Author Topic: OpenDingux for GCW0 on NEOGEO-X  (Read 8223 times)

carlos_wong (OP)

  • *
  • Posts: 7
OpenDingux for GCW0 on NEOGEO-X
« on: March 13, 2014, 09:58:00 am »
hi all
I make a gcw0 image for NEOGEO-X. if you have a NEOGEO-X in hand I think it is interest to run the gcw0 on NEOGEO-X

At the first, the NEOGEO-X use Ingeinc JZ4770 same with the gce0 zero, so all the software must be compatible.

And these is the different:

1. 256M DDR
2. 4.3" 480x272 LCD screen
3. more keys, but now I just use part of them
4. extern Card, you know

So I just add a screen driver and a key driver. And make some change to fix the conflict of the hardware's logic.

key define:
1.L1         -> L
2.R1         -> R
3.L2         -> power
4.menu    -> select
5.start      -> start
6. D-pad   -> D-pad
7. A B C D -> A B C D

Ok, these is the most important.

the image url:  https://mega.co.nz/#!fYwwmTRJ!tbmOuPyIoMWAfgBS-MjIQWISAvx7o6MbYYVEuGyBU7g
usage: https://github.com/gcwnow/ingenic-boot/wiki same with the gcw0 :)
but you need use the 256M DDR. so change the command as this:

sudo ./ingenic-boot --mbr=mbr.bin --config=gcw0_v11_ddr2_256mb --boot=ubiboot-v11_ddr2_256mb.date.bin --system=system.bin --data=data.bin

PS. I have not a GCW0 on my hand, so I don't know how the ingeic-boot work on GCW0. But on NEOGEO-X you need run the command twice, the first time is must be fail every time. So every time you burn the image you need run the command twice.

And if you do not own a linux system computer, I also make a jailbrek image for the https://www.facebook.com/neogeoxjailbreakhack‎


I will upload the image compatible with jailbreak cable  later.

If you have any question or idea, welcome :)

the source code is : https://github.com/carlos-wong/linux/tree/personal/carlos/neogeox/release/v0.1
« Last Edit: March 13, 2014, 02:44:35 pm by Surkow »

pcercuei

  • ***
  • Posts: 1395
    • GitHub
Re: gcw0 on NEOGEO-X
« Reply #1 on: March 13, 2014, 10:18:05 am »
That's pretty cool! Good job on this! Did you have to modify the system partition at all? Or are you using the Zero's directly without any issues? Are things like gmenu2x and pwswd still working?

dmitry_smagin

  • *
  • Posts: 398
Re: gcw0 on NEOGEO-X
« Reply #2 on: March 13, 2014, 11:45:29 am »
carlos_wong,

the name of thread is confusing, it should read 'opendingux for gcw0 on NEOGEO X'.

Btw, could you make some photos of NGX running gmenu2x or some application?
GCW-Zero prototype, Dingoo a320, Ritmix rzx-50, Dingoo a380, Xperia Play

carlos_wong (OP)

  • *
  • Posts: 7
Re: gcw0 on NEOGEO-X
« Reply #3 on: March 13, 2014, 02:15:28 pm »
That's pretty cool! Good job on this! Did you have to modify the system partition at all? Or are you using the Zero's directly without any issues? Are things like gmenu2x and pwswd still working?

I don't modify the system partition at all. the app preinstall in the data.bin is work fine :)

carlos_wong (OP)

  • *
  • Posts: 7
Re: gcw0 on NEOGEO-X
« Reply #4 on: March 13, 2014, 02:18:16 pm »
carlos_wong,

the name of thread is confusing, it should read 'opendingux for gcw0 on NEOGEO X'.

Btw, could you make some photos of NGX running gmenu2x or some application?

thanks, I still not figure out how to change the name of the thread :)

Surkow

  • * Administrator
  • S
  • Posts: 536
Re: OpenDingux for GCW0 on NEOGEO-X
« Reply #5 on: March 13, 2014, 02:45:05 pm »
Modified the thread name.

carlos_wong (OP)

  • *
  • Posts: 7
Re: OpenDingux for GCW0 on NEOGEO-X
« Reply #6 on: March 13, 2014, 02:52:57 pm »

carlos_wong (OP)

  • *
  • Posts: 7
Re: OpenDingux for GCW0 on NEOGEO-X
« Reply #7 on: March 14, 2014, 09:40:23 am »
here is some photo when run the games

relay01

Re: OpenDingux for GCW0 on NEOGEO-X
« Reply #8 on: March 14, 2014, 03:15:29 pm »
...  :o

Good stuff!

Drem

  • **
  • Posts: 759
    • Russian Android/Dingo/GCW/gaming gadgets blog
Re: OpenDingux for GCW0 on NEOGEO-X
« Reply #9 on: March 15, 2014, 10:53:45 am »
Please, upload some videos!

chansterling

Re: OpenDingux for GCW0 on NEOGEO-X
« Reply #10 on: March 15, 2014, 03:48:45 pm »
I am unbelievably excited for this!

I cannot wait for the Rocket Cable image. I will update and make a video as soon as that drops!

XxSwatsonxX

Re: OpenDingux for GCW0 on NEOGEO-X
« Reply #11 on: March 15, 2014, 05:39:58 pm »
Yeeeehawwww Dude,thats awesome,canīt wait for the Rocket Cable Version :D

zouzzz

Re: OpenDingux for GCW0 on NEOGEO-X
« Reply #12 on: March 19, 2014, 07:28:54 am »
Hello,
Newsed for french : http://neogeo-x.blogspot.com/2014/03/opendingux-pour-gcw-zero-sur-x.html

We wait the rocket cable version :)

thanks.

XxSwatsonxX

Re: OpenDingux for GCW0 on NEOGEO-X
« Reply #13 on: March 23, 2014, 11:01:50 am »
hmmmm,looks like no "RC" Version will come :(

kahuna

Re: OpenDingux for GCW0 on NEOGEO-X
« Reply #14 on: May 18, 2014, 12:27:59 pm »
Thanks a lot Carlos!

Now everybody is waiting for the Rocket Cable version, is there anyway we can help you to create that version? ;)