[S7300][Custom Firmware] NCCE 1.1 [New]2.0 Soon

[scarlatblack]

Yes. Give also a look at Vektor web site. There you will get fresh news

[Remilia]

Hello,

Just got my S7300 and I tried the tutorial and followed:
1. Backup all data from your device.(Keep a backup of your apps and files on pc)
2. Download the NCCE_v1.1_googleplay.rar from the NCCE v1.1 link below and unzip it.  You should have the following files:
- factory_update_param.aml
- patch_NCCE.zip
- update_NCCE.zip
3. Place all 3 files to the root of your sd card.
4. With the device off place the sd card in it, press the Vol+ and Power buttons at the same time until it enters the upgrade menu.
5. Wait untill greeted by the NCCE install screen.Here choose your options like sd swap, launcher, extra aplications and CPU speed. Once the device is finished it will reboot back to system fully updated. Enjoy the upgrade!


after following this and rebooting, my pad just has a black screen.. Anyone know how to fix this?

Sorry if this was answered previously I read some of this thread, but couldn't find an answer...

[lizardule]

just wondering if version 2.0 was available yet and if so where to get it. thanks in advance

[scarlatblack]

Well...the post si very long.....but just read one page back!

[n3hm3h]

Hi im new to all this, i am about to receive my JXD s7300 in a week or so. Can anyone please help me as far as getting the latest cfw for it or point me in the right direction any help would be great thanks in advance!

[mobyd]

Hi im new to all this, i am about to receive my JXD s7300 in a week or so. Can anyone please help me as far as getting the latest cfw for it or point me in the right direction any help would be great thanks in advance!

I would suggest using skelroms legacy firmware. it is the most stable.
If you need bluetooth dongle support ( bluetooth using an external dongle) then I would use skelrom. It is the only one that I know of that has bluetooth dongle support.

I would suggest doing a search (google too) of the firmware you want and reading the entire threads before you start. You will learn from others mistakes before you brick.

If you are squimish, don't do it.

[n3hm3h]

Thanks for the advice, i just have a few questions. So i should google "Latest Skelton firmware for s7300? And what is dongle and why would i need it? Does this Skelton firmware have kitkat 4.2 or higher? Sorry for the noob questions. Also if you can provide me with a direct link to the firmware and a tutorial. Thanks in advance!

[n3hm3h]

Hi im new to all this, i am about to receive my JXD s7300 in a week or so. Can anyone please help me as far as getting the latest cfw for it or point me in the right direction any help would be great thanks in advance!

I would suggest using skelroms legacy firmware. it is the most stable.
If you need bluetooth dongle support ( bluetooth using an external dongle) then I would use skelrom. It is the only one that I know of that has bluetooth dongle support.

I would suggest doing a search (google too) of the firmware you want and reading the entire threads before you start. You will learn from others mistakes before you brick.

If you are squimish, don't do it.

Thanks for the advice, i just have a few questions. So i should google "Latest Skelton firmware for s7300? And what is dongle and why would i need it? Does this Skelton firmware have kitkat 4.2 or higher? Sorry for the noob questions. Also if you can provide me with a direct link to the firmware and a tutorial. Thanks in advance!

[mobyd]

Thanks for the advice, i just have a few questions. So i should google "Latest Skelton firmware for s7300? And what is dongle and why would i need it? Does this Skelton firmware have kitkat 4.2 or higher? Sorry for the noob questions. Also if you can provide me with a direct link to the firmware and a tutorial. Thanks in advance!

http://www.openhandhelds.net/forum2/index.php?/topic/360-rom-legacyrom-hfw-for-s7300b/
directions are in the thread. suggest you follow them.


7300 does not come with bluetooth chip. if you want to use bluetooth you need an external dongle and firmware that supports it. skelrom is the only one I know of that has it.

[MightyJAK]

Go to Vektor's video here: http://www.youtube.com/watch?v=nx34AmNwdQs
In the description to this video, click on the 2.1 Firmware and USB tool link and download that.

I'm trying to unbrick but getting the stop at step 18 error with the USB burning tool that comes with the latest firmware (where it disconnects from being recognized as Worldcup device around 75percent). So I want to try this method, but both links for the 2.1 firmware (661yx and willgoo) are dead. Can someone please upload a mirror?

[BensJammin]

Does anyone have a mirror for the download please? The link doesnt work

[okayvin]

bump for mirror?