The camera doesn't work on my end but perhaps it will help you to at least run the device.

Btw incase anyone is wondering, I couldn't see my camera code, there's a text on the circuit band attached to it like "0838A" but I'm not sure if that's it. There was a sticker behind the camera, I looked under it and still no other code.

 

Post a new topic