Author Topic: Replace Dingoo A320 LCD(from ILI9338 to ILI9325)  (Read 5115 times)

Steward (OP)

  • *
  • Posts: 149
    • Steward's tutorial website
Replace Dingoo A320 LCD(from ILI9338 to ILI9325)
« on: November 01, 2012, 03:51:07 am »
Firstly, my english is not good :)

Currently, the LCD's drive IC of Dingoo A320 is ILI9338 that have some blue color and brightness problem.
This is very very bad because I can't play game very long time.
So, i decide to replace it from original ILI9338 to ILI9325.
The result is the native system can't enter and can only run dingux and the color is very nice :)

If some body can tell me how to fix the native system problem, I will very appreciate. :)

http://home.educities.edu.tw/fushiyun2000/dingoo_a320_hardware_replace_lcd_to_ili9325.htm
Logged
Steward Fu

Steward (OP)

  • *
  • Posts: 149
    • Steward's tutorial website
Re: Replace Dingoo A320 LCD(from ILI9338 to ILI9325)
« Reply #1 on: November 01, 2012, 01:18:22 pm »
UPDATE:
I have solved the white screen problem when enter the native system by just rewrite the bootloader by using unbrick tool. :)
Logged
Steward Fu

_guybrush_

  • *
  • Posts: 17
Re: Replace Dingoo A320 LCD(from ILI9338 to ILI9325)
« Reply #2 on: November 07, 2012, 10:18:18 pm »
Hi! :) Just a question... Where have you succeeded with finding the replacement screen? I've searched everywhere but it is always out of stock. Thanks for your reply and have a good day!
Logged

Steward (OP)

  • *
  • Posts: 149
    • Steward's tutorial website
Re: Replace Dingoo A320 LCD(from ILI9338 to ILI9325)
« Reply #3 on: November 30, 2012, 08:27:52 am »
Logged
Steward Fu

_guybrush_

  • *
  • Posts: 17
Re: Replace Dingoo A320 LCD(from ILI9338 to ILI9325)
« Reply #4 on: December 01, 2012, 04:05:13 pm »
Hi and thanks for your reply. That's it, exactly what I needed! The problem is that I'm not from China and even trying to translate the page with Google Translate I couldn't understand if this seller sends the goods to Europe too, how much does postage cost and what kind of payments does he accept. I have to dig deeper into that page.
Please tell me if you know something more. Thanks and have a good day! :)
Logged

_guybrush_

  • *
  • Posts: 17
Re: Replace Dingoo A320 LCD(from ILI9338 to ILI9325)
« Reply #5 on: December 01, 2012, 04:20:56 pm »
Hello again. I couldn't find any useful contact detail on that page: do you happen to have an e-mail address from that seller? Also, all the comments on that page are quite old (the most recent one are from 2010): have you just bought the screen from him? Thanks!
Logged

Steward (OP)

  • *
  • Posts: 149
    • Steward's tutorial website
Re: Replace Dingoo A320 LCD(from ILI9338 to ILI9325)
« Reply #6 on: December 02, 2012, 02:30:46 pm »
you have two ways to contact the seller:
1. install the QQ software and then contact the seller.
2. register an account from Taobao and ask some question with the seller in on-line.

the comment is very old, so you should see the trade record.
the last trade record is on 2012-11-26 15:23:37.

:)
Logged
Steward Fu

Unseen

  • Posts: 2
Re: Replace Dingoo A320 LCD(from ILI9338 to ILI9325)
« Reply #7 on: December 19, 2014, 09:12:48 am »
i have the same screen, and the same white screen problem on native os, when i'm trying to use unbrick tool it says SDRAM error, and nothing happened. What could i do?
Logged

Steward (OP)

  • *
  • Posts: 149
    • Steward's tutorial website
Re: Replace Dingoo A320 LCD(from ILI9338 to ILI9325)
« Reply #8 on: December 22, 2014, 10:18:23 am »
Could you share the screen image for this issues ?
Logged
Steward Fu

Unseen

  • Posts: 2
Re: Replace Dingoo A320 LCD(from ILI9338 to ILI9325)
« Reply #9 on: April 23, 2015, 02:14:39 pm »
Hello,
I still could not restore my dingoo,
unbrick tool says SDRAM error, after that device became unmounted in device manager.



somehow tried to restore it i broke the dingux loader too :(, and when i try to restore the dingux,
i stuck at command usbtool-win 1 zImage_dual_boot_installer_ILI9325 0x80600000

the only possibility to pass this screen is to choose zImage_dual_boot_installer_ILI9338, but then my dingoo turn on white screen, and there is nothing that i could do, cause my new screen is ili9325, and old was ili9338.

Any ideas what could i do?
will unbrick tool works with old screen? or i have to resolder sdram chip? or maybe there is some software fix?
Logged
Pages: [1]